About the Nuvo NV-SUBRX
Send audio signals wirelessly to more subwoofers
Send audio signals wirelessly to more subwoofers
Nuvo's NV-SUBTXRX transmitter/receiver kit is a convenient way to connect a single subwoofer to your system without an audio cable. But, what if you've got more than one sub? That's where this add-on receiver comes in handy. It pairs with the SUBTXRX's transmitter module to send the same audio signal to a second sub. And if you have more than two subwoofers, you're still covered. In fact, you can pair a total of four receivers to a single transmitter at once, meaning you can have four powered subwoofers in your listening room. (Just remember, they'll still each need AC power.)
Product highlights:
- add-on wireless receiver for Nuvo's NV-SUBTXRX
- compatible with any brand of subwoofer with mono or stereo RCA connections
- automatically changes wireless frequency if interference is detected to prevent signal degradation and delays
- wireless range: up to 50 feet
- dimensions (measured by Crutchfield): 2-5/16"W x 1-5/16"H x 4-9/16"D
- warranty: 2 years
- MFR # NV-SUBRX-NA
What's in the box:
- Wireless receiver
- AC power adapter (attached 5' cord)
- 8" miniUSB-to-USB cable
- Installation Instructions
Customer reviews for Nuvo NV-SUBRX
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Nuvo NV-SUBRX
Product Research
Features
Add-On Wireless Receiver: Connect an additional NV-SUBRX wireless subwoofer receiver to Nuvo's NV-SUBTXRX wireless subwoofer kit (sold separately) to expand its capability. Up to three NV-SUBRX wireless subwoofer receivers can be added to Nuvo's NV-SUBTXRX wireless subwoofer kit for a connection of up to 4 powered subwoofer.
Note: The NV-SUBRX wireless subwoofer receiver is not a stand-alone device and requires the Nuvo NV-SUBTXRX wireless subwoofer kit.
5GHz Wireless Transmission: The Nuvo wireless subwoofer system utilizes 5GHz with auto frequency hopping and a latency of less than 20 milliseconds. It has a wireless range of approximately 50' between the transmitter and receiver. With a wireless range of up to 50', the NV-SUBTXRX offers simple setup, placement flexibility, and reliable connectivity.
- Operating Frequency: 5.2GHz and 5.8GHz
- Channel Width: < 22MHz
- Latency: < 20 milliseconds
- Wireless Range: 50'
Note: There is a "Pairing" button on back of both the transmitter and receiver that will need to be pressed to make wireless connection.
LFE Output: The NV-SUBRX wireless receiver plugs into your powered subwoofer's RCA or LFE input. The receiver features a mono-RCA output jack.
Note: Subwoofer cable is not included and sold separately (see Accessories Tab). A RCA Y-adapter (sold separately) may also be required for connection.
Mounting Options: The wireless receiver can simply be tabletop mounted, or wall-mounted using the integrated keyhole slots (mounting screws not included).
Power Requirements: The wireless receiver comes with an AC power adapter that will need to be plugged into an AC power outlet. The receiver can also be powered via USB, if your powered subwoofer has a USB port (5V/500ma).
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
These work great! Look at the -SUBTXRX for more info.
Dave from Powell, TN