About the Audiofrog GS25
Build an Audiofrog system
Build an Audiofrog system
The price tag sets Audiofrog's speakers apart from the run-of-the-mill, but it also buys you astounding car audio. Audiofrog designed the GS25 2-1/2" midrange speakers to deliver the details in a custom component system. A responsive polypropylene cone provides high internal damping for smoother frequency response, and Audiofrog uses a 1" copper voice coil to enhance power handling.
What a speaker
You can use these versatile speakers with active crossovers (not included) in a 2- or 3-way system, or as standalone center speakers in a multi-channel setup. The beauty of Audiofrog's a la carte approach is that it imposes no limits on your ultimate car audio vision.
Audiofrog was founded by experienced installers, who know all the pitfalls and shortcuts of custom installations. Check out our full lineup of Audiofrog components, and build the system you've always dreamed of.
- 2-1/2" polypropylene speakers (pair)
- for use with active crossovers
- power handling: 15-75 watts RMS (150 watts peak power)
- frequency response: 200-20,000 Hz
- impedance: 4 ohms
- sensitivity: 87 dB
- flush-mount depth: 1-9/16"
- warranty: 1 year
- MFR # GS25
What's in the box:
- 2 Midrange drivers
- 2 Adhesive backed foam gaskets
- Eight 5/8" Screws
- 8 Adhesive backed rubber bushings
- Instruction manual
Customer reviews for Audiofrog GS25
Average review:4.5 out of 5 stars
Thanks for submitting your review
More details on the Audiofrog GS25
Features & specs
|Speaker Size||2 1/2|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|Sensitivity (1W at 1 meter)||N/A|
|Sensitivity at 2.83 volts||87|
|Frequency Response||200 - 20k Hz|
|Minimum RMS Wattage||15|
|Maximum RMS Wattage||70|
|Peak Power Handling (Watts)||150|
|Top-mount Depth (Inches)||1 9/16|
|Bottom-mount Depth (Inches)||1 11/16|
|Cutout Diameter or Length (inches)||2 3/8|
|Mounting Height (Inches)||0.16|
Overview: The GS25 is designed as a drop-in upgrade for many GM, Toyota and Mercedes Benz vehicles. The basket has break off mounting tabs so you can remove the ones not used in your installation, or all the tabs can be removed and the speaker mounted as a universal 2½". Please enter your vehicle information to confirm fit.
Crossover: Audiofrog recommends a high pass crossover set no lower than 200 Hz. The minimum recommended slope is 12 dB/octave.
Power Handling: Two RMS power figures are listed in the manual; 70 watts RMS in the technical specifications section and 15-75 watts RMS in the recommendations section.
4 questions already asked