Chat
Contact us
Close contact box
Connect ID #
899 118 857 4
Connect ID #
899 118 857 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

Wet Sounds VS-1200-AMP 4-channel amplifier with outdoor enclosure

Item # 867AMPSYS4

This rugged amplifier delivers 200 watts x 4 and includes a water-tight landscape enclosure for outdoor use.

This rugged amplifier delivers 200 watts x 4 and includes a water-tight landscape enclosure for outdoor use.

Item # 867AMPSYS4

In stock
$1,999.98

About the Wet Sounds VS-1200-AMP

Eric A.

An amplifier for outdoor use

This rugged four-channel amplifier is designed to drive multiple Wet Sounds Venue Series speakers or subwoofers. It delivers 200 watts per channel into four channels. The included water-tight landscape enclosure has room for the amplifier and a compact media streamer like the Sonos Port (not included). Its built-in fan keeps your gear running cool. Internal AC power outlets and an external power cord facilitate an easier setup.

Product highlights:

  • 200 watts x 4 at 4 ohms
  • 300 watts x 4 at 2 ohms
  • frequency response: 5-20,000 Hz
  • signal to noise ratio: 88 dB
  • independent 3-position gain switches for channel pairs 1/2 and 3/4
  • selectable subwoofer crossover
  • weather-resistant enclosure:
    • internal cooling fan with 100° thermo-controlled switching
    • internal 110V AC power outlets, and an external power cord for easier installation
  • amplifier dimensions: 11"W x 2-1/8"H x 7-1/8"D
  • enclosure dimensions: 12-1/2"W x 17"H x 8-3/4"D
  • warranty: 2 years
  • MFR # VS-AMPLIFIER SYSTEM-4

What's in the box:

  • This package contains 2 individually boxed items:
  • VS-1200-AMP
  • 4-Channel amplifier w/attached 9" speaker output cables (terminated in watertight connectors) and 15" AC power cord (IEC 3-pin)
  • Four 9" speaker harnesses (watertight connectors on one end / bare-ended wire on other end)
  • Owner's manual
  • VS-LS-ENC
  • Landscape amplifier enclosure w/attached 29" AC power cord (IEC 3-pin)
  • 19" 3.5mm TRS cable (male on both ends)
  • 4 Mounting tabs
  • Four 5mm screws
  • Four 12mm screws
  • Quickstart guide

Customer reviews for Wet Sounds VS-1200-AMP

We don't have any reviews, yet.
Submit a review and then enter to win a $350 gift card.
Be the first to review this product

Loading reviews...

Thanks for submitting your review

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Crutchfield response
Customer provided image, click to load a larger version.
<< >>

More details on the Wet Sounds VS-1200-AMP

Stacey B.

Product Research

Amplifier
Outdoor Enclosure

Amplifier

Overview: The Wet Sounds VS-1200-AMP is a 4-channel amplifier designed for powering outdoor speakers, including Wet Sounds Venue Series speakers (sold separately). The amp includes a landscape enclosure designed specifically to house it outdoors while providing optimum weather protection.

Configuration: The VS-1200-AMP features four output channels that are fed by two RCA inputs. The left input feeds channels 1/3 and the right input feeds channels 2/4. Outputs are provided on four built-in 9" speaker harnesses terminated in watertight connectors. Four 19" speaker harnesses, with matching watertight connectors, are included and have bare-ended 14 ga. wire on the other end. Each speaker output can power a 2Ω or 4Ω speaker load (bridging not available). The VS-1200-AMP can provide the following output power:

  • 2Ω: 4 x 300W
  • 4Ω: 4 x 200W

Low-Pass Output: Two subwoofer On/Off switches can apply a 100Hz low-pass crossover to output channels 1/2 & 3/4 for powering an optional subwoofer (sold separately).

Selectable Gain: Two 3-way switches are provided for setting the input gain for channels 1/2 & 3/4. Each Gain setting is designed for use with Wet Sounds Venue Series speakers.

  • Position 1: Full-range.
  • Position 2: Subwoofer low.
  • Position 3: Subwoofer high.

12V Trigger: The VS-1200-AMP features a 12VDC trigger input for activating the amp from a receiver or playback device with a 12VDC trigger output. A 19" 3.5mm TRS cable is provided for use the the 12VDC trigger input.

Power: The Wet Sounds 4-channel amplifier features a built-in 15" AC power cord for powering the amp. An AC power socket is provided inside the included outdoor enclosure for plugging the amp into. Power is fed to the enclosure through its own AC power cord.

Amp Dimensions: Width = 11.0", Height = 2.13", Depth = 7.13"

Outdoor Enclosure

Enclosure Overview: The included Wet Sounds VS-LS-ENC heavy-duty enclosure has been specifically designed to house the VS-1200-AMP. The enclosure includes pre-drilled mounting holes on the rear panel for mounting it to an outside wall (mounting hardware included). An internal mounting plate is pre-drilled for mounting the amplifier, and includes an additional space for mounting a small media player such as the Sonos Port Network Audio Player (sold separately). The enclosure's latching front door includes a rubber gasket for providing a water-tight seal, and features a protruding tab for adding an optional padlock (not included).

Conduit Openings: Two 0.54" diameter openings with conduit clamps are provided on the bottom panel, for running wire into the enclosure.

Cooling: The VS-LS-ENC features 2 screened openings in the door for ventilation - one with a built-in cooling fan that's pre-wired to the enclosure's power input. Both openings feature molded, down-facing hoods to protect them from water and dirt ingress.

Power: The VS-LS-ENC receives power through a built-in 29" AC power cord (IEC 3-pin). The power cable internally terminates into 2 standard 3-prong outlets, one for powering the amplifier and the other for powering an optional player.

Enclosure Dimensions:

  • Exterior: Width = 12.50", Height = 17.0", Depth = 8.75"
  • Amp Mounting Area: Width = 7.25", Height = 14.0"", Depth = 3.25"
  • Optional Network Player Mounting Area: Width = 2.0", Height = 5.50", Depth = 5.625" (area is designed to accommodate an optional Sonos Port network player and cabling)

Loading accessories...

Customer Q&A

2 questions already asked

Q
What Bluetooth receiver will work with this amp to play streamed music off of a Bluetooth device? Such as a cell phone.
brad  Jul 03, 2023
1 answer
A
This Wet Sounds VS-1200-AMP 4-channel amp is a great solution when paired with the right streaming device, Brad. Wet Sounds was actually kind enough to loan us one of these amps paired with their outdoor speakers and we have been enjoying it, it absolutely performs! For a solid Bluetooth connection with longer range the Audioengine B1 in the first link below is an excellent call. If you want a little better streaming source sound quality and also would like to lean on Wi-fi for connection, we also have had great results using the Bluesound Node in the second link. Both fit inside the box with the amp, so either one you choose will work well! The Node especially as it has a 12v turn on port to turn the Wet Sounds amp on/off with use. https://www.crutchfield.com/p_772B1ADPT/Audioengine-B1.html https://www.crutchfield.com/p_813NODEBK/Bluesound-NODE-Black.html
bo  Jul 03, 2023 (Staff)
Q
Can this amp accommodate 6 of the wet sound venue speakers?
vinnie  Aug 09, 2021
1 answer
A
I can power 6 of their matching Venue speakers. I recommend contacting an advisor by calling 1-800-324-9695 to get a personal recommendation on the models to use
jason  Aug 10, 2021 (Staff)

Loading articles...

Compare the sound