About the Audiofrog GS40

Highlights:
- 4" polypropylene speakers (pair)
- for use in systems with active crossovers
- no crossovers included
- power handling: 15-70 watts RMS (200 watts peak power)
- frequency response: 90-12,000 Hz
- impedance: 4 ohms
- sensitivity: 88 dB
- removable grille mesh and trim ring can be painted
- flush-mount depth: 1.917"
- cutout diameter: 3.673
- warranty: 1 year
- MFR # GS40
- Item # 898GS40
- California customers: Please click here for your Proposition 65 WARNING.
What's in the box:
- 2 Midrange drivers
- 2 Grilles
- 2 Grille mounting rings
- Eight 1-1/8" Self-tapping screws (3mm Allen head)
- 3mm Allen head bit
- Instruction manual
More details on the Audiofrog GS40

Features & specs
General | ||
---|---|---|
Speaker Size | 4 | |
Driver Design | 1-way | |
Woofer Design | --- | |
Woofer Material | --- | |
Woofer Surround | NBR | |
Midrange Design | Parabolic Cone | |
Midrange Material | Polypropylene | |
Tweeter Design | --- | |
Tweeter Material | --- | |
Super Tweeter Design | --- | |
Super Tweeter Material | --- | |
Impedance (Ohms) | 4 | |
Weather-resistant | No | |
Grilles Included | Black metal mesh, Black/Silver plastic frame | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | N/A | |
Sensitivity at 2.83 volts | 88 | |
Frequency Response | 90 - 12k Hz | |
Maximum RMS Wattage | 70 | |
Peak Power Handling (Watts) | 200 | |
Top-mount Depth (Inches) | 1 15/16 | |
Bottom-mount Depth (Inches) | 2 1/8 | |
Cutout Diameter or Length (inches) | 3 11/16 | |
Mounting Height (Inches) | 0.295 | |
Frame Width | 4.32 | |
Frame Length | 4.32 |
Product Research
Features
Durability: The Nitrile-Butadiene Rubber (NBR) surround is resistant to ultraviolet rays, temperature extremes, and humidity to add to the speaker's reliability and longevity.
Multi Component Systems: The GS40s are designed to mate with the GS10 tweeters (item number 898GS10, sold separately) using the GS410C passive crossovers (item number 898GS410C, sold separately). They can also be used in an active system with (or without) the GS60 woofers (item number 898GS60, sold separately) and the GS10 tweeters using an electronic crossover.
Note: Audiofrog recommends a low pass crossover set no higher than 3.5 kHz. The minimum recommended slope is 12 dB/octave.
Power Handling: Audiofrog lists two RMS power figures in the manual; 70 watts RMS in the technical specifications section and 15-75 watts RMS in the recommendations section.
Loading...
Loading accessories...
Customer Q&A
3 questions already asked
Loading...
Loading articles...
Beautiful midrange sound, delivers a surprising amount of punch, brings the detail in drums to life. Fleetwood Mac's "Tusk" sounds incredible.
Leroy from West Haven, UT