About the Wet Sounds REVO 6-XWW

Product highlights:
- 2-way 6-1/2" marine speakers (pair)
- variable-color RGB LED backlight
- unlimited colors with RGB controller (not included)
- 8 grille styles to choose from
- composite cone woofer with Santoprene rubber surround
- 1" titanium tweeter
- rugged Nylas™ (nylon/fiberglass) frame
- durable rubber spider and magnet boot
- handles up to 100 watts RMS (200 watts peak)
- frequency response: 40-20,000 Hz
- sensitivity: 90 dB
- impedance: 4 ohms
- cutout diameter: 4.992"
- frame diameter: 6.877"
- top-mount depth: 3.375"
- warranty: 2 years
- MFR # REVO 6-XW-W
- Item # 867R6XWW
What's in the box:
Wet Sounds REVO 6-XWW owner's manual
If you need assistance accessing this owner's manual, please give us a call.- Two 2-way marine speakers with attached grilles
- 2 Rubber mounting gaskets
- Two 8" Waterproof 2-pin female SuperSeal speaker harnesses
- Two 8" Waterproof 4-pin female SuperSeal LED (RGB) harnesses
- Eight 1-1/4" Stainless steel Phillips head screws
- Owner's manual
- 2 Templates
More details on the Wet Sounds REVO 6-XWW

Features & specs
General | ||
---|---|---|
Speaker Size | 6 1/2 | |
Design | 2-way | |
Tweeter Design | 1" Dome | |
Tweeter Composition | Titanium | |
Woofer Composition | Injection-Molded Composite | |
Woofer Surround | Santoprene Rubber | |
Parts Warranty | 2 Years | |
Labor Warranty | 2 Years | |
Specifications | ||
Sensitivity |
90 dB at 1 watt | |
Frequency Response | 40 - 20k Hz | |
Max RMS Power Handling | 100 | |
Peak Power Handling (Watts) | 200 | |
Impedance (Ohms) | 4 | |
Top-mount Depth (Inches) | 3 3/8 | |
Bottom-mount Depth (Inches) | N/A | |
Cutout Diameter or Length (inches) | 5 | |
Bolt Circle | 6.157 |
Product Research
Features
Nylas Basket: The speaker frame is made of Nylas, a composite mix of Nylon and Fiberglass, providing strength and stability.
Rubber Spider: Durability is further improved by the Santoprene rubber spider Wet Sounds developed for their marine speakers.
Tweeters: The tweeters are mounted to the grilles, rather than to a pole piece, thus there is no chance of water leaking through the woofer cone.
LEDs: There are red, green, and blue LEDs in the back of the tweeter casing, to create a glow on the woofer cone. The LEDs can be powered individually, or in any combination you like. A 12 volt power supply is needed to turn the LEDs on and a 2-amp fuse should be added in-line (fuse not included). The LEDs can also be controlled using Wet Sounds' wireless RGB Music Controller remote (item number 867RFRGBMC, sold separately). A male 4-pin waterproof SuperSeal plug is on the wire connected to the LED housing, which connects to the included female SuperSeal harnesses.
Speaker Terminals: Similar to the LED wiring, a male 2-pin waterproof SuperSeal plug is on the signal input wire, which connects to the included female SuperSeal harnesses.
Grilles: The grilles are held in place by three screws, accessible under the mounting gasket, but the tweeter and LEDs are mounted to the grille, so it should not be removed.
Size: The REVO 6s fit into the openings for standard 6-1/2 and 6-3/4 speakers (standard car speaker sizes). The frame is bigger than a typical 6-1/2 and the screw hole pattern matches 6-3/4 speakers. Because the grille is not designed to be removed, they won't fit in most car applications.
Loading...
Loading accessories...
Customer Q&A
9 questions already asked
Loading...
Loading articles...
Just finished install of 4 of the 6.5 REVOs in my golf cart. Let's just say I have the loudest golf cart in my neighborhood. I don't know if that's necessarily a good thing, but we gonna rock it.
Jody Dale from Pearland, TX