Features

CineGrey 5D: The CineGrey 5D is an angular reflective front projection material designed to reject ambient light while maintaining superb picture quality.  The CineGrey 5D is the perfect solution for rooms that have little or no control over incidental light.  This means that it's an ideal fit for family rooms as well as lecture halls, boardrooms, sports bars, training facilities, and other business environments. In addition, the CineGrey 5D increases projector brightness 1.5x the amount (perfect for low lumens ouput projectors). The CineGrey 5D is superior to traditional white or gray materials in its ability to maintain a sharp, bright image regardless  of ambient light.  The angular reflective material incorporates a diffusion layer over a highl reflective surface. This causes direct light from the projector to reflect squarely into the viewer's field of vision while the outer contrast layer enhances image quality while reflecting indirect ambient light.

• 4K Ultra HD, HDR, and Active 3D Ready
• High fidelity gray surface produces superb clarity and sharp images
• ISF Certified for accurate color points, color temperature and dynamic range
• Angular-Reflective and Ambient Light Rejecting technology
• 1.5 Gain, 80-degree View Angle, 88% Ploarization Retention, 1.5 Minium Lens Throw
• Mildew resistant and screen surface can be cleaned with a microfiber cloth
• Flame retardant and complies with NFPA 701 Standards

Projector Placement: Since angular reflective means that your projected image will reflect at the mirror-opposite angle, it is important to position the projector so that the viewer will benefit by getting the best possible image performance from the projection screen. In order to optimize your viewing experience, following the pojector placement guidelines in the User's Guide.

• Angular Reflective material is not compatible with ultra/short-throw projectors
• Ambient light must not come from the same direction as the projector
• Minimum lens throw ratio 1.5x image width

Cleaning: Dust, dirt and scratches on the projection screen surface will affect the quality and performance of the projection image. The mildew resistant, screen surface can be cleaned with a micro-fiber cloth and water. For optimal results, pay attention to the following instructions.

• The screen surface has a horizontal structure. Do not wipe the screen up and down or in a circular motion. Wipe from left to right only.
• Please clean the dust on the screen surface with a soft brush or microfiber cloth (rough towel or cloth may damage the screen's surface).
• Gently wipe the screen with a moistened microfiber cloth with mild soap diluted in water.