About the Nuvo NV-2IC6-DVC Series Two
Stereo sound from a single in-ceiling speaker
Stereo sound from a single in-ceiling speaker
Got a small room that you're itching to have some tunes in? Nuvo's NV-2IC6-DVC offers dual inputs for connecting to your amplifier's left and right channels. That means you can hear both halves of the stereo mix in smaller spaces where a traditional pair of speakers wouldn't work. Twin silk dome tweeters add tasty smoothness to the treble. The tweeters pivot so you can better aim the highs where you need them. A single 6-1/2" polypropylene woofer brings some low-end impact to your favorite songs.
DIY installation
If this is a do-it-yourself install, check out our guide to installing in-ceiling speakers, along with our selection of in-wall speaker wire. During installation, the tweeter bridge can be used as a handle to make the speaker easier to manage. The included rimless magnetic grille is paintable and fits flush with your ceiling.
Product highlights:
- 6-1/2" dual-voice coil polypropylene woofer
- two 1/2" pivoting silk dome tweeters
- tweeter is aimable to better direct high frequencies to your listening position
- tweeter bridge serves as a handle for holding speaker during installation
- frequency response: 55-20,000 Hz
- handles up to 50 watts RMS
- sensitivity: 86 dB
- impedance: 8 ohms
- rimless, paintable magnetic grille for seamless look
- cutout required: 8-1/16"
- overall diameter: 9-3/16"
- mounting depth: 3-15/16
- weight: 4.35 lbs.
- warranty: lifetime
- Our 60-day money-back guarantee
- MFR # NV-2IC6-DVC
What's in the box:
Nuvo NV-2IC6-DVC Series Two owner's manual
- In-wall loudspeaker
- Grille
- Instruction Sheet
- Cutout Template
Reviews
Customer reviews
Loading reviews...
Nuvo NV-2IC6-DVC Series Two reviews
Average review:
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Nuvo NV-2IC6-DVC Series Two
Features & specs
| Features | ||
|---|---|---|
| Quantity in Package | Single | |
| Tweeter | Soft-Dome | |
| Aimable Tweeter | No | |
| Woofer Composition | Poly | |
| Woofer Surround | Rubber | |
| Connector Type | Spring clip | |
| Bi-Amp Inputs | No | |
| Built-in Back-box | No | |
| Moisture Resistance | ||
| Indoor (Moisture-resistant) | No | |
| Outdoor (Partial Exposure) | No | |
| Outdoor (Full Exposure) | No | |
| Specs | ||
| Tweeter Size | 0.5 | |
| Midrange Size | N/A | |
| Speaker Shape | Round | |
| Woofer Size | 6.5 | |
| Cutout Width | 8.0625 | |
| Cutout Height | 8.0625 | |
| Mounting Depth | 3.9375 | |
| Power Range (Watts) | up to 50 | |
| Sensitivity | 86 dB | |
| Impedance (Ohms) | 8 | |
| Frequency Response | 55-20kHz | |
| Parts Warranty | Lifetime | |
| Labor Warranty | Lifetime | |
Product Research
Features
Stereo Driver Design: The Legrand Nuvo Series Two NV-2IC6-DVC in-ceiling loudspeaker utilizes a stereo driver design, featuring two 0.5" silk soft-dome tweeters and one 6.5" DVC (dual voice coil) poly cone woofer that fills your listening space with stereo sound. The NV-2IC6-DVC is specifically designed for smaller rooms, or rooms where a pair of speakers typically would not work.
Stereo Inputs: The Nuvo NV-2IC6-DVC in-ceiling loudspeaker is outfitted with two sets of spring-clip terminals to connect to the left and right amplifier channels of your stereo receiver or integrated amplifier. The spring-clip terminals will accept bare speaker wire (up to 12AWG) or pin-connectors.
Magnetic Grille: The Nuvo NV-2IC6-DVC comes with a low-profile, rimless grille that attaches magnetically to the front-baffle of the in-ceiling speaker. The grille features a white finish, but can be painted to match your ceiling. The low-profile, magnetic grille only protrudes 0.1875" from the ceiling.
Mounting Options: The Series Two NV-2IC6-DVC requires a circular cutout in the ceiling that measures 8.0625" (diameter) x 3.9375" (depth). Three swivel "dog-leg" clamps with integrated mounting screws secure the speaker in the ceiling. There needs to be at least 0.75" of clearance around the inside of the cutout to accommodate the swivel "dog-leg" clamps. The "dog-leg" clamps will accommodate up to 1.5" drywall thickness.
Loading accessories...
Customer Q&A
1 question already asked
Loading articles...
These sound really nice. We were looking for something for the wall, not the ceiling and it worked fine. Good amount of bass.
Mary from Valencia, PA