Bowers & Wilkins 607 S2 Anniversary Edition Bookshelf speakers (Oak/White)

Features

1" Decoupled Double Dome Aluminum Tweeter: The Bowers & Wilkins 607 S2 bookshelf loudspeaker adopts a refined and upgraded version of the proven Decoupled Double Dome Aluminum tweeter (1"), offering 38kHz breakup performance. The Decoupled Double Dome tweeter uses a thin and light aluminum dome, surrounded by a thicker ring, to prevent audible distortion. Decoupling also helps prevent cabinet vibrations reaching the tweeter. Synthetic gel cushions the decoupled tweeter, with the assembly isolated from the mounting hardware. The result is a more natural, spacious, and pure sound.

5" Continuum Cone Midbass/Midrange Driver: The 607 S2 bookshelf loudspeaker features a single 5" Continuum cone midbass/midrange driver, borrowed from B&W's 800 Series Diamond. Thanks to its composite construction, the Continuum cone provides a smooth and accurate sound by avoiding the abrupt transitions in behavior that can impair the performance of a conventional drive unit and cause distortion. As a result, voice and instruments are delivered with purity and precision.

Optimized Crossover Design: The Bowers & Wilkins 600 Series Anniversary Edition 607 S2 bookshelf speaker benefits from a new optimized crossover design featuring carefully selected components, offering greater detail from your music.

Flowport Technology: The B&W 607 S2 bookshelf speaker utilizes Flowport Technology to create smooth, deep, and efficient bass response. Its bass reflex enclosure features a rear-firing, dimpled flared port that provides natural bass response without turbulent noise or distortion. If you want to reduce the volume of bass without moving the speaker further from the wall, fit the included foam plug into the rear-firing port for lesser bass response.

Acoustically Transparent Magnetic Grille: The Bowers & Wilkins 607 S2 bookshelf loudspeaker comes with an acoustically transparent magnetic grille that's easy to install, looks great, and doesn't get in the way of the sound.

Dual Binding Post Terminals: The bookshelf speaker has two sets of binding posts connected by jumper straps. The binding post terminals will accept bare wire, pin connectors, spade connectors, or banana plugs (single only). There are plastic inserts that will need to be removed from the binding post terminals in order to use banana plugs. Using the dual binding posts terminals, you can choose to bi-amp or bi-wire the speaker (when facing the back of the cabinet - the upper set of binding posts are for the high frequency drivers; the lower set of binding posts are for the low frequency drivers).

• Bi-Wiring: Bi-wiring can provide noticeable improvements in the overall transparency of your loudspeakers. Run separate speaker wires to the low & high frequency drivers from a single amplifier.
• Bi-Amping: Bi-amping allows you to use separate amplifiers for the high & low frequency sections of your loudspeaker for greater dynamic range & lower distortion. We recommend that your separate amplifiers have identical gain to preserve the speaker's voicing balance.

Mounting & Placement Options: The Bowers & Wilkins 607 S2 bookshelf loudspeakers can be placed on a set of speaker stands (sold separately - see Accessories Tab), a table-top, shelf, or other piece of AV furniture. The included self-adhesive rubber feet prevent unwanted vibration and protect your furniture from scratches (the feet add approximately 0.25" to the overall height of the speaker). The B&W 607 S2 bookshelf speaker should be positioned as close to ear level of the main seated listening position as possible. Moving the speaker further from the walls will generally reduce the volume of bass. Space behind the speakers will also help to create an aural impression of depth. Conversely, moving the speakers closer to the walls will increase the volume of bass.

• Stereo Setup: The bookshelf speakers should be positioned between 4.9375' and 9.875' apart at two corners of an equilateral triangle completed by the listening area at the third corner. The speakers should be approximately 1.625' away from the back wall, and at least 1.625' away from any side walls.
• Home Theater: If the bookshelf speakers are to be used for the front channels in a home theater system, position the speakers within approximately 1.625' of the sides of the TV screen to keep the sound image in scale with the visual image. The speakers should ideally be at least 1.625' away from any side walls.

Bowers & Wilkins 600 Series (Anniversary Edition): The 600 Series Anniversary Edition delivers Bowers & Wilkins' storied sound in simple 2ch stereo applications or more complex home theater setups. The 600 Series Anniversary Edition consists of one floorstanding loudspeaker (603 S2), two bookshelf loudspeakers (S606 S2 / S607 S2), and a center-channel loudspeaker (HTM6 S2) - all sold separately.

Optional Powered Subs: If you want even more bass, add one of Bowers & Wilkins 600 Series powered subs (ASW608 / ASW610 / ASW610XP) - all sold separately.