About the Rockford Fosgate R2D2-10

Product highlights:
- 10" subwoofer with dual 2-ohm voice coils
- mica-injected polypropylene cone with poly-foam surround
- stamped solid-steel frame
- power range: 50-250 watts RMS (500 watts peak power)
- frequency response: 45-250
- sensitivity: 87 dB
- top-mount depth: 4-7/16"
- sealed box volume: 0.59 cubic feet
- ported box volume: 1.4 cubic feet
- grille not included
- warranty: 1 year
- MFR # R2D2-10
- Item # 575R2D210
What's in the box:
Rockford Fosgate R2D2-10 owner's manual
If you need assistance accessing this owner's manual, please give us a call.- One 10" Dual 2-ohm voice coil subwoofer
- Eight 1-1/8" Allen head screws
- 4mm Allen head bit
- Installation/Operation manual (English/ French/ Spanish/ German)
More details on the Rockford Fosgate R2D2-10

Features & specs
Features and Specs | ||
---|---|---|
Size | 10-inch | |
Impedance (Ohms) | 1, 4 | |
Cone Material | Mica injected poly | |
Surround Material | Poly-foam | |
Basket Material | Steel | |
Grille | None included | |
Free-Air | No | |
Dual Voice Coil | Yes | |
Sensitivity |
87 dB at 1 watt | |
Frequency Response | 45 - 250 Hz | |
Max RMS Power Handling | 250 | |
Peak Power Handling (Watts) | 500 | |
Top Mount Depth (inches) | 4 7/16 | |
Bottom Mount Depth (inches) | N/A | |
Cutout Diameter or Length (inches) | 9 1/16 | |
Frame Width | 10.842 | |
Frame Length | 10.842 | |
Vas (liters) | 39 | |
Fs (Hz) | 35 | |
Qts | 0.47 | |
Xmax (millimeters) | 6.5 | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Box Requirements | ||
Ideal Sealed Box Volume (cubic feet) | 0.59 | |
Minimum Sealed Box Volume (cubic feet) | 0.5 | |
Maximum Sealed Box Volume (cubic feet) | 0.76 | |
Ideal Ported Box Volume (cubic feet) | 1.4 | |
Minimum Ported Box Volume (cubic feet) | 1.12 | |
Maximum Ported Box Volume (cubic feet) | 1.78 | |
Port diameter (inches) | 4 | |
Port length (inches) | 13 |
Product Research
Features
Enclosure Compatibility
Features
Overview: The Rockford Fosgate Prime R2D2-10 is a 10-inch subwoofer with dual 2Ω voice coils. The sub features a StampCast steel frame, quick-release compression terminals, and a mica injected polypropylene cone. An anodized aluminum voice coil former and spider venting help keep the subwoofer cool.
Steel Basket: The R2D2-10 subwoofer features a StampCast steel basket for added rigidity.
Compression Terminals: The Prime R2D2-10 features spring post terminals which accommodate speaker wire up to 12 gauge.
CEA-2031 Compliant: Power handling on the Rockford Fosgate Prime R2D2-10 subwoofer conforms to CEA-2031 industry standards. This means the subwoofer has the capacity to handle power under continuous demand, not instantaneous power handling, that over time, can damage voice coils.
Enclosure Compatibility
Sealed Box: Rockford recommends a sealed enclosure with an optimum internal volume of 0.59 cubic feet (from 0.5 to 0.75 cubic feet is acceptable). Sealed enclosures provide the most control over a woofer, will handle a lot of power, and provide accurate sonic reproduction, making them suitable to all types of music.
Ported Box: Rockford recommends a ported enclosure with an internal volume of 1.4 cubic feet using one 4" diameter x 13" long port; this yields a tuning frequency of 43 Hz. Ported (or vented) enclosures typically provide better overall efficiency than sealed so they are suitable for use with smaller amplifiers, giving you more bass output from less power. However, this efficiency comes at the expense of very low frequency output (below 40Hz).
The Rockford Fosgate R2D2-10 replaces these items:
- polypropylene cone with butyl rubber surround
- 50-150 watts RMS power range
- frequency response: 24-250 Hz
Loading...
Loading accessories...
Customer Q&A
12 questions already asked
Loading...
Loading articles...
These subs were exactly what i was looking for. They sound great and hit hard. They have enough power to shake my mirrors pretty good. I got 2 and put them in a down firing box under the backseat of my 06 f150 crew cab and they fit great.
ZachW from Ridgeland,MS