Monster Blaster 3.0 Water-resistant portable Bluetooth® speaker (Black)

Features

Water-Resistant (IPX5): The Monster Blaster 3.0 portable Bluetooth speaker is water-resistant and IPX5-rated. The IPX5 rating means it can withstand a sustained, low-pressure water jet spray. Suitable for rain or shine, you can feel confident bringing the Blaster 3.0 speaker by the pool, to the park, on your camping trip, and other adventures.

• There is an integrated rubber cover that protects the Aux input, Mic input, USB-A port, and AC power adapter jack. This integrated cover needs to remain on for the speaker to be fully IPX5-rated.
• The Monster Blaster 3.0 is water-resistant, but not waterproof. It should never be submerged in water or other liquids, or subjected to heavy rain or intense water spray.

Full-Range Sound: The Monster Blaster 3.0 houses a total of seven combined speakers including four 2.25" full-range drivers, one 5.75" subwoofer, and two passive radiators for a frequency response of 80Hz to 15kHz. The four full-range drivers are front-firing (two on each side), while the subwoofer and two passive radiators are down-firing. The Monster Blaster 3.0 delivers 120 watts of power (15W x 4ch for the full-range drivers and 60W x 1ch to the subwoofer) for dynamic and clear sound at any volume level without distortion.

Bluetooth 5.1: The Monster Blaster 3.0 speaker features built-in Bluetooth 5.1 with support for wireless audio streaming (A2DP 1.2) and control AVRCP (1.2). The speaker system offers SSP and NFC pairing for easy connection. You can pair multiple Bluetooth-enabled devices to the Blaster 3.0, but only one device can be connected and used at a time. It has a Bluetooth wireless range of approximately 30-feet.

• Wireless Audio Streaming: You'll be able to wirelessly streaming stored music, music apps, and other audio content on your Bluetooth-enabled smartphone, tablet, laptop, or desktop computer to the Blaster 3.0 speaker. Playback control and song/artist/album information will still be done from your Bluetooth-source device.
• SSP & NFC Pairing: Secure Simple Pairing (SSP) lets you pair the Blaster 3.0 speaker and your Bluetooth-enabled device without any complicated pin-codes. Near Field Communication (NFC) goes a step further and lets you pair your Bluetooth-enabled Android device with the Blaster 3.0 speaker by simply touching the Android device to the side of the speaker.

Aux & Mic Inputs: In addition to Bluetooth, the Blaster 3.0 speaker is equipped with a 3.5mm Aux input and a 3.5mm Mic input. The 3.5mm Aux input lets you connect an external portable device that lacks Bluetooth, but does have an analog output or headphone jack. The 3.5mm Mic input lets you connect a dynamic microphone (sold separately), so you can sing along to your music through the speaker.

USB-A Power Bank: The Monster Blaster 3.0 features a built-in USB-A power bank and is outfitted with a USB-A charging port (5V/2A) to charge your portable electronic devices, like your smartphone or tablet. The built-in power bank has a battery life of up to 12 hours.

Power Requirements: The Monster Blaster 3.0 can be powered via the included AC power adapter or its built-in lithium-ion rechargeable battery (11.1V/5200mAH). The built-in rechargeable battery offers up to 12 hours of music playback time (dependent on volume level and audio content). The AC power adapter can be used to recharge the battery. It takes approximately 6.5 hours to fully charge the battery.

Side-Mounted Controls: The Monster Blaster 3.0 features convenient side-mounted push-button controls that operate Power On/Off, EQ Mode, Volume Up/Down, and Bluetooth Pairing.

Carry Handle: An integrated carry handle makes it easier to transport the Monster Blaster 3.0 portable Bluetooth speaker indoors and outdoors. The portable Bluetooth speaker only weighs 12.95 lbs.