About the Bowers & Wilkins FS-700 S3

These stands reduce sound-muddying vibration and place your Bowers & Wilkins 700 Series bookshelf speakers at the proper height for listening in a seated position — two factors that have a big impact on the sound. They can be filled with sand or shot to add mass and improve vibration damping, and speaker cables can be hidden away in the integrated cable duct.
Product highlights:
- 24" high
- can be filled with sand to add mass and vibration damping
- duct for cable management
- top plate dimensions: 6-1/8"W x 9-3/16"D
- rubber feet and carpet spikes included
- 11-7/16"W x 25-13/16"H x 11-7/16"D (with carpet spikes)
- weight: 13.2 lbs.
- warranty: 5 years
- MFR # FP43230
What's in the box:
Bowers & Wilkins FS-700 S3 owner's manual
- 2 Upright posts
- 2 Bases
- 2 Top-plates
- 8 Rubber feet
- 8 Spikes
- 8 Hex-nuts
- 8 Threaded sleeves
- Eight M4x15mm screws
- Eight M5x15mm screws
- 2 Hex-keys
- Assembly Instructions
Reviews (4)
Customer reviews for Bowers & Wilkins FS-700 S3
Loading reviews...
Average review:
4.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Bowers & Wilkins FS-700 S3

Features & specs
Number of Stands Included | 2 | |
Stand Type | Floor | |
Compatibility | B&W 700 S3 Series | |
Height | 25.8125 | |
Weight Capacity | 21.5 | |
Base Dimensions | 11.4375 x 12.4375 | |
Top Plate Dimensions | 6.125 x 9.1875 | |
Materials | Aluminum/Steel/MDF | |
Adjustable | No | |
Wire Management | Yes | |
Fillable | Yes |
Product Research
Features
Compatibility: The FS-700 S3 speaker stand has been designed by Bowers & Wilkins to perfectly match their 700 S3 Series bookshelf loudspeakers - including the 707 S3, 706 S3, and 705 S3 (all sold separately). The FS-700 S3 places the Bowers & Wilkins 700 S3 Series bookshelf loudspeakers at the perfect height for optimum audio performance. The 700 S3 Series bookshelf loudspeakers are secured to the stand using the included hardware and the threaded inserts under the loudspeaker. This speaker stand can also be used with other brands of bookshelf loudspeakers of similar size and weight (however, there is no hardware to secure other brands of speakers to the stand).
Note: The speaker stand's top-plate measures 6.125" (w) x 9.1875" (d), and can support up to 21.5 lbs.
High-Quality Construction: The Bowers & Wilkins FS-700 S3 speaker stand uses aluminum, steel, and MDF construction. The top-plate is made of solid steel, while the bottom base is made of heavy-duty MDF. The upright post is made of aluminum and is hollow so you can add filler to it to make the stand even heavier. It comes in a black or silver finish.
Wire & Cable Management: The rubber or spike feet of the speaker stand raise it off the floor enough so you can route your speaker wire under the base and up through the hollow upright post to your mounted bookshelf loudspeaker.
Rubber & Spike Feet: The FS-700 S3 speaker stand includes rubber and spike feet. Use the rubber feet for hardwood, tile, vinyl, and laminate flooring. Use the spike feet for carpeted flooring. The rubber or spike feet screw into the bottom of the stand. The feet are adjustable, so you can level the speaker stand on uneven floors.
- Dimensions with Rubber Feet: 11.4375" (w) x 25.0625" (h) x 12.4375" (d)
- Dimensions with Spike Feet: 11.4375" (w) x 25.8125" (h) x 12.4375" (d)
Note: The FS-700 S3 speaker stand should always be used with either the rubber or spike feet installed for optimum performance and maximum stability.
Loading accessories...
Customer Q&A
Loading articles...
The speaker stands are great quality and enhance the performance of the speakers.
Douglas from Riverview, FL