About the Definitive Technology BP7006
Enjoy more lifelike sound with your favorite movies, music, and video games
Enjoy more lifelike sound with your favorite movies, music, and video games
The Bipolar SuperTower series combines bipolar speaker design with Definitive's SuperCube® subwoofer technology to give you spacious, lifelike sound and rumbling bass. The BP7006s are among the lowest-priced full-range bipolar speakers available, using both front- and rear-firing driver arrays to radiate sound in all directions. Even in large rooms, every listener will experience a huge, three-dimensional soundstage with both music and movies.
Innovative bipolar design produces an exceptionally wide, deep soundstage
Each driver array in the BP7006 consists of one 4-1/2" midrange paired with a 1" dome tweeter. This bipolar design means that direct sound from the front drivers arrives at your ears first, to provide clear, focused imaging. That's followed by sound from the rear drivers, which is slightly delayed, to enhance spaciousness. The combination creates a lush, seamless soundstage that's more like the way we hear sounds in real life.
Powerful bass built right into each cabinet
At the base of each speaker is an 8" side-firing subwoofer coupled to two bass radiators. This trio creates a total surface area that nearly matches that of a traditional 15" woofer, but has better bass control, speed, and detail than a single huge woofer could achieve. A built-in 300-watt amplifier powers the subwoofer, delivering deep, hard-hitting bass that eliminates the need for an external sub. And because a subwoofer is built into each cabinet, bass output is already perfectly blended with the mids and the highs. So with a pair of BP7006s, you get two subs in your setup instead of just one.
Room-friendly sound allows flexible placement
The BP7006's slim cabinet takes up less than a square foot of floor space, yet its bipolar design produces twice as much sound in your room as a conventional speaker. A sophisticated crossover equalizes the front and rear drivers separately for more precise control of their combined output. The bipolar driver arrays are wired together internally, so you connect the BP7006s to your receiver as you would conventional speakers, using one set of wires per speaker. For best results, position the BP7006s from 4" to 24" out from your wall.
Build a complete home theater system using perfectly matched Definitive Technology centers and surrounds. The BP 7006s pair well with Definitive's C/L/R2300 or C/L/R2002 center channel speakers, and with their BP1.2X bipolar surround speakers.
- bipolar speaker technology
- frequency response 17-30,000 Hz
- sensitivity 92 dB
- 8-ohm impedance
- handles up to 250 watts
- video-shielded for safe placement next to any TV
- front array: two 4-1/2" woofers and 1" pure aluminum dome tweeter
- rear array: two 4-1/2" woofers and 1" pure aluminum dome tweeter
- one 8" long-throw subwoofer coupled to two 8" low bass radiators
- built-in 300-watt subwoofer amplifier with adjustable volume control
- subwoofer auto on/off
- one pair of 5-way binding posts
- line-level LFE input (optional connection for use with receivers with LFE output)
- 6-foot AC power cord
- piano-gloss black finish
- 6-1/4"W x 38-9/16"H x 12-9/16"D
- warranty: 5 years for speakers, 3 years for amplifier
- MFR # BP7006
What's in the box:
- 2 Tower speakers with built-in powered subwoofer
- 4 Rear stabilizer-feet
- 8 Adjustable plastic feet
- 8 Spiked-feet (hex-nuts installed)
- 8 Wood-screws
- Owner's Manual
- Online Product Registration card
Customer reviews for Definitive Technology BP7006
Average review:3.0 out of 5 stars
Thanks for submitting your review
More details on the Definitive Technology BP7006
Features & specs
|Tweeter Size (inches)||1|
|Midrange Size (inches)||4.5|
|Woofer Size (inches)||8|
|Built-in Powered Sub||---|
|Dolby Atmos Drivers|
|Connector Type||5-way post/RCA|
|Parts Warranty||5 Yrs speaker, 3 Yrs amp|
|Labor Warranty||5 Yrs speaker, 3 Yrs amp|
|Frequency Response||17-30k Hz|
|Subwoofer Amp Power||300|
Overview: The Definitive Technology BP7006 SuperTower is a bipolar tower loudspeaker with a built-in powered subwoofer intended for musical reproduction and home theater systems. This full-range bipolar (front and rear) radiating tower loudspeaker combines spacious soundstaging, lifelike depth-of-field, accurate resolution, and pinpoint imaging with extended bass response, high-efficiency, wide-dynamic range, and easy-to-position convenience. The BP7006 features front and rear mounted driver arrays, each consisting of one high-definition cast-basket 4-1/2" bass/midrange driver and a 1" annealed Pure Aluminum dome tweeter. The BP7006 also combines a built-in 8-inch subwoofer driven by a 300-Watt class D amplifier and two pressure-coupled 8-inch low bass radiators for 150 square inches of bass radiating area. That is nearly as much surface area as a single 15-inch woofer; but with better control, speed and detail. Built-in powered subwoofers achieve dramatically better blending, integration and timbre accuracy than could ever be achieved with separate subs. A Linkwitz-Riley crossover network seamlessly blends all the speaker's drivers together. The bipolar tower speaker's slim designer enclosure takes up less than a half square foot of floor space.
Bipolar Design: The Definitive Technology BP7006 is a true bipolar speaker, containing two complete full-range speaker systems; one on each side of the cabinet. Definitive's Bipolar technology radiates sound from the front and the back of the speaker for more life-like sound and spacious imaging for every listener in the room. Bipolar technology combines the performance advantages of direct radiating (imaging, focus, localization, and specificity) and dipolar speakers (spacious, all-enveloping ambience) into one ideal speaker which is perfect for all multi-channel formats. The BP7006's wide dynamic range, as well as true high-definition sound quality, combined with its bipolar radiation pattern results in total immersion in the sound field.
Moving Coil Pure Aluminum Dome Tweeters: Each Definitive Technology BP7006 utilizes two annealed pure aluminum 1-inch dome tweeters (one on front-side/one on back-side), suspended by a silk surround and acoustically loaded by a precisely configured phase plug/lens; engineered to assure perfectly controlled, absolutely linear movement. This results in smooth extended response (up to 30 kHz), greatly reduced distortion, improved transient response, wider dispersion, and notably higher definition. Magnetic fluid damping is incorporated for ultra high power handling.
High-Definition Die-Cast Basket Drivers: Each Definitive Technology BP7006 utilizes two 4-1/2 inch high-definition bass/midrange drivers (one on front-side/one on back-side) for significant performance advantages in the areas of bass reproduction, lifelike midrange clarity, and dynamic range. These sophisticated bass/midrange drivers incorporate deeply drawn mineral-filled polymer cones, combined with butyl rubber surrounds and dustcaps, high temperature vented voice coils, and massive magnet structures. This combination of features assures high definition, superb transient response, high efficiency, high power handling, and extended bass response. In addition, they are assembled utilizing an aerodynamically designed, magnetically inert, cast-magnesium basket to minimize internal reflections off the back of the cone and preserve structural and magnetic integrity under all conditions.
Phase-Coherent Crossovers: Definitive Technology's complex and sophisticated Linkwitz-Riley crossover networks are differential crossovers which equalize the front and rear drivers of the speaker separately for both linear frequency and phase response of their summed output. Also included are advanced technology Zobel Networks which provide a more stable load for your amplifier. This makes the speaker easier to drive, which results in smooth, more natural sound. In addition, the electronic crossovers in the subwoofer modules work together with the Linkwitz-Riley networks to perfectly blend the subwoofers with the bipolar arrays. The result is sonic perfection that completely preserves the phase coherence, transient response and dynamic integrity of the original signal.
Break-In Period: The BP7006 will sound good right out of the box; however, an extended break-in period of 40-60 hours or more of playing is required to reach full performance capability. The break-in period allows the suspensions to work in and results in full bass, a more open midrange, and smoother high frequency reproduction.
Powered Subwoofer: Besides eliminating the need for additional floor-space and a separate subwoofer, integrated subs offer dramatic performance benefits, such as being perfectly blended with the midrange and high frequency section of the speaker. Plus, you have two subwoofers to help minimize the detrimental effects of room conditions, so you typically get a smoother response than you would get with a single separate sub. Each BP7006 features a single 8-inch long-throw subwoofer that is powered by a built-in 300-watt Class D amplifier and pressure-coupled to two 8-inch low-bass radiators on the opposite-side of the cabinet for a total bass radiating area that is almost greater than a 15-inch woofer; but with far greater control, definition, and speed. A pair Definitive Technology BP7006 is like having two 15", 300-watt powered subwoofers in your room without taking up anymore floor space. The result is bass that is deep, powerful and impactful while at the same time having tight, controlled, and accurate response. The built-in powered subwoofer also provides the following features.
- Auto Turn-On: The BP7006's built-in active power subwoofer section must be plugged into an electrical socket using the attached AC cord. The BP7006 has a special circuit which automatically turns the powered subwoofer section on when a signal is fed to the loudspeaker and turns off when there is a no signal (for 1-hour).
- LED: An LED on the back-panel will light up when a signal is sensed and the amplifier turns on. The LED will automatically turn-off when there is no signal (for 1-hour).
- Built-In Crossover: Definitive's engineers have
perfectly adjusted the crossover and phase between the subwoofer and main
speaker sections of the BP7006 to achieve seamless blending and life-like
- Note: Please not that there are no controls to vary the crossover points or phase because these have been factory calibrated and set to provide perfect blending.
- Level Control: The BP7006 has a bass-level control which allows you to tune the output level of the built-in powered subwoofer section to match your room and personal listening preferences.
- Protection Circuit: To prevent accidental damage to the subwoofer built-in the BP7006 from overdriving the system, the built-in powered subwoofer section features an internal overload protection circuit, which will turn the powered subwoofer off or down when overdriven or overheated and will then resume normal operation after a few minutes.
Narrow Non-Resonant, Low-Diffraction Cabinet: The tri-chambered monocoque cabinet of the Definitive Technology BP7006 is constructed of extremely thick, dense medite with foam damping pads and extensive internal bracing. This virtually eliminates cabinet vibrations and resonance which would otherwise interfere with the pure sound produced by Definitive's high-definition drivers. The driver placement of the BP7006 reduces diffraction to an absolute minimum by flush mounting drivers on extremely narrow baffles with radial edges covered by a frameless grille "sock." The narrow cabinet also dramatically improves three-dimensional imaging.
Speaker-Level & Line-Level Connections: Each Definitive Technology BP7006 is equipped with a pair of gold-plated, 5-way binding posts to attach your receiver's speaker wire and a gold-plated, mono-RCA/LFE input to connect your receiver's LFE/subwoofer output.
Applications: The precise accuracy, wide-range response, and high impact dynamic range of the Definitive Technology BP7006 allow you to use the speaker in most home audio/video system's ranging from a 2-channel music-only to a 7.1 channel home theater system. When used as a stereo pair, simply connect it with speaker wire as one would any pair of speakers; there is no benefit to using the low-level LFE inputs. When using the BP7006 in a multi-channel system there are two options.
- Speaker Wire Only: Connect speaker wire as in a stereo system; set bass management as Front=Large, Subwoofer=None
- Speaker Wire + Subwoofer Cable: In addition to speaker wires connect low-level cables from the LFE/Subwoofer output of the receiver/processor to the LFE inputs of the STS (Y connector is usually required). Set bass management as Front=Large, Subwoofer=Yes. The benefit of this hook up method is that one now has the ability to control the level of the LFE channel relative to Front L&R bass.
Placement: The Definitive Technology Bipolar SuperTower speakers are easy to hook up to your system, simple to place, and flexible in terms of room positioning. They are engineered to be located as close as 5" or as far as 36" from the wall. The mirror-imaged side-mounted subwoofers can face either toward or away from each other for even greater flexibility and room tuning ability. In addition, a major benefit of the special driver topology is wide-dispersion, which assures a superb panorama of lifelike sound for every listener in the room wherever you put them.
Adjustable Feet: Each Definitive Technology BP7006 comes with four plastic-tipped feet for placing the tower speaker safely on your hardwood floors or tile, and four spiked-feet for placing the tower speaker securely on your carpet. The adjustable feet help you level the speaker on uneven flooring. In addition, each BP7006 comes with a pair of rear-stabilizer feet to help stabilize the speaker even further.