About the Bavsound Ghost BMW Underseat Subwoofers V3 8-ohm

Product highlights:
- two BMW-specific subwoofers
- designed to fit directly in the underseat locations in select BMW models (no mods needed)
- BMW speaker harness plugs directly into new subs
- polypropylene cone with dampened steel basket
- 8-ohm impedance compatible with BMW amplifier
- power handling: 160 watts RMS (320 peak)
- frequency response: 40-200 Hz
- warranty: 4 years
- MFR # BSD.GUSW.8O-KIT
- Item # 447SUB8O
What's in the box:
Bavsound Ghost BMW Underseat Subwoofers V3 8-ohm owner's manual
If you need assistance accessing this owner's manual, please give us a call.- Two vehicle specific subwoofers
- Customer note
More details on the Bavsound Ghost BMW Underseat Subwoofers V3 8-ohm

Features & specs
General | ||
---|---|---|
Speaker Size | Vehicle-specific | |
Driver Design | 1-way | |
Woofer Design | Cone | |
Woofer Material | Paper/Polypropylene | |
Woofer Surround | Rubber | |
Midrange Design | --- | |
Midrange Material | --- | |
Tweeter Design | --- | |
Tweeter Material | --- | |
Super Tweeter Design | --- | |
Super Tweeter Material | --- | |
Impedance (Ohms) | 8 | |
Weather-resistant | No | |
Grilles Included | Gray steel | |
Parts Warranty | 4 Years | |
Labor Warranty | 4 Years | |
Specifications | ||
Sensitivity (1W at 1 meter) | N/A | |
Sensitivity at 2.83 volts | N/A | |
Frequency Response | 40 - 0.2k Hz | |
Maximum RMS Wattage | 160 | |
Peak Power Handling (Watts) | 320 | |
Top-mount Depth (Inches) | 1 5/8 | |
Bottom-mount Depth (Inches) | N/A | |
Cutout Diameter or Length (inches) | 6 3/4 | |
Mounting Height (Inches) | 1 | |
Frame Width | 8.5 | |
Frame Length | 8.5 |
Product Research
Features
Mounting: The Ghost Subs are designed as direct replacements for the factory under-seat subwoofers in select BMW models. In most cases, the new sub has the same screw hole pattern as the factory sub and is a perfect fit. The factory grille is usually re-installed over the new subwoofer. Please enter your vehicle information to confirm fit.
Wiring: The BMW factory wiring harness plugs directly into the subwoofer frame.
Magnets: The sub uses a neodymium magnet to minimize size without giving up magnetic field strength.
Mounting: In the installation video Bavsound describes a method of tilting the seat back so the subwoofers can be installed without completely removing the seats.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
Waited awhile before submitting review to give these time to break in as recommended. Overall, a great improvement over stock. Much tighter bass response. Still not thumping low, but considering the form and function, worth the price to upgrade
Patrick from Ormond Beach, FL