Contact us
Close contact box
Connect ID #
956 329 757 4
Connect ID #
956 329 757 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

Wet Sounds Rev 10 B-FC 10" wakeboard tower speakers with fixed clamps (Black)

Item # 867RV10BFC

Wet Sounds Revolution Series speakers will let you enjoy full-range sound even when the boat's at full throttle.

Wet Sounds Revolution Series speakers will let you enjoy full-range sound even when the boat's at full throttle.

California customers:
Please click here for your Proposition 65 warning.

5 questions - 5 answers

Item # 867RV10BFC

In stock
$1,749.99 pair

Other options

About the Wet Sounds Rev 10 B-FC

Jon Paul

It's about to get seriously loud

Wet Sounds Revolution Series speakers will let you enjoy full-range sound even when the boat's at full throttle. Exclusive REV TEC technology gives these wakeboard tower speakers the power and precision needed to project clear, accurate sound over long distances.

It's about to get seriously loud

Wet Sounds Revolution Series speakers will let you enjoy full-range sound even when the boat's at full throttle. Exclusive REV TEC technology gives these wakeboard tower speakers the power and precision needed to project clear, accurate sound over long distances.

These thundering Rev 10 speakers are designed with high-performance boating in mind. The 10" woofer features a Kevlar-reinforced cone and polyurethane surround, while a rugged grille protects the titanium horn-loaded compression drivers from damage. The reinforced composite enclosure looks great and stands up to wind and weather.

Your Rev 10 speakers will handle up to 300 watts RMS, so you can expect some impressive sound levels. Not only does the sound go a long way with these speakers, it also goes where it's needed. Everyone on board will keep rockin' over wind, waves, and engine noise, while skier and waterboarders will able to hear the music even when outside the wake and almost parallel to the boat.

Big, tough, and ready for anything

These Wet Sounds Revolution speakers features rugged, durable hardware, including fixed stainless steel clamps that will fit a variety of tower sizes. Even if you don't have a wakeboard tower, the clamps can be used on most any suitable tubes or railings on your boat. They're ideal for your other recreational rides, too — you can mount these Wet Sounds speakers on off-road vehicles, golf carts, ATVs, UTVs, and RVs.


Product highlights:

  • two black speaker pods
  • sleek design with fixed stainless steel mounting brackets
  • 10" Kevlar-reinforced woofers with polyurethane surround
  • titanium horn-loaded compression drivers
  • reinforced composite enclosures
  • power handling: 20-300 watts RMS (600 watts peak power)
  • frequency response: 20-20,000 Hz
  • speaker sensitivity: 92 dB
  • warranty: 2 years
  • MFR # Rev 10 B-FC SS V2

What's in the box:

  • 2 Marine tower speakers
  • Mounting bracket w/ built-in connector
  • Mounting bracket
  • 2 Rubber covers
  • Two M7 x 60mm bolts
  • Two M7 x 45mm bolts
  • Four M7 x 30mm bolts
  • Manual
  • Wet Sound Logo Sticker

Customer reviews for Wet Sounds Rev 10 B-FC

Loading reviews...

Average review:

5.0 out of 5 stars
5 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on

This review was collected as part of a promotion



Crutchfield response
Customer provided image, click to load a larger version.
<< >>

More details on the Wet Sounds Rev 10 B-FC

Russ B.

Features & specs

Tweeter Composition Titanium
Woofer Composition Epoxy Fiber Glass
Woofer Surround Polyurethane
Parts Warranty 2 Years
Labor Warranty 2 Years
Sensitivity 92 dB at 1 watt
Style Wakeboard tower
Frequency Response 20-20000
Max RMS Power Handling 300
Peak Power Handling (Watts) 600
Impedance (Ohms) 4

Product Research


Wake Tower Speaker: The Wet Sounds Rev 10 is a high-performance marine tower speaker designed for full sound in and around the boat and wake surfing range. Even though these tower speakers have been designed for the marine environment, they should not be sprayed directly with any liquid base substance.

REV TEC Technology: The Rev 10 marine tower speaker uses Wet Sounds' proprietary REV TEC technology. Unlike most conventional designs, REV TEC technology provides remarkable volume and amazing full range sound quality on axis and off axis at long distances. Extensive acoustic testing has confirmed these speakers ability to project volume at 100' and beyond without any loss of detail or information. Not only does the Revolution series achieve volume and sound quality at a minimum of 100', but with the REV TEC technology the rider can enjoy quality sound while riding outside the wake and being almost parallel to boat.

Two-Way Driver Design: The Rev 10 tower speaker utilizes an 10" Kevlar reinforced EFG cone woofer with a polyurethane surround and a coaxially-mounted 1" horn-loaded compression driver (HLCD) made of titanium for stellar performance in a marine environment.

  • HLCD: The high frequency transducer is Wet Sounds' proprietary titanium HLCD (horn loaded compression driver). This driver was designed to provide a wide; horizontal trajectory that would not only produce sound in the directed path but will disperse sound off axis with little to no degradation. The HLCD is considered to be one of the most efficient transducer designs providing remarkable output while using less power. Wet Sounds unique (patent protected) design incorporates the HLCD mounted to the rear of the midbass driver. Wet Sounds Pro-Axial design allows the compression sound to travel through the voice coil former and out of the (patent protected) horn flare that is mounted coaxially. This provides phenomenal volume and accurate clarity.
  • Kevlar Reinforced EFG Cone: Wet Sounds developed a proprietary cone material called EFG, which is an epoxy and fiberglass composite mix. Adding a reinforcement of Kevlar, the mid bass cones become more rigid without any added weight. This cone material incorporates characteristic values that are impermeable to damage from intermittent Ultra Violet exposure and minimal moisture exposure. Like the EFG cone material, the Polyurethane that is used for the surround will provide protection against Ultra Violet exposure and moisture. This will prevent deterioration of the surround yielding longer life and better reliability.

Crossover Network: A full passive crossover network delivers tuned frequencies to the drivers resulting in rich smooth sound.

Rugged Marine Enclosure: The Rev 10 marine tower speakers utilize a reinforced composite enclosure with stainless steel hardware to hold up against the harsh marine environment. Neoprene covers (sold separately) are available for storing or transporting the speakers when not in use.

Fixed Mounting Clamp: The Wet Sounds Rev 10 marine tower speakers provide fixed mounting clamps and hardware. The fixed bracket system allows for quick removal and reattachment of speaker to a 1.875"-3" (diameter) tube. Optional fixed and swivel mini-brackets (sold separately) are available for 1"-1.875" (diameter) tube.

Wiring Harness: The marine tower speaker's wiring harness is integrated into the fixed mount clamp system and allows for quick disconnect and reconnect. The Red and Black wires are positive and negative for connecting the speaker to your marine amplifier.

Optional LED Light Rings: Optional RGB and Blue LED light rings (sold separately) are available which can be installed inside the grille of the tower speaker. In addition to the LED light ring, you will also need the Wet Sounds swivel mini-bracket and TC3-S 6-pin connector harnesses (both sold separately), which replace the included fixed bracket and 2-pin connector harness.

Available Colors: The Wet Sounds Rev 10 marine tower speakers are available in Gloss White or Gloss Black with UV inhibitors.

Loading accessories...

Customer Q&A

5 questions already asked

What amp should I get with these speakers?
imjvc10  Feb 07, 2018
1 answer
Thanks for your question. For information on selecting the best amp for your speakers I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system.
kristina  Feb 10, 2018 (Staff)
Are these 2 ohm stable?
charles  Aug 17, 2021
1 answer
Each of these speakers are 4 ohms. Their impedance cannot be changed to any other ohm.
jason  Aug 21, 2021 (Staff)
Is this speaker a version 1 or 2?
noah  Aug 07, 2021
1 answer
These are the V2 models; not the original
jason  Aug 09, 2021 (Staff)
What are the dimensions of the speakers?
shawn  Mar 25, 2017
1 answer
Thanks for your question. I have listed the dimensions below. Hope this helps. Width = 10.625" Height = 11.5625" Depth = 13.0625"
kenneth  Mar 25, 2017 (Staff)

Loading articles...

Compare the sound