Customer Reviews

Nice kit

I have a 2012 ford flex with sony, sync, and nav. I got everything to work but took a couple tries. Some of the instructions are not very detailed. There is some trimming of the plastic inside the dash. How much you need to trim depends on the size of the radio going in. You will need to swap one of the connectors on the maestro to get the back up cam to work. Tech support helped me with that. Crutchfield tech support is awesome as usual!

Have questions for
?

Crutchfield response on

Plug and play, excellent

The maestro wiring diagram could use a little work, but overall this is a true plug and play kit, and worked phenomenally. Props to Maestro for having such good customer service to help walk through some of the trickier parts of the install. If you are unfamiliar with this work, it will probably take you the whole day to figure it all out and finish it up. But now that I've done it once I could probably do it again in about 3 hours

Have questions for
?

Crutchfield response on

iDatalink FOR1 Dash and Wiring Kit

Details for install is very vague. No tech support help

Have questions for
?

Crutchfield response on 11/20/2024

Once we saw this review, our Tech Support specialist, Etch, reached out to Brad to help. Whenever you encounter a problem with anything you purchase from Crutchfield, please contact our Tech Support team right away. Lifetime tech support comes with every Crutchfield purchase.

2010 F150 wNav Kenwood 8907s

The unit works fairly well. The cons that I have experienced are; the resolution on the camera and brightness is less than factory using the factory camera, the user screen is less customizable than I believed it to be, and the gauge selections are fewer than expected. Some of this is due to vehicle model and or the head unit selected.

Have questions for
?

Crutchfield response on

iDatalink FOR1 Dash and Wiring Kit

Works perfect just as advertised

Have questions for
?

Crutchfield response on

iDatalink FOR1 Dash and Wiring Kit

The iDatalink For1 Dash Kit made installation a breeze plug and play and go on and joy your head unit

Have questions for
?

Crutchfield response on

iDatalink FOR1 Dash and Wiring Kit

Everything worked perfectly, installed in my 2012 F150 Harley Davidson. Perfect fit, no modifications.

Have questions for
?

Crutchfield response on

iDatalink FOR1 Dash and Wiring Kit

This was the perfect kit needed to replace the oem Sony Nav in my 2011 Ford F150 Platinum. This kit paired with the Maestro RR2 allowed me to keep my factory controls for a/c and other functions. It's worth the price for the convenience added to the install.

Have questions for
?

Crutchfield response on

FOR1 Dash and Wiring Kit for 2010 F150

Great kit to go along with the iDatalink Maestro RR. Everything was plug and play and cut the install time down considerably. Highly recommend. Installed with a Kenwood receiver in a 2010 F150 that had Factory Navigation.

Have questions for
?

Crutchfield response on

Thrilled Customer

I think your product is a 10 on a 10 scale. I was able to upgrade my 2012 Ford F150 FX2 to a Sony XAV-AX4000 stereo. It is so nice to have Apple CarPlay and access to Navigation (Waze and Google Maps.). They quit updating my Ford navigation in 2009. The system looks beautiful and I can hear my Pandora and Amazon Music. I couldn't be happier. Thank you Crutchfield.

Have questions for
?

Crutchfield response on

8 pin connector not used 2011 F150 Raptor

The wiring kit works great, but for a 2011 F150 Raptor with factory navigation and subwoofer, there is an 8 pin connector that is not used and the documentation doesn't state anything about this. Combined with the Maestro RR flashing read twice error (due to something else), it made for some head-scratching. The directions stated that some wires wouldn't be used for this application, but nothing about the 8 pin connector, which made me think I either dropped a wiring harness into the void, or someone messed with the wiring in my truck and it wasn't going to work. Eventually got everything working.

Have questions for
?

Crutchfield response on 5/31/2023

Mark contacted our Tech Support team for help. Whenever you encounter a problem with anything you purchase from Crutchfield, please contact our Tech Support team right away. Lifetime tech support comes with every Crutchfield purchase.

Best overall package

This is everything you'd need to change the factory head unit for another receiver. It has the brackets, the bezek, the harness, everything. I would recommend paring this with the maestro RR and also use the REadyHarness offered. It made the installation a breeze, plug and play basically. Some trimming is needed to fit the new radio. This is stated in the instructions however the plastics that needed to be cut are thick, and it takes more that a basic razor blade and common tools, it can be done but I found it best to get a professional to do this part, just the trimming.

Have questions for
?

Crutchfield response on

iDatalink FOR1 Dash and Wiring Kit

Work fine, install instructions for connectors were vague in some cases, check with Chris in customer service for details

Have questions for
?

Crutchfield response on

iDatalink FOR1 Dash and Wiring Kit

Well worth the money to get the kit. The new radio looks like it was factory installed.

Have questions for
?

Crutchfield response on

Nice Kit

Was very nice an straight forward. Great instruction. My only complaint was that there was one connector of the main 3 on the T-harness that was not a match for my vehicle (2011 Ford F-150 SVT Raptor). Truck was a 10 pin and kit came with an 8 pin. Crutchfield and iData said it was for the factory subwoofer and that it was unnecessary? Didn't matter because I was bypassing the factory sub anyway, but I didn't like that.

Have questions for
?

Crutchfield response on

iDatalink FOR1 Dash and Wiring Kit

Plug and play harness is a great thing. Wiring this myself would have been terrible.

Have questions for
?

Crutchfield response on

iDatalink FOR1 Dash and Wiring Kit

It was needed made the job easier

Have questions for
?

Crutchfield response on

Simple wiring

Made the wiring connections much more simple. Some trimming was required for the brackets but it was in the instructions.

Have questions for
?

Crutchfield response on

iDatalink FOR1 Dash and Wiring Kit

Could not be happier..... Installed a Kenwood radio into my wifes 2011 F150 Platinum. This kit made the install a piece of cake.. Could not be happier and my wife is SUPER happy she is no longer stuck with the factory headunit.

Have questions for
?

Crutchfield response on

iDatalink FOR1 Dash and Wiring Kit

I used this in conjunction with the iDatalink Maestro RR Interface Module to install a JVC 750BT unit with CarPlay in my 2013 Mustang GT. Installation was straightforward and no factory wiring had to be cut.

Have questions for
?

Crutchfield response on

iDatalink FOR1 Dash and Wiring Kit

It was heard to find but thay had it n it was eaz to put in

Have questions for
?

Crutchfield response on

Easy 5 stars

Perfect kit. Perfect kit

Have questions for
?

Crutchfield response on

Easy install with correct tools

Had to do more cutting than I'd like but nothing too dramatic. Otherwise an easy install that fits pretty well. Super easy to use idatalink maestro, just plug it in (after programming).

Have questions for
?

Crutchfield response on

iDatalink FOR1 Dash and Wiring Kit

Installed this in a 2011 Ford Raptor with Sony SYNC, factory nav and factory sub woofer. I replaced the factory stereo with a Kenwood DMX907S. For the most part the install was straight forward and easy. However i did run into 2 issues. Only 2/3 plugs would plug into the factory harness and the factory subwoofer would not work after install. I tried to modify the 3rd plug on the FOR1 harness to fit the factory plug which i was able to do but still no subwoofer. I even had Crutchfield on the phone and used the support.com app to show the tech the harness in real time using my camera like a mobile zoom meeting. Still no luck. So if anyone is able to use this and get the sub to work, please write a review. 2nd issue was with the OBD plug. After plugging it in to my OBD port and putting the truck in drive i got a wrench icon and the truck went into limp mode. After i shut the truck off and unplugged the FOR1 OBD plug the truck ran fine and has been working fine since. Other than that i'm very happy with the kit and very excited to have Carplay in a vehicle that was once thought not to be able to upgrade from SYNC 1. Also very pleased with Crutchfield support

Have questions for
?

Crutchfield response on

iDatalink FOR1 Dash and Wiring Kit

Worked as described and not at all hard to install

Have questions for
?

Crutchfield response on