Audioengine DS2
Alphonse from Athol, MA on 4/16/2025
These replaced metal stands i had. These are so much better,plus they are beefier and more sturdy. They are great!
Pros:
Cons:
0 of 0 found this helpful
Audioengine DS2
Oscar from Guaynabo, PR on 10/2/2024
i use my Audioengine HD 6 speakers on top of my office files so, i use DS2 inverted so the tilt is downward to my seat
Pros:
Cons:
0 of 0 found this helpful
Audioengine DS2
Ronald from Radcliff, KY on 7/1/2024
0 of 0 found this helpful
Avoid!
Crutchfield customer from Berkeley, CA on 9/4/2023
It's been four years since I bought my Audioengine speakers, and I've had to replace my speaker stands twice. They fail under the weight of the speaker, and are simply not sturdy enough. Very disappointing.
Pros:
Cons:
1 of 1 found this helpful
Audioengine DS2
Crutchfield customer from Hamburg, NJ on 10/13/2022
0 of 0 found this helpful
OK Product
Crutchfield customer from Temple, TX on 12/19/2021
The speaker stands are OK, but pricy based on the rubber material, need to work with them to have the speakers situated the right way on them.
Pros: Once you get the speakers situated on them, their OK.
Cons: Pricy for the type of material that they are made from, flexible rubber.
1 of 1 found this helpful
Used with AudioEngine A5+
Hayden from Layton, UT on 9/16/2021
Straightforward design, can be used to angle the AudioEngine A5+ speakers up towards you if they are sitting on a cabinet or something below eye level or angled down in case they are on a shelf above eye level. Really solid construction. Great absorption properties so the speakers don't rattle whatever surface they are sitting on. Very pleased!
Pros:
Cons:
0 of 0 found this helpful
Perfect at a price
Crutchfield customer from Saint Paul, MN on 3/16/2021
Sized to perfectly fit the Audioengine A5+ speakers. Would work for other similar devices. Angle is perfect to point tweeters at the ears in a near field listening environment. Docking a star because these are overpriced for what they are and for the excessive packaging (neither issue is Crutchfield's fault).
Pros: They do the job perfectly
Cons: overpriced for what is basically a thin plastic wedge.
2 of 2 found this helpful
Audioengine DS2
Crutchfield customer from Lakewood, OH on 2/7/2021
These stands do seem to open up the sound a good bit. Worth the purchase.
Pros:
Cons:
1 of 1 found this helpful
I'm very impressed
Crutchfield customer from Hampton Cove, AL on 9/6/2020
Fits my A5+ perfectly. Makes a very improved audio difference.
Pros:
Cons:
1 of 1 found this helpful
Audioengine DS2
Crutchfield customer from New Brighton, MN on 7/26/2020
Exactly as advertised. Great addition to the speakers.
Pros:
Cons:
0 of 0 found this helpful
Audioengine DS2
Crutchfield customer from Powhatan, VA on 3/15/2020
work perfectly as designed and price not bad
Pros:
Cons:
0 of 0 found this helpful
Audioengine DS2
Crutchfield customer from Cary, NC on 5/28/2019
Fits the speakers perfectly and even look like they are part of the speakers.
Pros:
Cons:
0 of 0 found this helpful
Audioengine DS2 Speaker Stands
Rich from Dagsboro, DE on 12/21/2018
I bought these stands to use with my Monitor Audio Bronze 1's and they work great. The stands position the speakers to project sound upward.
Pros: Position speakers well. Light weight. Can ge secured at base with 3M tape.
Cons: A little pricey.
0 of 0 found this helpful
Audioengine DS2
Crutchfield customer from Wisconsin Rapids, WI on 2/8/2017
0 of 0 found this helpful
Audioengine DS2
Crutchfield customer from Charlotte, NC on 1/16/2017
These stands are great... they project the sound up where it needs to be while the speakers are situated on a lower stand... wonderful addition.
Pros:
Cons:
2 of 2 found this helpful
simple and effective
mark from Baltimore, MD on 6/5/2016
0 of 1 found this helpful
Good Product
John from Pennsylvania on 10/8/2015
Definitely recommended to go with the Audioengine A5+'s.
Pros: Price, durability and looks.
Cons: None
0 of 0 found this helpful
Great speaker stand
R N Mikaele from Hawaii on 4/17/2015
Simple style. Simple made. Simple setup. Nice price.
Pros: As stated in review.
Cons: None
0 of 0 found this helpful
Exceeded Expectations
ChrisH from DC Area on 9/9/2014
Recently acquired some lightly used Onkyo speakers. I needed a way to mount my center channel speaker. With the way my desk is arranged the speaker would sit above me on top of the desk shelf and I wanted to have it mounted in a way that would have the speaker angled down firing at head/ear level. I saw these mounts here on Crutchfield after looking hard over different mounts and decided that if I reversed the intended design they might actually work for my particular need and application. Turns out they worked fantastic in the way that I wanted to get the speaker angle down to head/ear level. Very durable. A sort of vinyl/rubber plastic. My main concern was whether the lip on these stands would work to hold the curved cabinet surface of the center channel in place. I was relieved and excited that the lip was actually much bigger (1/2 inch) and holds my center channel in place perfectly even at the 15° down angle without fear of the speaker sliding over and off the mounts.
Pros: Durability, ease of use and placement. 15° angle works great for most intended applications.
Cons: If there was one it might be the size of these mounts as they are wide and long but work perfectly for their intended application.
2 of 2 found this helpful
Awesome
George R from Dover De on 6/5/2013
work great,
Pros: help with speaker placement for ear level
Cons: none
1 of 1 found this helpful
Excellent product
DSG from McKinney, TX on 3/24/2013
These stands are well constructed so that they isolate powered speakers on the desktop and angle them to ear level. They are a necessary addition to desktop speaker placement.
Pros:
Cons:
2 of 2 found this helpful
