About the Salamander Designs Acadia XL Wall Stand
Made for large displays
Made for large displays
This Salamander Designs Acadia wall stand is a great way to mount a large display in your home or office. The sturdy powder-coated steel stand can support a TV up to 85" and weighing up to 99 lbs. Its clever design places your screen against the wall and takes up almost no space in your room. The TV bracket can be installed in one of five height positions, spaced two inches apart.
Keep it tidy and safe
The stand's hollow column keeps cables and power cords out of sight and organized. Its white finish can be painted to blend with your wall.
The curved column lets you place the stand flat against the wall, even if you have floor molding. At the top of the stand is an elastomer stabilizing pad. This prevents slippage, keeping the stand secure once it's in place.
- for TVs and displays 40"-85"
- supports up to 99 lbs.
- fits VESA mounting hole patterns from 200 x 200mm to 600 x 600mm
- five screen height positions placed at two-inch intervals
- hollow column for cable management
- elastomer stabilizing pad at top of column
- heavy-gauge steel construction with paintable white finish
- overall dimensions (measured by Crutchfield): -32-1/4"W x 62-5/8"H x 12-5/16"D
- warranty: 2 years
- MFR # AC/W/XL600/WH
What's in the box:
- Upright post
- Upright bracket
- Top bracket
- Front bracket
- TV bracket
- Bracket cover
- Stabilizing pad
- 2 Rear pads
- 2 Back stops
- 3 Foot pads
- Four M6x20mm screws
- Four M6x30mm screws
- Four M6x40mm screws
- Four M8x20mm screws
- Four M8x30mm screws
- Four M8x40mm screws
- Four M8x50mm screws
- 12 Washers
- 6 Large hex-nuts
- Four 5mm spacers
- Two 8-16mm wall-mount adapters
- Two 16-24mm wall-mount adap;ters
- Two 24mm wall-mount adapters
- Two 32mm wall-mount adapters
- 7 Large hex-nuts
- 2 Small hex-nuts
- 12 Plastic washrs
- Anti-tip strap
- Anti-tip bracket
- Plastic cap
- Metal bar
- Assembly Instructions
Customer reviews for Salamander Designs Acadia XL Wall Stand
Average review:5.0 out of 5 stars
Thanks for submitting your review
More details on the Salamander Designs Acadia XL Wall Stand
Acadia Wall Stand: The stylish Acadia Wall Stand (AC/W/XL600/WH), by Salamander Designs, enables you to put a 40"-85" flat-screen TV that weighs up to 99 lbs against a wall without having to drill into your wall or run cables through your wall. The Acadia Wall Stand's elegant, ultra-slim design fits in beautifully in almost any living room, entertainment room, home office, bedroom, or any location where you want a TV displayed without taking up floor or wall space.
TV Compatibility: The Salamander Designs Acadia Wall Stand (AC/W/XL600/WH) can support 40"-85" flat-screen TVs that weigh up to 99 lbs and have 6mm (M6) or 8mm (M8) mounting holes that are spaced 200mm, 300mm, 400mm, 500mm or 600mm apart (horizontally). The TV's panel depth can only be up to 2.375" thick.
Note: The Acadia Wall Stand only attaches to the TV's top VESA mounting holes (not the bottom mounting holes).
Sturdy Anti-Tip Design: The Salamander Designs Acadia Wall Stand features a sturdy, anti-tip steel structure which makes a safe and reliable platform for your compatible flat-panel TV.
Adjustable Height: The Acadia Wall Stand provides adjustable height for the mounted flat-panel television. The height of the mounting bracket can be set between 50.25" and 58" in five 2" increments. The overall height of the mounted television will vary based on the screen size and dimensions of the television.
Sleek Form Factor: The Acadia Wall Stand features a sleek and slim form factory that positions the TV only 1.25" away from the back wall with an upright post that measures only 5.5" (wide) and a footprint that measures 32.25" (wide) x 12.3125" (depth).
Cable Management: A cable management channel along the back side of the Acadia Wall Stand hides your TV's AV cables and power cord for a neat and clean installation.