Features

Wake Tower Speaker: The Wet Sounds Rev 8 Special Edition (SE) wake tower speakers are high-performance marine speakers designed for full sound in and around the boat and on the wake surfing range.

REV TEC Technology: The Rev 8 SE marine tower speakers use Wet Sounds' proprietary REV TEC technology. Unlike most conventional designs, REV TEC technology provides remarkable volume and amazing full range sound quality on axis and off axis at long distances. Extensive acoustic testing has confirmed these speakers ability to project volume at 80' and beyond without any loss of detail or information. Not only does the Revolution series achieve volume and sound quality at a minimum of 80', but with the REV TEC technology the rider can enjoy quality sound while riding outside the wake and being almost parallel to boat.

Two-Way Driver Design: The Rev 8 SE tower speakers utilize an 8" Kevlar-reinforced EFG cone woofer, with a polyurethane surround, and a coaxially-mounted 1" horn-loaded compression driver (HLCD) made of titanium for stellar performance in the marine environment.

• HLCD: The high frequency transducer is Wet Sounds' proprietary titanium HLCD (horn loaded compression driver). This driver was designed to provide a wide; horizontal trajectory that would not only produce sound in the directed path but will disperse sound off axis with little to no degradation. The HLCD is considered to be one of the most efficient transducer designs providing remarkable output while using less power. Wet Sounds unique (patent protected) design incorporates the HLCD mounted to the rear of the midbass driver. Wet Sounds Pro-Axial design allows the compression sound to travel through the voice coil former and out of the (patent protected) horn flare that is mounted coaxially. This provides phenomenal volume and accurate clarity.
• Kevlar Reinforced EFG Cone: Wet Sounds developed a proprietary cone material called EFG, which is an epoxy and fiberglass composite mix. Adding a reinforcement of Kevlar, the mid bass cones become more rigid without any added weight. This cone material incorporates characteristic values that are impermeable to damage from intermittent Ultra Violet exposure and minimal moisture exposure. Like the EFG cone material, the Polyurethane that is used for the surround will provide protection against Ultra Violet exposure and moisture. This will prevent deterioration of the surround yielding longer life and better reliability.

Crossover Network: A full passive crossover network delivers tuned frequencies to the drivers resulting in rich smooth sound.

Rugged Marine Enclosure: The Rev 8 SE marine tower speakers utilize a reinforced composite enclosure with stainless steel hardware to hold up against the harsh marine environment. Wet Sounds Suitz neoprene covers (sold separately) are available for storing or transporting the speakers when not in use.

X-Mount: The Wet Sounds Rev 8 SE marine tower speakers include X-Mount surface-mount brackets and hardware for mounting the speakers to a flat surface. The Rev 8 SE tower speakers are also available with Swivel or Fixed Clamp mounts.

Wiring Harness: The marine tower speakers feature a wiring harness integrated into the fixed mount clamp system, allowing for quick disconnect and reconnect from the matching 5" harness in the clamp base. The 14-gauge speaker wire is bare-ended.

Available Colors: The Wet Sounds Rev 8 SE marine tower speakers are available in matte White or matte Black.