Chat
Contact us
Close contact box
Connect ID #
026 386 387 4
Connect ID #
026 386 387 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

Yamaha PA2120 Power amplifier - 120W x 2 at 70V

Item # 845PA2120

Provides up to 120 watts of power per channel — perfect for an eatery, conference center, or classroom.

Provides up to 120 watts of power per channel — perfect for an eatery, conference center, or classroom.

Item # 845PA2120

In stock
$693.99

About the Yamaha PA2120

Eric A.

Compact power amp for your business

The Yamaha PA2120 provides 120 watts x 2 channels for standard speakers or a 70-volt system — perfect for a small eatery, conference center, or classroom. 

Get started with
a free system design

After we gather your information, we'll send you a detailed system plan. It will include a link to a pre-filled shopping cart. Ordering is easy, and delivery is fast.

Give us a call
1-800-315-2758
Submit a design request
Tell us about your space

Yamaha Commercial Audio logo

Compact power amp for your business

The Yamaha PA2120 provides 120 watts x 2 channels for standard speakers or a 70-volt system — perfect for a small eatery, conference center, or classroom. 

See what our satisfied customers have to say.

READ LESS

Product highlights:

  • efficient 2-channel class D power amplifier
  • power output: 120 watts x 2, 200 watts x 1 bridged
    • drives up to 16 speakers in two zones in a 70-volt system
  • balanced inputs with removable Phoenix style I/O connectors (included)
  • stereo RCA unbalanced inputs
  • frequency response: 20-20,000 Hz
  • 18-15/16"W x 1-13/16"H x 14-15/16"D
  • weight: 10.6 lbs.
  • warranty: 5 years
  • MFR # PA2120

What's in the box:

  • Rack-mountable 2-channel power amplifier
  • 78" AC power cord (IEC 3-prong)
  • 3-pin Euroblock plug
  • 6-pin Euroblock plug
  • Owner's Manual (3 copies: Eng / Span / Fren)
  • Technical Specifications
  • About Using BSD-licensed software

Customer reviews for Yamaha PA2120

Loading reviews...

Average review:

5.0 out of 5 stars
1 review

Thanks for submitting your review

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Crutchfield response
Customer provided image, click to load a larger version.
<< >>

More details on the Yamaha PA2120

Russ B.

Product Research

Features

Overview: The PA Series of commercial amplifiers is a quick and easy solution to providing audio in restaurants, classrooms, retail spaces, and offices. The PA2120 accepts one stereo and two mono line inputs, allowing you to select from several different sources.

Output Power: The PA2120 has the following output power:

  • 100 watts per channel x 2 channels at 3Ω (Lo-Z)
  • 120 watts per channel x 2 channels at 4Ω (Lo-Z)
  • 100 watts per channel x 2 channels at 8Ω (Lo-Z)
  • 120 watts per channel x 2 channels at 70V / 120W (Hi-Z)
  • 120 watts per channel x 2 channels at 100V / 120W (Hi-Z)
  • 200 watts per channel x 1 channel at 70V / 200W (Hi-Z)
  • 200 watts per channel x 1 channel at 100V / 200W (Hi-Z)
Note: The amplifier has a 4-pin, 7.62mm barrier strip speaker terminal.

Connections and Controls:

  • Front Panel:
    • Volume A / Volume B: Separate rotary control adjusts the volume output to the speakers. Above the volume knob are two LEDs: the Volume Signal LED lights when the signal output exceeds a certain level; the Volume Limit LED lights to indicate the limiter has activated, and the volume needs to be turned down.
    • Bass / Treble: Separate bass and treble controls are provided for Channel A and Channel B. A small screwdriver is needed to make adjustments to the equalizer.
    • Power Switch: The power button lets you turn the amplifier on and off. The button glows green when the unit is on, and orange when it's in standby. The device will automatically enter standby mode when no input signal is detected for 25 minutes. A DIP switch on the rear panel can be set to enable the auto-wake function to turn on the power when an input signal is detected.
  • Rear Panel:
    • AC Power Input: An IEC 3-prong input for connecting the supplied power cord, or an optional power cord.
    • Speaker Terminals: Barrier strip type speaker outputs. You can make high-impedance connections (100V or 70V) or low-impedance connections (3Ω/4Ω/8Ω). Spade lugs (±0.23" outer width) or bare wire connections work best. (For Hi-Z 1-channel connections, only terminals A+ and B- are used)
    • Setup/Speaker A/Speaker B DIP Switches: (see below)
    • DCP: An RJ-45 port is provided for connecting a Yamaha Digital Control Panel (DCP), such as the DCP1V4S, DCP4S, or DCP4V4S.
    • Remote: A 3-pin Euroblock connector is provided for connecting a remote control for muting/unmuting all channels or switching the power from standby to on or from on to standby.
    • Thru Out: An unbalanced stereo RCA output is provided for sending an unaltered signal to an additional amplifier to drive more speakers.
    • Input: One stereo RCA line input (unbalanced) and one 6-pin Euroblock connectors (balanced) for connecting external sources.
    • Mode Switch: This 3-way switch lets you set the method by which the input signals from Input A and Input B are sent to the output. You can choose from the following:
      • Stereo: Input A signal sent to Output A, Input B signal sent to Output B
      • Mono: Output to A and B with Input A and Input B signals mixed as mono.
      • Parallel: Input signals from A and B are mixed as mono and sent from Output A. Output B is muted

DIP Switches: The amp features three sets of 8 DIP switches on the rear panel. These DIP switches let you configure the amplifier (Setup) and each speaker output (Speaker A, Speaker B) to suit your needs and application. Using switches 1, 2, and 3 of the Speaker A and Speaker B DIP switches, you can select the amplifier output power and impedance. The Setup functions available are as follows:

Switch Function
1 Panel Lock on/off
2 (not used)
3 Auto-wake function
(3 options)
4
5 A-B Volume Link
6 (not used)
7 (not used)
8 DCP setup

Optional DCP: The amplifier features an interface for adding an optional DCP1V4S Digital Control Panel. The wall-mounted DCP gives you remote source and volume control over the amp. An RJ-45 port is provided for the DCP interface. CAT5e cable is recommended.

Specifications:

THD+N (Stereo In to Speaker Out):

  • 1 kHz, 3Ω/4Ω: ≤ 0.2%
  • 1 kHz, 120 W, 70V/100V: ≤ 0.2%
  • 1 kHz, 200 W, 70V/100V: ≤ 0.2%

Frequency Response:

  • Line In to Thru Out: 20 Hz to 20 kHz (0 dB, -2.5dB, +1.0dB)
  • Line In to Speaker Out (1W, 3Ω/4Ω): 50 Hz to 20 kHz (0 dB, -3.0dB, +1.0dB)
  • Line In to Speaker Out (1W, 70V/100V): 90 Hz to 20 kHz (0 dB, -3.0dB, +1.0dB)

Dimensions: Width 18.875" (Chassis only 16.875"), Height 1.765" Depth 16.375" (w/AC cord)

Weight: 10 pounds 9.31 ounces

Loading accessories...

Customer Q&A

Loading articles...

Compare the sound