About the Salamander Designs Synergy Model 221
Stylish and roomy
Stylish and roomy
The Salamander Design Synergy System Model 221 features beautiful wood veneer surfaces and solid wood door frames, supported by anodized aluminum posts. This modern, attractive cabinet has two spacious compartments that offer plenty of storage for your home theater gear.
Two component compartments
The cabinet top can support a TV up to 42” and weighing up to 250 lbs. The door panels have perforated metal panels that allow IR signals from your remote to pass through, as well as air to ventilate your gear. They also effectively hide the components behind them. The hinges extend so you can fully open each door.
Modular options
The Model 221 can be assembled a number of ways. You can install the doors onto the compartments, or leave them off entirely. You can place the Model 221 on the floor, or remove the non-marking feet and mount the unit on the wall with an optional wall mounting kit.
The cabinet comes with two adjustable shelves. The supports slide along the aluminum frame, making the shelves infinitely adjustable. With a compatible Synergy PM2 mount you can attach your TV directly to the cabinet.
Good for the environment and the country
Salamander Designs uses only hardwoods harvested from managed forestry programs. Their frames are made from recycled aluminum, with environmentally friendly coatings and stains. And each Model 221 is built in the USA.
Product highlights:
- for use with TVs up to 42"
- 2 compartments for components
- cabinet top:
- 45-1/2"W x 19-3/4"D
- supports up to 250 lbs.
- 2 component compartments (each):
- interior dimensions 19-3/4"W x 17-3/4"H x 18"D
- supports up to 75 lbs.
- 2 adjustable shelves (each):
- 19-3/4"W x 18"D
- supports up to 75 lbs.
- removable compartment doors:
- hinges extend to open doors fully
- perforated metal panels
- ventilation openings to keep components cool
- removable back panel for easy access
- anodized aluminum frame
- cabinet can be wall mounted (must be mounted to wall studs or anchored to a brick, block, or concrete wall)
- removable non-marking leveling feet
- 44-1/2"W x 21"H x 19-3/4"D
- warranty: limited lifetime
- assembly required
- MFR # SB221M/A
What's in the box:
- Top shelf
- Bottom shelf
- 2 Adjustable shelves
- 2 Side-panels
- 2 Rear-panels
- 6 Aluminum posts
- 2 Doors
- 6 Joint connector bolts
- 6 Feet
- 6 Washers
- 6 Nuts
- 8 Shelf-pegs
- 8 Thumb-screw/nuts
- Hex-key
- Assembly Instructions
Reviews (4)
Customer reviews for Salamander Designs Synergy Model 221
Loading reviews...
Average review:
3.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Salamander Designs Synergy Model 221
Features & specs
| General Features | ||
|---|---|---|
| Type | TV Stand | |
| Stand Style | Cabinet | |
| Color | Maple | |
| Number of Shelves | 5 | |
| Number of Adjustable Shelves | 2 | |
| Number of Drawers | None | |
| Assembly Required | Yes | |
| Main Materials |
Wood Aluminum | |
| Wire Management | Yes | |
| Height (inches) | 21 | |
| Depth (inches) | 19-3/4 | |
| Stand Weight Limit | 550 lbs | |
| TV Shelf Weight Limit | 250 lbs | |
| TV Shelf Width | 44-1/2 | |
| TV Shelf Depth | 19-3/4 | |
| Parts Warranty | Limited Lifetime | |
| Labor Warranty | Limited Lifetime | |
Loading accessories...
Customer Q&A
1 question already asked
Loading articles...
