About the Wet Sounds VS-8 PRO
A versatile, weather-resistant outdoor speaker
A versatile, weather-resistant outdoor speaker
The Wet Sounds VS-8 PRO speaker can add some nice low end to your outdoor sound system. It features a horn loaded compression driver, a composite 8" mid-bass woofer, and a pair of opposing aluminum passive radiators to reinforce the bass frequencies.
This weatherproof speaker is rated for 200 watts of power and features a built-in 70-volt tap for use in a commercial distributed audio system. It is perfectly matched to the weather-resistant Wet Sounds VS-1200-AMP 4-channel amplifier, which is designed to run multiple pairs of VS Series speakers and/or a subwoofer. The included multi-angle bracket gives you flexible mounting options.
Product highlights:
- weather-resistant speaker with horn loaded compression driver and reinforced 8" composite mid-bass driver
- opposing dual aluminum passive radiators deliver extended bass response
- power handling: 200 watts RMS (400 peak)
- nominal impedance: 4 ohms
- 70-volt tap settings: 40, 80, 120 and 160 watts
- frequency response: 20-20,000 Hz
- sensitivity: 92 dB
- adjustable bracket offers flexible mounting options
Dimensions and warranty:
- 15"W x 10-3/16"H x 11-7/8"D
- warranty: 2 years
- MFR # VS-8 PRO-B
What's in the box:
- 8" 70V Outdoor speaker (black) w/attached 16" bare-ended speaker wire
- Mounting bracket
- Four 1/2" screws
- Owner's manual
Reviews (2)
Customer reviews for Wet Sounds VS-8 PRO
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Wet Sounds VS-8 PRO
Features & specs
| Type | Surface Mount | |
| Bluetooth | No | |
| Enclosure | Sealed | |
| Tweeter Type | Compression horn | |
| Tweeter Size (inches) | Not given | |
| Midrange Size (inches) | N/A | |
| Woofer Size (inches) | 8 | |
| Woofer Composition | Not given | |
| Woofer Surround | Not given | |
| Power Range (watts) | 200 | |
| Sensitivity | 92 dB | |
| Impedance (ohms) | 4 | |
| Frequency Response | 20Hz-20k Hz | |
| Connector Type | Bare wire | |
| Height (inches) | 10-3/16 | |
| Width (inches) | 14-15/16 | |
| Depth (inches) | 12 | |
| Weight (pounds) | 18.0 | |
| Wall-mountable | Yes | |
| Bracket Included | Adjustable bracket | |
| Parts Warranty | 2 Years | |
| Labor Warranty | 2 Years | |
Product Research
Features
Overview: The Wet Sounds VS-8 Pro enclosed speaker is designed for surface-mounting in outdoor and landscape installations, and can be used in 70V or 4Ω systems.
Drivers: The VS-8 Pro features an 8" mid-bass driver with a coaxially mounted Horn Loaded Compression Driver (HLCD). The all-weather speaker also features two 7" x 5" aluminum passive radiators that can deliver enhanced low bass.
70V/4Ω Use: The VS-8 Pro includes a built-in transformer for use in 70V systems, as well as a 4Ω bypass setting for a low-impedance connection. A recessed tap dial in the rear panel provides tap settings for 40W, 80W, 120W, and 160W. In the 4Ω setting, the outdoor speaker can handle up to 200W RMS (400W peak). A screw-down cover helps protect the tap dial from the elements.
Mounting: A surface-mount U-bracket is included, allowing the outdoor speaker to be mounted to a wall or under an overhang. The U-bracket allows the speaker to be tilted up to 90˚ for optimal aiming. A steel eyelet in the rear panel lets you attach an optional safety cable or strap (not included).
Wiring: The VS-8 Pro includes an attached 16" section of bare-ended 14 AWG speaker wire, for connecting to a 4Ω-compatible or 70V amplifier.
Loading accessories...
Customer Q&A
3 questions already asked
Loading articles...
Have been looking for speakers for my top pull deck that had some base to them. These speakers sound amazing on my system!
Grady from Liberty Hill, TX