About the Yamaha VXS10ST
Product highlights:
- 10" surface mount subwoofer for commercial applications
- bass-reflex cabinet for smooth, distortion-free low-frequency extension
- 70V taps: 25W, 50W, 100W, 200W
- frequency range: 45-250Hz
- no 8-ohm bypass
- peak SPL: 96 dB
- 4-pin Euroblock input connector
- 4-pin Euroblock satellite output connectors for a pair of full-range speakers
- protective power limiting built in
- can be mounted in horizontal or vertical configuration to suit your space
- wall-mount hardware supplied
Dimensions and warranty:
- 10-1/4"W x 19-5/8"H x 15-1/4"D
- weight: 43 lbs.
- warranty: 1 year
- MFR # VXS10ST
- Item # 845VXS1STB
What's in the box:
- 70/100V Subwoofer (black)
- 2 Mounting brackets
- 1 Speaker mounting bracket
- 1 Mounting bracket base
- 4 Rubber spacers
- 12" Safety wire
- Four 30mm bolts
- Four 14mm screws w/ attached flat and split-lock washers
- 4 Split-lock washers
- 4 Flat washers
- 5 Copies of the owner's manual (Eng / Span / Fren / Others)
- Safety information
More details on the Yamaha VXS10ST
Features & specs
| General | ||
|---|---|---|
| Drivers Per Speaker | 1 | |
| Woofer Size (inches) | 10 | |
| Tweeter Size (inches) | N/A | |
| System Frequency Response | 45-250Hz | |
| Maximum SPL | 96 | |
| Number of Speakers Included | 1 | |
| Power Handling | ||
| Power Rating | 50-200 | |
| Peak Power Rating | --- | |
| 70V Transformer Taps (watts) | 25w, 50w, 100w, 200w | |
| 100V Transformer Taps (watts) | 50w, 100w, 200w | |
| 8-ohm Bypass | No | |
| Specs | ||
| Width (inches) | 10-1/4 | |
| Height (inches) | 19-5/8 | |
| Depth (inches) | 15-1/4 | |
| Weight | 43 lbs | |
Product Research
Features
Bass Reflex Enclosure: The Yamaha VXS10STB features a 10" dual voice coil subwoofer housed in a bass reflex enclosure with a tuned port, providing greater efficiency and a smooth, distortion-free low-frequency extension.
70/100V: Designed for commercial use, the VSX10STB features a built-in transformer for use in both 70 and 100 volt installations. A single Euroblock connector with jumper wire is used for setting the wattage "tap" with the following power options:
- 70V: 25W, 50W, 100W, and 200W
- 100V: 50W, 100W, and 200W
Note: The VXS10STB does not include an 8Ω bypass for standard low impedance operation.
Inputs/Outputs: Input connection is conveniently provided by a removable Euroblock connector (4-pin), providing secure connection via screw-down terminals and allowing a system to be pre-wired before installing the subwoofer. Separate connector terminals are provided for the input and for the pass-thru wires, making it easy to jumper the speaker signal to additional speakers. The input terminals can accommodate speaker wire up to 12 gauge wire.
- Input Terminals: Terminals 2 (+) and 3 (-) are the input terminals of the loudspeaker.
- Loop-Thru Terminals: Terminals 1 (+) and 4 (-) are the pass-thru terminals for passing the audio signal to another subwoofer or sub/satellite system.
- Satellite Outputs: A 4-pin Satellite Speaker output connector allows connection of a pair of optional satellite speakers (sold separately) such as the Yamaha VXC4, VXC6, VXC8, VXC3F, VXS3F, VXS5, and VXS8 speakers.
Mounting: The included surface-mount bracket system and hardware allow you to mount the subwoofer to a wall. The subwoofer can also be ceiling mounted with the optional UB-DXR8 bracket (sold separately). For either mount, a rear-panel eye-bolt allows the included 12" safety wire to be installed on the speaker and attached to the wall or ceiling.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
