About the Vail Amp and Outdoor Speaker Package
In-wall Echo Dot amplifier and outdoor speakers
In-wall Echo Dot amplifier and outdoor speakers
The innovative Vail Amp from Vanguard Dynamics lets you turn a wired multi-room audio system into a modern "smart" system with convenient voice control, using your Amazon Echo Dot (not included) as the music source. Its 30-watt x 2 amplifier powers the included pair of Polk Audio Atrium4 speakers, for way better sound than the Dot's internal speaker can produce.
Multi-room audio and voice control
You can use multiple Vail Amps (and Echo Dots) to create a whole-home system with voice control. You can tell Alexa to play different music in each room, streaming Alexa-friendly services like Spotify and Amazon Music Unlimited via Wi-Fi®. With an Echo Dot in each room, you get manual push-button control and voice control over the system, without having to run a lot of wire or infrared repeaters. You can even go a little bit old-school and use it as an intercom system.
The Vail Amp mounts your Dot in an attractive in-wall dock, where it doubles as a "local" in-wall volume control for that room. You can make the installation match your decor with the included paintable trim plate. An included wall plate module contains input connections for a local source like a TV, and an output for adding a powered subwoofer.
- 2 x 30 watt stereo amplifier drives up to two pairs of speakers
- powers Amazon Echo Dot and included Polk Audio Atrium4 speakers
- 4- or 8-ohm output
- attractive single-gang wall plate with input, output, and power connections
- CAT-5 cable and 16-gauge power cable included to connect wall plate module and amplifier
- paintable snap-on trim cover for mounting Echo Dot
- 3.5mm audio input for Amazon Echo Dot
- RJ-45 connector for wall plate module
- left and right speaker output terminals
Polk Audio Atrium4 Speakers:
- 4-1/2" woofer, 3/4" aluminum dome tweeter
- impedance: 8 ohms
- 5-13/16"W x 8-5/8"H x 6-13/16"D
- includes mounting hardware
- lifetime warranty
Wall Plate Connections:
- stereo analog RCA input
- mono RCA analog subwoofer output
Amplifier Kit Dimensions and Warranty:
- amplifier: 5-1/8" diameter x 2-5/8" depth
- amplifier cutout: 4-1/2"
- Echo Dot trim plate: 5-1/4" x 5-1/4"
- input/output wall plate: 2-13/16"W x 4-9/16"H x 2-1/16"D
- warranty: 5 years
What's in the box:
- The Vail Amp and Outdoor Speaker Package consists of the Vanguard Dynamics Vail amplifier and a pair of Polk Audio Atrium4 Outdoor speakers (all individually packaged).
- The Vail Amp box includes:
- In-wall amplifier (for the Echo Dot 2nd gen)
- Wall-plate jack
- AC power adapter (attached 39" DC cord)
- 6.5" Power harness
- 6.5' Cat5 cable
- Owner's Manual
- Cut-Out Template
- The Polk Audio Atrium4 outdoor speaker box includes:
- 2 White all-weather speakers
- 2 Mounting brackets (installed) Owner's Manual
- Online Product Registration card
- Polk Audio brochure
Customer reviews for Vail Amp and Outdoor Speaker Package
Thanks for submitting your review
More details on the Vail Amp and Outdoor Speaker Package
Vail Amp: The Vail Amp turns the Amazon Echo Dot (2nd generation) into an in-wall high-performance audio source. The small fully contained amplified assembly firmly holds the Echo Dot (2nd gen) in an attractive wall dock that allows for accurate voice intelligibility and convenient light switch level access to the Dot's surface controls. Its high-power amplifier can be connected to up to two pairs of any in-ceiling, in-wall, or cabinet speakers. The Vail Amp becomes your in-wall volume control keypad, voice control, and streaming music source.
High-Performance Digital Amplifier: The Vail Amp is equipped with a 30 watt x 2 channel Class D amplifier capable of powering two pair of 8-ohm loudspeakers or one pair of 4-ohm loudspeakers. There is a switch on the front of the Vail Amp that can be set to 8- or 4-ohm. The Vail Amp utilizes four screw-down terminals that will accept 16- or 18-AWG bare wire (will not accept pin-connectors, spade-lugs, or banana plugs).
Analog Inputs & Sub Out: The Vail Amp features a male stereo minijack (3.5mm) connector which plugs into your Echo Dot (2nd generation). The included Wall Plate has an stereo RCA input and mono-RCA subwoofer output. The stereo RCA input allows you to connect a secondary audio source to the Vail Amp (your second audio source must have a variable audio output; the Vail Amp was not intended for audio sources with fixed audio outputs). The subwoofer output provides a convenient location to connect any powered subwoofer for added bass.
Note: A 6.5' CAT-5 cable is provided that plugs in between the Vail Amp and the Wall Plate in order to transmit the audio from the analog inputs and sub output between the two in-wall components.
In-Wall Installation: Both the the Vail Amp and included Wall Plate will require you to cutout a hole in your wall (mounting templates are provided). The Vail Amp requires a circular cutout with a diameter of 4.5" and mounting depth of 3.25". The Wall Plate will require a rectangular cutout measuring 1.25" (w) x 2.8125" (h) x 2.25" (d), and mounts to a single-gain box (sold separately). The outer dimensions of the Vail Amp with its paintable trim cover installed measures 5.3125" (w) x 5.3125" (h) x 0.25" (d). The outer dimensions of the Wall Plate measures 2.8125" (w) x 4.5625" (h) x 0.6875" (w).
Note: When mounting the Vail Amp and Wall Plate, keep in mind the length of the included cables. The power/ground cable and CAT-5 cable that run through the wall can be extended up to 300' to mount the Vail Amp and Wall Plate further apart. The 24V power supply has a fixed 39" DC cord, so you'll need to make sure the Wall Plate is mounted near an electrical outlet.
24V Power Supply: The Vail Amp comes with a 24V power supply. The power supply plugs into an AC wall outlet or surge protector (sold separately) and features an attached 39" DC cord that will plug into the "Power" port on front of the Wall Plate. The included 6.5' power/ground harness runs through the wall and plugs in between the Vail Amp and Wall Plate to supply power to the high-performance digital amplifier and your connected Echo Dot (2nd gen). The Vail Amp features a male microUSB connector that plugs into your Echo Dot (2nd gen) for power.
Weatherproof Design: Polk Audio All-Weather Certified, Atrium Series speakers exceed baseline industrial and military specifications for environmental endurance (ASTM D5894-UV Salt Fog, Mil Standard 810 Immersion, Mil-Std 883 Method 1009.8 for salt and corrosion.) Certification means Atrium speakers can effortlessly withstand the outdoors, and hold up in extreme temperatures and precipitation.
Polk Patented Technologies: Patented Dynamic Balance and Klippel Optimization technologies ensure the perfect material performance, eliminating driver and tweeter "artifacts" for more realistic sound reproduction at high and low volume levels.
- Dynamic Balance: A Polk perfected method of analyzing a speaker's microscopic behavior with laser Interferometry. Polk engineers can tune out unwanted resonance and distortion with the right combination of materials, geometry and construction techniques. This brings you pure, distortion-free sound.
- Klippel Optimization: By using a state-of-the-art Klippel Distortion Analyzer, Polk engineers were able to optimize the woofer's motor structure, voice coil alignment and suspension bringing you the best possible performance even at extreme listening levels.
Woofers: Each speaker features a 4 1/2" (11.43cm) long-throw mineral-filled polypropylene cone driver for clean midrange and deep, accurate bass. For a smoother response and improved durability, each woofer uses a butyl rubber surround.
Tweeters: Each speaker features a 3/4" (19mm) anodized aluminum dome tweeter with rubber surround and neodymium magnet for better power handling and smoother response.
Rugged Enclosure Design: The durable, mineral-filled polypropylene cabinet design, with molded-in bracing, sounds like a real speaker (not "an outdoor speaker"), and survives years of seasonal changes, for great sound, no matter what the weather. The rugged, mineral-filled polypropylene enclosure features a rustproof aluminum grille, rustproof aluminum bracket, and stainless steel/brass hardware.
Note: The speakers are available in a black or white finish. The enclosure is also paintable.
Broad Coverage Baffle Design: The sculpted front, steeply-angled baffle design and rounded enclosure minimize diffraction (sound reflecting off of hard edges) for more open and lifelike imaging.
5-way Binding Posts: The Atrium 4 has a pair of gold-plated 5-way binding posts that will accept bare wire, pin connectors, spade connectors, single- and dual-banana plugs.
Speed-Locking Mounting System: The included rustproof aluminum brackets allow multiple mounting options and are quick-and-easy to install. The Atrium 4 can be mounted either horizontally or vertically and aimed to deliver the best possible sound in a variety of situations The integrated brackets provide full 180-degree rotation (when mounted vertically or horizontally. The mounting brackets even allow the speaker to be mounted snugly in a corner or under an eve (at a downward 45-degree angle). You can remove the bracket and use the speaker's built-in stability feet, if you simply want to place the speaker on a table or shelf.
2 questions already asked