About the JBL SLP12/T

Product highlights:
- 3" full-range driver
- multi-tap transformer for use in 70V/100V systems
- 70-volt taps: 1.9, 3.8, 7.5, and 15 watts
- 100-volt taps: 3.8, 7.5, and 15 watts
- 8-ohm bypass for use with traditional receivers and amplifiers
- handles 80 watts continuous program power at 8 ohms
- frequency response: 91-18,000 Hz
- sensitivity: 84 dB
- 108 dB maximum SPL
- coverage: 120° horizontal x 120° vertical
- design imparts 15° downward tilt for optimal coverage
- built-in cable-management channel allows flush on-wall mounting
- included slide-in wall bracket
- rain cover protects terminal compartment in outdoor applications
- paintable powder-coated weatherproof grille
Dimensions and warranty:
- 9-13/16"W x 9-3/16"H x 4"D
- weight: 4.2 lbs.
- warranty: 5 years speakers, 2 years enclosure
- MFR # JBL-SLP12/T-WH
- Item # 855SL12WH
- California customers: Please click here for your Proposition 65 WARNING.
What's in the box:
- Two 70/100V on-wall loudspeakers (white)
- Two 4-pin Euroblock connectors (installed)
- 2 Mounting brackets
- Specifications sheet
- Installation guide
More details on the JBL SLP12/T

Features & specs
General | ||
---|---|---|
Drivers Per Speaker | 1 | |
Woofer Size (inches) | N/A | |
Tweeter Size (inches) | N/A | |
System Frequency Response | 91Hz-18k | |
Maximum SPL | 108 | |
Number of Speakers Included | 2 | |
Power Handling | ||
Power Rating | 80 | |
Peak Power Rating | --- | |
70V Transformer Taps (watts) | 1.9W, 3.8W, 7.5W, 15W | |
100V Transformer Taps (watts) | 3.8W, 7.5W, 15W | |
8-ohm Bypass | Yes | |
Specs | ||
Width (inches) | 9-13/16 | |
Height (inches) | 9-3/16 | |
Depth (inches) | 4 | |
Weight | 4.2 lbs |
Product Research
Features
On-Wall Speaker: The JBL SLP12/T on-wall loudspeaker that can provide rich, detailed sound with broad, consistent coverage in a sleek, low-profile design. The elegantly finished speaker is designed for flush-mounting to a wall and features a 15° down-tilted angle that can provide a wide 120° (h) x 120° (v) coverage pattern from the single 3" full-range driver. The SLP12/T can be installed indoors or outdoors, and is an ideal choice for restaurants, hotels, resorts, retail stores, and any application requiring a high-quality speaker with a discreet yet elegant look.
3" Driver: The SLP12/T features a single 3" full-range driver with a polypropylene cone and a 0.8" Kapton former voice coil.
Enclosure: The JBL SLP12/T is housed in a durable polycarbonate/ABS sealed enclosure that carries a UL94V-0 flammability rating. The driver is protected by a powder-coated zinc-plated grille. The enclosure and grille are both paintable.
70/100V Transfomer: The JBL on-wall speaker features a 15W transformer for installation in 70V or 100V applications. A tap dial on the back of the speaker provides the following selections:
- 70V: 15W, 7.5W, 3.8W, 1.9W
- 100V: 15W, 7.5W, 3.8W
- 8Ω: An 8-ohm bypass setting allows the speaker to be powered conventionally:
- 80W continuous program power (2hrs.)
- 40W (160W peak) continuous pink noise (2hrs.)
- 20W (80W peak) continuous pink noise (100hrs.)
Terminals: A 4-pin Euroblock connector, accepting wire up to 14-gauge, provides the connection to the speaker. Two pins are use as the input, while the two additional pins let you daisy-chain the signal out to additional speakers. A protective cover is provided to help shield the connector from rain or water ingress. With the cover installed, the SLP12/T carries an IP44 waterproof rating for outdoor use (per IEC529).
Monting: The JBL SLP12/T includes a wall-mount bracket that allows the speaker to simply slip over it, making installation and removal of the speaker easy.
Note: Hardware for installing the mounting bracket to a wall is not included and must be purchased separately.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
These speakers have really transcend our Worship services experience, the crystal clear sounds, have replaced a muffled sound that we had before.
Arnold from Winston Salem, NC