Contact us
Close contact box
Connect ID #
499 168 438 4
Connect ID #
499 168 438 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

NAD M32 Masters Series Stereo integrated amplifier with built-in DAC

Item # 745M32

Back in 2010, NAD turned the high-end audio world on its ear with their revolutionary M2 DirectDigital™...

Back in 2010, NAD turned the high-end audio world on its ear with their revolutionary M2 DirectDigital™...

California customers:
Please click here for your Proposition 65 warning.

1 question - 2 answers

Item # 745M32

About the NAD M32 Masters Series

Steve Kindig

NAD continues to re-write the book on amplifier design

Back in 2010, NAD turned the high-end audio world on its ear with their revolutionary M2 DirectDigital™ integrated amplifier. It combined the strengths of a Class D amplifier section — high efficiency and high power — with pristine sound that could compete with cost-no-object designs. Think of NAD's M32 as a "son of M2," offering a bit less brute power, but a lot more versatility and future-readiness.

NAD continues to re-write the book on amplifier design

Back in 2010, NAD turned the high-end audio world on its ear with their revolutionary M2 DirectDigital™ integrated amplifier. It combined the strengths of a Class D amplifier section — high efficiency and high power — with pristine sound that could compete with cost-no-object designs. Think of NAD's M32 as a "son of M2," offering a bit less brute power, but a lot more versatility and future-readiness.

This flexible multi-tool of a component gives digital audio sources top priority, and the list of inputs includes optical, coaxial, balanced AES/EBU, and asynchronous USB. You also get three analog inputs, including an excellent phono input for connecting your turntable. The power amp section is conservatively rated at 180 watts per channel into 8 or 4 ohms, which means the M32 will drive virtually any pair of speakers. And a discrete headphone amp will make your headphones sing. 

The shortest signal path between source and speaker, for reduced noise

NAD M32 back panel

The M32's digital and analog inputs can handle your best audio sources, including high-res digital downloads and vinyl.

NAD's DirectDigital amplification combines all pre-amplification and power amplification functions into a single amplifying stage. That makes the path between source and speaker much shorter and simpler.

Because the M32 handles digital audio signals directly, you won't hear the noise and distortion that's added by the analog amplifying stages found in conventional amplifiers and preamps.

Without all that noise to compete with, the subtle details you never noticed will emerge, even from tracks you've heard a hundred times. You'll get a clearer sense of the dimensions of the performance space, and be able to better appreciate the rich tonal texture of each instrument.

Unique feedback circuit cancels out amplifier distortion

Lots of people assume that all Class D amps are digital amps — that the "D" stands for digital — but that's not the case. Most Class D amps are actually analog, but the M32 is truly digital, not just Class D. Another unusual feature of the M32 is the way it uses feedback to minimize distortion in the output stage.

Here's how it works: The output signal is continuously compared to the input signal, and a mirror image of the difference (distortion) is introduced in order to cancel it out. This all happens while the signal is still in the digital domain, before it's converted to analog at the speaker outputs.

Modular design gives your system room to grow

The M32's back panel features four MDC (Modular Design Construction) slots. One has a digital audio input board pre-installed, while the remaining three are available for customization and expandability. One compelling option is NAD's BluOS™ module, which is a cool way to explore the BluOS multi-room audio ecosystem. BluOS is an advanced music management system with support for local NAS drives and streaming audio services like Spotify®, Tidal®, and many others.

Once you install the optional BluOS module, you can centralize your digital music libraries and streaming services. The free app lets you easily control playback with any smartphone or tablet.


Product highlights:

    • 180 watts x 2 channels into 8 or 4 ohms (20-20,000 Hz) at 0.03% THD
    • 4-ohm stable for use with a wide range of speakers
    • DirectDigital™ amplifier design for greater efficiency and reduced distortion
    • 4 MDC (Modular Design Construction) slots for adding additional capabilities and features (one slot has the pre-installed digital input board)
    • built-in subwoofer crossover with selectable frequency
    • independent built-in high-output headphone amplifier
    • remote control
    • 3 stereo RCA audio inputs, including a phono input (for use with a moving magnet cartridge)
    • stereo RCA preamp output for connecting a separate amplifier or powered subwoofer
    • digital inputs: 2 Toslink optical, 2 coaxial, 1 balanced AES/EBU (all provide up to 24-bit/192kHz resolution)
    • digital outputs: 1 Toslink optical, 1 coaxial
    • asynchronous USB (Type B) input for playback of high-resolution digital music files from a connected computer (up to 24-bit/192kHz resolution)
    • USB (Type A) port for service only
    • 2 pairs of binding post speaker connectors for bi-wiring
    • IR input and 12-volt trigger in/out
    • RS-232C port for use with external controllers
    • full-size headphone jack
    • detachable power cord
    • signal-to-noise ratio: 91 dB
    • phono signal-to-noise ratio: 76 dB with MM cartridge
    • 17-1/8"W x 5-1/4"H x 16-5/8"D
    • weight: 21.6 lbs.
    • warranty: 3 years
    • MFR # M32

    What's in the box:

    • Integrated amplifier
    • 68" AC power cord
    • Remote control (HTRM 2)
    • 4 "AA" batteries
    • USB thumbdrive
    • 4 Feet
    • Cleaning cloth
    • Quick Setup Guide
    • Warranty Card

    Featured video:

    Customer reviews for NAD M32 Masters Series

    Loading reviews...

    Average review:

    4.0 out of 5 stars
    7 reviews

    Thanks for submitting your review

    Filter by rating

    Customer photos

    Customer provided image, click to load a larger version.
    Customer provided image, click to load a larger version.

    Sort reviews

    Sort by:
    Items per page:
    View page:

    Verified customer (What's this?)
    Verified employee review (What's this?)

    Reviewed on

    This review was collected as part of a promotion



    Crutchfield response
    Customer provided image, click to load a larger version.
    << >>

    More details on the NAD M32 Masters Series

    Stacey B.

    Features & specs

    Performance Specs
    Watts RMS per Channel (8-ohms) 180
    Watts RMS per Channel (6-ohms) Not given
    Watts RMS per Channel (4-ohms) 180
    Frequency Bandwidth 20-20k
    THD 0.03%
    Minimum Impedance 4 ohms
    Amplifier Class D
    Signal to Noise Ratio 91
    DAC Bit Depth 24-bit
    DAC Sample Rate 192 kHz
    Built-in DAC (Digital to Analog Converter) Yes
    Wi-Fi N/A
    Built-in Radio Tuner None
    Room Correction ---
    High-res Audio Playback
    From Network No
    From USB Thumb Drive (USB-A) No
    From Computer (USB-B) Yes
    Version Info Optional
    Receiver Mode No
    Transmitter Mode No
    AAC Playback No
    aptX Playback Yes
    aptX-HD Playback No
    LDAC Playback No
    RCA Line-level Inputs 2
    XLR Line-level Inputs No
    Phono Input Yes
    Optical Digital Inputs 2
    Coaxial Digital Inputs 2
    USB Input Yes
    HDMI Inputs 0
    Stereo Preamp Outputs ---
    Subwoofer Outputs No
    Recording Output Yes
    HDMI Output 0
    Home Theater Bypass No
    Pre-out/Main-in Loop No
    Headphone Output 1/4"
    Removable Power Cord IEC 3-prong
    Streaming Compatibility
    Apple AirPlay No
    Apple AirPlay 2 No
    DTS Play-Fi No
    Chromecast built-in No
    Roon No
    HEOS No
    BluOS No
    Dimensions and Warranty
    Width (inches) 17-1/8
    Height (inches) 5-1/4
    Depth (inches) 16-5/8
    Weight (pounds) 21.6
    Parts Warranty 3 Years
    Labor Warranty 3 Years

    Product Research



    Direct Digital Amplification: The NAD Master Series M32 employs an innovative DirectDigital Feedback Amplifier built under license from Cambridge Silicon Radio (CSR). This is a true digital amp (not just Class D) that is computer controlled and amplifies entirely in the digital domain, converting to analog at the speaker terminals. DirectDigital amplification combines all pre-amplification and power amplification functions into a single amplifying stage with incredible fast and accurate digital correction. Advanced software-controlled algorithms result in the shortest signal path from source to speaker to produce virtually no distortion and a high damping factor. This technology is among the fastest and most accurate amplification and error correction available.

    • Continuous Power:
      • 8Ω: 180 watts @ 20Hz-20kHz with 0.03% THD
      • 4Ω: 180 watts @ 20Hz-20kHz with 0.03% THD
    • Dynamic Power:
      • 8Ω: 220 watts
      • 4Ω: 360 watts
      • 2Ω: 400 watts

    Sophisticated Software: DirectDigital amplification combines all preamp and power amp functions of the Master Series M32 into a single amplifying stage controlled by software. Highly advanced mathematics determines all control functions including volume and filters. This produces a dramatic reduction in noise and distortion, and brings you much closer to both the music and the performers. Traditional volume controls that change the gain in an active analog circuit cannot approach the transparency of the M32. It also allows accurate tone controls that only change tone, without adding phase shift or distortion.

    Rugged Construction: The NAD Master Series M32 integrated amplifier's all-alloy casework is elegant and rugged. Rigid panels with magnetic iso-point feet provide a solid foundation for the multi-layer circuit boards and intricate internal construction.


    Asynchronous USB-B Port: The NAD M32 direct digital DAC is ready for the world of computer audio with its rear-panel asynchronous USB (type-B) input that can directly stream 24-bit/192kHz content from your Windows PC, Mac computer, or other network-attached storage device (NAS). Your computer will need to meet the following system requirements.

    • Windows PC Users: Microsoft Windows XP Service Pack 2 or higher, Microsoft Windows 7.
    • Mac Users: Minimum Mac OS X Snow Leopard (version 10.6) and later versions.
    Note: Download the "NAD USB 2.0 Audio Driver" (from NAD's website) and install this driver to your Windows computer. Mac OS X Snow Leopard (version 10.6) and later versions already include USB Audio 2.0 drivers (no need to download NAD USB 2.0 Audio Driver).

    Digital Inputs: The NAD M32 includes five digital audio inputs; two optical (Toslink), two coaxial (RCA), and one AES/EBU (balanced XLR).

    • Digital AES/EBU (XLR) Input: The NAD M32 is fitted with a Digital AES/EBU (XLR) jack to connect high-end audio sources, such as SACD and DVD-Audio players. For high-end sources with higher sampling rates like 176kHz and 192kHz, it is highly recommended that such sources be interfaced with the AES/EBU (XLR) In connector.
    • Digital Coaxial/Optical Inputs: The M32 also features two rear-panel optical (toslink) digital outputs and two coaxial (RCA) digital outputs to connect your digital audio components. Connect your CD, DVD, and Blu-ray disc players. The Digital inputs support sampling rates of 32-192khz.
    Note: If connecting to a television set's optical output, please make sure that you are able to select PCM as the default optical out audio format from your television's Audio menu. This DAC is not compatible with multi-channel audio signals and will not work with televisions that do not output PCM.

    Analog Inputs (including Phono): The NAD M32 is outfitted with two analog stereo RCA line inputs and a MM Phono input. An accurate RIAA equalization, a clever phase cancelling infrasonic filter, and a huge overload margin combine to bring out the best in your vinyl collection.

    Digital Output: The optical (toslink) output & coaxial (RCA) digital output can be used to connect the M32 integrated amplifier to a corresponding digital audio input of an AV receiver, computer, or other digital processor.

    Pre-Out: The integrated amplifier's stereo analog RCA output can be used as a full-range pre-out, making it possible for the M32 to be used as a full-range preamplifier to an external power amplifier. The stereo analog RCA output can also be used as a low frequency output to connect one or two powered subwoofers, so only low frequency information is sent to the connected powered subs. When used as a sub output, you have access to a variable low-pass crossover (40-200Hz) and trim level (-12 to 0dB).

    Two Sets of Speaker Terminals For Bi-Wiring: The M32 has two sets of speaker terminals which are identical in function and are wired in parallel. They allow for bi-wiring a single pair of speakers. Each speaker terminal consists of a binding post that will accept up to 10AWG wire, pin-connectors, and banana plugs (single only).

    Discrete Headphone Amplifier: The NAD Master Series M32 is equipped with a fully discrete headphone amplifier which is able to drive even planar and high impedance studio monitor headphones. With high voltage and low output impedance, your headphones will sound their best. Volume, tone, and balance controls are available during headphone listening. When a set of headphones is plugged into the front-panel 1/4" headphone jack, the integrated amplifier's speaker outputs will be muted.

    Modular Design Construction (MDC): Modular Design Construction (MDC) helps to prevent obsolescence by providing a simple upgrade path to add future features and functionality to the NAD Master Series M32 integrated amplifier. The following MDC modules are available -

    • BluOs Module: By simply adding the optional BluOS MDC Module(745MDBLUOS, sold separately), the M32 becomes part of the BluOS wireless multiroom music ecosystem. The BluOS module connects to your network via a wireless (WiFi) or wired (Ethernet) connection, and is controlled via Apple iPod touch/iPhone/iPad, Android smartphone/tablet, Windows PC, or Mac computer. BluOS supports streaming of internet radio, select online music services, and Hi-Res audio files. The BluOS module also includes dual USB (type-A) port for music file playback from USB mass storage class devices, like a thumbdrive or digital portable audio player. In addition the BluOS module offers built-in Bluetooth for wireless music streaming from a Bluetooth source device, such as a smartphone, tablet, or computer.
    • Balanced/Unbalanced & Phono MM/MC Module: The DD AP-1 module (745DDAP1, sold separately) adds a balanced and unbalanced analog line-level input, plus a MM/MC compatible phono input.
    • 4K HDMI Module The MDC HDM-2 (745HDM2, sold separately) adds HDMI capability with three HDMI inputs and one HDMI output for video plass-through. Based on the latest 6GHz HDMI chip, the MDC HDM-2 includes full support for UHD (4K) video pass through to a video monitor, plus support for 24-bit/192kHz 2Ch PCM (not compatible with Dolby Digital/DTS).
    • 1080p HDMI Module: The DD HDMI-1 module (745DDHDM1, sold separately) adds three HDMI inputs and one HDMI output for video pass through. Full 3D Video support with video resolution up to 1080p/60. Supports 2 channel PCM audio with 24-bit/192kHz resolution (not compatible with Dolby Digital/DTS).

     Note: These MDC modules are all sold separately (not included). You can add up to two MDC modules.


    Front-Panel Knob & Touchscreen: The integrated amp's single control knob for volume is supplemented by a TFT touchscreen display, which replaces a multitude of mechanical switches and expands the range of adjustments possible with detailed graphical readouts. Because the controls are all software defined, NAD can add new controls and features by simply upgrading to new firmware.

    Volume Control: The volume control adjusts the overall loudness of the signal being fed to the loudspeakers. Volume control is characterized by perfect signal tracking and channel balance. It gives a highly linear and low noise operation. The volume control can set to "Fixed" or "Variable".

    EQ: The M32 integrated amplifier offers Bass, Treble, and Balance control. Bass and Treble only affect the low (60Hz) and high (20kHz) frequencies, leaving the critical midrange frequencies free of coloration; adjustable from -10 to + 10dB. The Balance control adjusts the relative levels of the left and right speakers.

    IR Remote: An IR remote is also included for wireless operation of the NAD M32 integrated amplifier and NAD source devices.

    Remote Integration: The NAD M32 offers 12V triggers (in/out), IR In  and RS-232 port connectivity for remote integration.

    • IR In: This 3.5mm input is connected to the output of an IR (infrared) repeater (Xantech or similar) or the IR output of another component to allow control of the M32 from a remote location.
    • 12V Triggers: The 12V Trigger Input (3.5mm) allows the M32 to be switched On remotely from Standby Mode by compatible devices such as amplifiers, preamplifiers, receivers, etc. If the 12V DC supply is cut off, the M32 will return to standby mode. The 12V Trigger Out (3.5mm) is used for controlling external equipment equipped with a +12V Trigger Input.
    • RS-232 Port: The RS-232 port allows connection to a compatible PC or external whole-house control system from companies such as AMX or Crestron. NAD is a certified partner of AMX and Crestron and fully supports these external devices.

    Auto Standby: The integrated amplifier can be set go automatically go into standby mode after approximately 15 minutes of no audio signal and inactivity.

    Loading accessories...

    Customer Q&A

    1 question already asked

    I have to ask, I like listening to my music library on my iPhone, it doesn't support airplay (or any kind of streaming?) alternatieve is to use the analog l/r input? /
    rob  Feb 08, 2020
    2 answers
    It supports Bluetooth playback IF you add the BlueOS 2i MDC module (or its predecessor the BlueOS module. The module also supports streaming from Tidal, etc.
    john  Feb 21, 2020
    You can add an optional MDC BluOS 2i module to enable BLuOS streaming, using a dedicated app on your iPhone. This module also enables Airplay2 on certain NAD amplifiers, but not on the M32 unfortunately. I'm using an old Apple Airport Express connected via one of the optical digital inputs for Airplay.
    nigel  Feb 21, 2020

    Loading articles...

    Compare the sound