Chat
Contact us
Close contact box
Connect ID #
899 118 857 4
Connect ID #
899 118 857 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

Rockford Fosgate PEQ Remote control for 2007-up Power and Punch Series amplifiers

Item # 575ROCKPEQ

Rockford Fosgate amplifiers feature Punch EQ, a variable frequency boost that helps to overcome your car's natural...

Rockford Fosgate amplifiers feature Punch EQ, a variable frequency boost that helps to overcome your car's natural...

20 questions - 30 answers

Item # 575ROCKPEQ

In stock
$39.99

About the Rockford Fosgate PEQ

Buck Pomerantz
Rockford Fosgate amplifiers feature Punch EQ, a variable frequency boost that helps to overcome your car's natural acoustical shortcomings. This PEQ wired remote control plugs into all the latest model (2007) Punch and Power Series amplifiers, allowing you to adjust the boost from your dash so that your music can be heard clearly in your car's listening environment.

Rockford Fosgate amplifiers feature Punch EQ, a variable frequency boost that helps to overcome your car's natural acoustical shortcomings. This PEQ wired remote control plugs into all the latest model (2007) Punch and Power Series amplifiers, allowing you to adjust the boost from your dash so that your music can be heard clearly in your car's listening environment.

Mounting instructions and hardware are included, so you can install your remote within easy reach. Dial in the punch when you want it, and dial it out when you don't.

READ LESS

Product highlights:

  • remote Punch EQ for 2007-up Rockford Fosgate Punch and Power Series amplifiers
  • 16-1/2' remote cable and mounting hardware included
  • dimensions: 1-7/16"W x 1-1/4"H x 2"D
  • warranty: 1 year
  • MFR # PEQ

What's in the box:

  • Rockford Punch EQ remote module
  • 16.5' remote cable with RJ-45 connectors on each end
  • LED with attached 8" power/ground harness
  • Additional remote front panel
  • Mounting bracket
  • 2 Mounting screws
  • Flat washer
  • Nut
  • Punch EQ Remote Install instructions

Customer reviews for Rockford Fosgate PEQ

Loading reviews...

Average review:

4.5 out of 5 stars
56 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Crutchfield response
Customer provided image, click to load a larger version.
<< >>

More details on the Rockford Fosgate PEQ

Mark G.

Product Research

Features

Overview: The Rockford Fosgate Punch EQ wired remote is an equalizer for your amplifier's bass and treble that can be mounted anywhere in your vehicle. This remote control will automatically over-ride your amplifiers on-board EQ settings and deliver up to 3x the bass and/or treble with the turn of its rotary knob.

Compatibility: The Rockford Punch EQ is for use only with 2007-up Rockford Fosgate amplifiers (Power and Punch series) with the Remote Punch EQ port. .

On-Board Equalizer: The Punch EQ wired remote features an onboard equalizer with up to +18dB at 45Hz and/or up to +12db boost at 12kHz. The Punch EQ works along with the crossover switches on your compatible Rockford amplifier. When the crossover is set to low-pass, the Punch EQ acts as a variable bass boost; 0-18 dB at 45 Hz. When the crossover is set to high-pass, the Punch EQ acts as variable treble boost, 0-12 dB at 12 kHz. When the crossover is set to all-pass, both the bass and treble boost circuits are active.

Note: On the 4-channel amplifiers, the Punch EQ controls only the rear channels.

LED: The Punch EQ features an built-in LED that lights up when your Rockford amplifier is powered on. The unit also comes supplied with an external LED that can be mounted in a separate location up to 8" from the Punch EQ.

Connection: An RJ-45 jack is located on the rear of the Punch EQ. The Punch EQ comes supplied with a 16.5' remote cable that is ran through your vehicle and connected from the Punch EQ to the RJ-45 jack on your compatible Rockford amplifier. Once you install the remote Punch EQ, the rear Punch EQ control on your Rockford amplifier is disabled, and replaced completely by the remote.

Installation: The Punch EQ comes supplied with cables and mounting hardware for installation. The wired remote can be mounted in a variety of ways.

  • Outside the Panel Install: In this installation the Punch EQ is surface mounted with its housing intact by the supplied metal mounting bracket and two mounting screws.
  • Panel Install: In this installation the Punch EQ's housing is disassembled and the module is flush mounted in the dash. The remote module is installed from the backside of the panel. The unit's rotary knob extends out approximately 0.5" from the dash.
  • Panel Install-Separated LED Placement: In this installation the Punch EQ's housing is disassembled as well as the internal LED. The built-in LED is removed and replaced by the external LED and can be mounted approximately to 6" away from the Punch EQ. Both the wired remote module and wired external LED are installed from the backside of the panel and flush mounted in the dash. The unit's rotary knob extends out approximately 0.5" from the dash.

Loading accessories...

Customer Q&A

20 questions already asked

Q
Is this a 6 pin connector and knob controller it's what I'm looking for?.
daniel  Oct 05, 2023
1 answer
A
This knob is not universal and is only intended for use with specific Rockford Fosgate amplifiers. Although it may connect to whichever amplifier you're using, it may not be configure for use with an amplifier outside of the Rockford 2007+ Punch/Power series.
zachary  Oct 05, 2023 (Staff)
Q
Will it work with a PM300X1?
gene  Sep 01, 2023
1 answer
A
The PEQ would not be compatible. However, the PLC2 will do the job. Here's a link to that item: www.crutchfield.com/p_575PLC2/item.html
zachary  Sep 01, 2023 (Staff)
Q
Will this work on a power t2500bdcp??
rodolfo  Sep 09, 2022
1 answer
A
Yes, this will work with the T2500-1bdCP.
zachary  Sep 09, 2022 (Staff)
Q
How to install with an amp thatâ??s already plugged in? Is it a plug and play type? And should the volume knob be all the way down before plugging it in with the car off?
massimo  Dec 24, 2021
2 answers
A
Do you have a RF amp? If so there should be a plug in and to tune the amp turn it up so you know where clipping point is and not fry your subs or speakers.
robert  Dec 24, 2021
A
Yes it is plig and play. Yes the volume should be turned all of the way down with first installation and the car can be running or turned off...
johnta  Dec 24, 2021
Q
The rj45 cable is too long Iâ??m using it on a motorcycle application I. Would like to buy a 3 footer. Where and what cable can I buy?
emilio  Nov 23, 2021
1 answer
A
We do not offer a cable that will work in place of this one and Rockford Fosgate does not list a shorted one on their web site. We do offer RJ45 connectors and the tool to attach them that can be used that to shorten this cable: https://www.crutchfield.com/shopsearch/rj45.html?fa=1#&nvpair=FFCategory|[rank315350]In-wall%20Cables%20%26%20Distribution
jason  Nov 24, 2021 (Staff)
Q
Will it work with a t1 1500 amp fosgate ?
troy  Jan 13, 2021
1 answer
A
I use a Denon home theater receiver.
cedric  May 13, 2021
Q
Will this fit a rocksford fosgate punch p1s2-12 with a Pioneer GM-A3702 2-channel amp?
dylan  Apr 14, 2020
1 answer
A
assuming you have ONE sub - sub is 250 watts, 2 ohms. at 95 watts per channel amp is way too small to power that sub, and also is not stable to run bridged at 2 ohms. a 4 ohm version of this sub is made, but that amp is still too weak to power it. hope this helps.
robert  Apr 21, 2020
Q
Will this work with rockford fosgate prime 1200.1?
charles  Apr 19, 2019
2 answers
A
Not sure doesn't really matter this is not a level controller just a remote parametric EQ at 45hz 0-+18db.
kerry john  Apr 20, 2019
A
Dont think so. Only punch and power amplifiers
michael  Apr 19, 2019
Q
Is it 6 wire cable.????
trenton  Feb 02, 2019
2 answers
A
It's pretty close to that ... we only needed a couple of feet from the amp since we mounted amp under seat so I never really measured it... it's all tucked under the carpet to the console now... I'm pretty confident it's at least that long though... my son is at Texas Tech University 2 hours away so I don't have it to even try to measure it.
dominic  Feb 04, 2019
A
I am not sure.
carlton  Feb 04, 2019
Q
Will this work with 351s amp?
christopher  Oct 22, 2017
1 answer
A
The 351S amp was from 2003 and the PEQ is made for use with compatible 2007 & up model amplifiers.
ryan  Oct 25, 2017 (Staff)
Q
How long is the cable? I need at least a 8 foot cable to fit my truck
tyler  Oct 22, 2016
2 answers
A
16ft
claudia  Oct 28, 2016
A
The cable you're referring to is 16 feet. plenty of cable left over
markus  Oct 22, 2016
Q
Will this work with the P300-10 powered subwoofer?
rebecca  Mar 04, 2016
3 answers
A
The p300-10 comes with a remote bass knob but you don't have to use it unless you want adjustability from the drivers seat.
jim  Mar 04, 2016
A
edit.. *** I can't see why it wouldn't work...
gary  Mar 04, 2016
A
A remote bass knob should have been included with the sub, I know this works with the newer amps, incanted er why it wouldn't work with this set up as well. It wouldnt be cost efficient for Rockford to make a different knob.
gary  Mar 04, 2016
Q
will this work with other brand amps?
stephanie  Jun 16, 2015
3 answers
A
Rock for Fosgate's power amps also Rockford Fosgate power series.
markus  Oct 22, 2016
A
Yes it will as long as the amp has the same size connection as this remote
josh  Jun 21, 2015
A
I'm not sure. We have a Rockford Foster amp.
regina  Jun 17, 2015
Q
Ok, I am going to run 2 subs with 2 identical amps. I would like to run just one Rockford Fosgate PEQ Amp Remote Control up front to run both amps/subs. Is there a splitter/collector that I can run both amp remote wires into and then just run one wire/remote control to the front?
francis  Apr 20, 2015
3 answers
A
this specific set up is not set up that way
markus  Oct 22, 2016
A
I am not sure, I would call Rockford and ask a tech
conrad l  Apr 21, 2015
A
No, best bet would be run 1 of them 50% gain and remote control the other
justin  Apr 21, 2015
SHOW MORESHOW LESS

Loading articles...

Compare the sound