About the Focusrite Scarlett 2i2 Studio (3rd Generation)
Recording on your computer, made easy
Recording on your computer, made easy
Looking to lay down some tunes on your PC or Mac®? Here's a convenient bundle from Focusrite that gives you just about everything you'll need. It includes the third-generation Scarlett 2i2 audio interface, which features high-quality microphone preamps and combination inputs that let you directly plug in instruments like guitars and basses. You also get a studio condenser microphone that's great for capturing detailed vocal tracks, a mic cable, and a set of Focusrite's closed-back headphones for monitoring. (For folks just getting started, we suggest picking up a mic stand.)
An improved third-generation Scarlett interface
The third-gen 2i2 features two redesigned microphone preamps, each with a selectable "Air" mode that simulates the classic Focusrite mic preamps used in AIR Studios for better top-end detail and spaciousness. Like the previous generation, the latest Scarlett models offer low latency, which means you can record and monitor in real time using software effects, plug-ins, and virtual instruments from your DAW — instead of relying on monitoring dry input signals. That's good news if you like to play around with virtual instruments and effects for musical inspiration and capture ideas as you go. (However, when direct monitoring is the ticket, you can use the handy front-panel button to engage it.)
Bundled with Ableton Live Lite
The Scarlett 2i2 is designed to work flawlessly with all major DAW software, but if you're just getting started, you'll appreciate that this interface comes bundled with Ableton Live Lite. You also get newly designed Focusrite Control software for intuitive control of your mixing and monitoring setups. The bundled software package also includes the Focusrite Red Plug-In Suite, Softube's Time and Tone reverb and delay plug-ins, and more.
Product highlights:
- bundle includes:
- Scarlett 2i2 audio interface (third generation)
- Scarlett series HP60 MkIII closed-back headphones
- Scarlett series CM25 MkIII condenser microphone and mic cable
- warranty: 2 years
Scarlett 2i2 interface details:
- computer audio interface with 2 input and 2 output channels
- 2 newly redesigned Focusrite mic preamps
- super-low latency lets you record and monitor with software effects in real time
- bundled software includes Ableton Live Lite, Softube Time and Tone Bundle, Focusrite Red Plug-in Suite, and more
- supports sample rates up to 192kHz
- powered by your computer via USB
- 2 front-panel XLR/TRS switchable mic/line/instrument inputs for use with microphones, electric guitars and basses, keyboards and drum machines
- two 1/4" balanced analog outputs for connecting powered studio monitors
- 1/4" headphone output with volume control
- USB Type-C port for connection to a computer
- USB-C to USB-A adapter cable included; USB-C to USB-C cable available separately
- illuminated halos around gain knobs indicate signal and clipping
- 6-15/16"W x 1-7/8"H x 3-15/16"D
- MFR # SCARLETT 2I2 STUDIO 3RD GEN
What's in the box:
Focusrite Scarlett 2i2 Studio (3rd Generation) owner's manual
- Scarlett 2i2 audio interface
- CM25 MkIII condenser microphone
- HP60 MkIII headphones w/ 115" cord (attached threaded 1/8"-1/4" adapter)
- 10' XLR cable
- 39" USB Cable (Type-A to type-C / 2.0)
- Microphone stand-adapter (attached 5/8"-3/8" adapter)
- Safety instructions
Customer reviews for Focusrite Scarlett 2i2 Studio (3rd Generation)
Loading...
Loading reviews...
Average review:
4.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Focusrite Scarlett 2i2 Studio (3rd Generation)
Product Research
Features
Audio Interface
Microphone
Headphones
Specifications
Features
Overview: The Focusrite Scarlett 2i2 Studio is a 2 input/2 output audio interface that's part of the Third Generation of Scarlett series professional computer audio interfaces. The audio interface features 2 XLR/1/4" combo inputs, with Scarlett mic preamps that can also accept instrument-level signals, along with 2 rear-panel 1/4" line outputs. In addition to the audio interface, the Scarlett 2i2 Studio package also includes a CM25 MkIII studio-grade condenser microphone, a pair of HP60 MkIII professional headphones, a 10' XLR cable, and a plethora of recording software, sounds, and plug-ins to quickly get you started making music.
Audio Interface
24-Bit/192kHz DAC: The Scarlett 2i2 employs a high-definition 24-bit/192kHz analog-to-digital converter for exceptional sound quality and recording with up to 111 dB dynamic range. The default sample rate of the 2i2 is 48kHz.
Scarlett Preamps: The Focusrite Scarlett 2i2 is equipped with Focusrite's 3rd generation of microphone preamplifiers for use with all types of microphones. The net result of the Scarlett preamp design is high headroom, low noise, wide dynamic range, extended frequency response, and most importantly, musicality and transparency, with smooth highs, solid deep lows, and everything in between.
- Air: Focusrite's latest 3rd gen Scarlett mic preamps feature Air circuitry, derived from Focusrite's legendary ISA preamps. Activating Air can make guitars and vocals sound instantly brighter and more spacious, with a lustrous sheen that can make a real difference in your mix.
Focusrite Control: All setup and configuration of the Scarlett 2i2 is done through the Focusrite Control software, available for Windows and Mac, found here. The Focusrite Control software allows detailed routing of all inputs and outputs with adjustable level controls for each. Many of the front-panel controls can also be selected for adjustment and offer more detailed options in the software than is available from the front panel.
Audio Inputs & Outputs: The Scarlett 2i2 includes two front-panel inputs along with 2 rear-panel outputs.
- Front Microphone/Instrument/Line Inputs: Input channels 1 & 2 feature balanced XLR/1/4" combo jacks that can accept either microphone-, line-, or instrument-level signals. Preamp gain is automatically set to Mic or Line depending on whether an XLR or 1/4" plug is inserted into the combo jack. A front-panel switch allows selection of Instrument or Line. Instrument can also be selected from the Input Settings menu in the Focusrite Control software.
- Rear Line Outputs:
- Line 1 & 2: Two balanced 1/4" outputs, accepting either TS or TRS plugs. The audio level from these outputs can be adjusted with the front-panel Monitor control, with a maximum output level of +10dBu.
- Headphone: A 1/4" stereo headphone output with corresponding level control.
USB 2.0 Port: The rear-panel USB port (type-C, 2.0) provides the connection to your computer using the provided USB cable. The interface is bus-powered via this connection and does not require an external power supply.
Controls: The Focusrite 2i2 provides the following front-panel controls.
- Monitor: The Monitor knob adjusts the audio output level from Outputs 1 & 2 on the rear panel.
- Gain 1 & 2: These adjust the preamp gain for audio signals on Inputs 1 &
2 respectively. Both controls have concentric tri-colored LED rings to
display signal level:
- Green: Signal level is at least -24dBFS (i.e., signal is present)
- Amber: The ring turns amber at -6dBFS, indicating the signal is close to clipping.
- Red: Lights when the signal hits 0 dBFS (digital clipping)
- Phones: The Phones knob controls the volume of the headphone output on the front of the unit.
- 48V: This activates +48V phantom power to both XLR/1/4" combo jacks.
- INST (x2): Switches the corresponding input between Line and Instrument, changing both the gain and input impedance for each. INST can also be selected from the Focusrite Control software.
- Air (x2): These two switches, one for each input, can be used to activate the AIR feature for that input. AIR modifies the frequency response of the input stage to model the classic, transformer-based Focusrite ISA microphone preamps. This setting can also be selected from the Focusrite Control software.
- Direct Monitor: This switch determines how input sources are monitored, stepping between 3 Direct Monitoring modes: Off, Mono, and Stereo. When set to Off, input monitoring is done via the DAW; in Mono or Stereo, monitoring is taken directly from the preamp inputs, eliminating and latency effect. Symbols for Mono and Stereo will light green to indicate either mode.
Included Software Bundle: The Focusrite Scarlett 2i2 comes with a powerful software bundle that provides everything you need to record, mix, and master your next project. This software package includes:
- Ableton Live Lite: The Focusrite Scarlett 2i2 includes
Ableton Live Lite, the industry-leading music-making software. Key features
include:
- Up to 16 audio and MIDI tracks.
- 4 Software Instruments.
- Over 1500 sounds (5+ GB)
- 21 Audio effects
- 8 MIDI effects
- VST2, VST3, and Audio Unit support
- Hitmaker Expansion: Features exclusive content from legendary Auto-Tune creators Antares, as well as Brainworx, Softube, XLN Audio, Relab, and more.
- Focusrite Plugin Collective: This lets you receive free versions of the most innovative software as well as discounts.
- Splice Sounds: A three month subscription to Splice Sounds gives you access to millions of high-quality, royalty-free sounds and loops.
OS Requirements: Below are the minimum operating system requirements for the Focusrite Scarlett 2i2 audio interface.
- Windows 7, 8, and 10
- Mac® OS X 10.12 Sierra, 10.13 High Sierra, 10.14 Mojave, 10.15 Catalina, 11 Big Sur
Supported Sample Rates: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
Microphone
CM25 MkIII: The included CM25 MkIII microphone is a studio-quality condenser microphone which is ideal for recording vocals and most acoustic instruments. It features a cardioid pickup pattern, allowing it to pick up sounds in front and on the sides of it, while rejecting sounds from behind it. The CM25 MkIII is a condenser type microphone, requiring phantom power to operate. The Scarlett 2i2 Studio package includes an adjustable microphone stand-adapter that comes with a pre-attached 5/8" to 3/8" thread-adapter for attaching to most microphone stands (not included).
Headphones
HP60 MkIII: The Scarlett 2i2 Studio package includes a pair of high-quality professional HP60 MkIII headphones. Featuring an adjustable headband, the HP60 MkIII's are lightweight, durable, and designed to remain comfortable, even when wearing them for long periods of time. The studio-grade headphones include a low-noise, oxygen-free copper cable, fitted with an 1/8" TRS (stereo) jack. An 1/8" - 1/4" adapter is included.
Specifications
Inputs:
- Front: 2 x XLR / 1/4" combo jacks (balanced, Mic/Line/Instrument)
- Microphone Inputs 1 & 2:
- Frequency Response: 20Hz to 20kHz (±0.1dB)
- Dynamic Range: 111 dB (A-weighted)
- Gain Range: 56dB
- THD+N: <0.0012% (minimum gain, -1dBFS input with 22Hz/22kHz bandpass filter)
- Noise EIN: -128dBu (A-weighted)
- Maximum Input Level: +9 dBu
- Input Impedance: 3kΩ
- Line Inputs 1 & 2:
- Frequency Response: 20Hz to 20kHz (±0.1dB)
- Dynamic Range: 110.5 dB (A-weighted)
- THD+N: <0.002% (minimum gain, -1 dBFS input with 22Hz/22kHz bandpass filter)
- Gain Range: 56dB
- Maximum Input Level: +22 dBu
- Input Impedance: 60kΩ
- Instrument Inputs 1 & 2:
- Frequency Response: 20Hz to 20kHz (±0.1dB)
- Dynamic Range: 110 dB (A-weighted)
- THD+N: <0.003% (minimum gain, -1dBFS input with 22Hz/22kHz bandpass filter)
- Gain Range: 56dB
- Maximum Input Level: +12.5dBu
- Input Impedance: 1.5MΩ
Line Outputs:
- Type: 2 x 1/4" TRS (balanced)
- Dynamic Range: 108.5 dB (A-weighted)
- Maximum Output Level (0 dBFS): +15.5 dBu (balanced)
- THD+N: <0.002% (minimum gain, -1dBFS input with 22Hz/22kHz bandpass filter)
- Output Impedance: 430Ω
Headphone Output:
- Type: 1 x 1/4" stereo
- Dynamic Range: 104 dB (A-weighted)
- Maximum Output Level: 7 dBu
- THD+N: <0.002% (measured at +6dBu with 22Hz/22kHz bandpass filter)
- Output Impedance: <1Ω
Other I/O:
- USB: 1 x USB Type-C, 2.0
Dimensions: Width = 6.875", Height = 1.875", Depth = 6.0"
Weight: 1.04 lbs.
CM25 MkIII Microphone:
- Polar Pattern: Cardioid
- Capsule: Condenser
- Sensitivity: -36 dB ±2dB (0dB = 1 V/Pa @ 1kHz)
- Frequency Response: 20Hz - 20kHz
- Impedance: 200Ω ±30% (@ 1kHz)
- Recommended Load Impedance: >10kΩ
- Equivalent Noise Level: 16dBA (A-weighted IEC651)
- S/N Ratio: 74dB
- Power Requirement: 48V phantom power
- Current: 3mA
- Dimensions: Diameter = 1.80", Length = 6.28"
HP60 MkIII Headphones:
- Type: Closed-back
- Driver Diameter: 50mm (1.97")
- Impedance: 32Ω
- Sensitivity: 98dB ±3dB
- Frequency Response: 20Hz - 20kHz
- Maximum Power Rating: 1.2W
- Cable Length: 115"
- Connector: 1/8" Stereo (includes 1/8"-1/4" adapter)
- Weight: 0.64 lbs.
The Focusrite Scarlett 2i2 Studio (3rd Generation) replaces these items
Focusrite Scarlett 2i2 Studio (Second Generation)
- 2-input/2-output computer audio interface with 2 mic preamps
- large diaphragm condenser microphone and mic cable
- closed-back headphones for monitoring
Loading...
Loading accessories...
Customer Q&A
1 question already asked
Loading...
Loading articles...
Very happy with my purchase so far.
Alejandro Go from El Paso, TX