About the Audio-Technica ATM650
Get clean, accurate sound from up close
Get clean, accurate sound from up close
The Audio-Technica ATM650 features a multi-stage flat grille that lets you place the mic very close to your sound source. The mic's frequency response is tailored for clear sound reproduction from guitar cabinets, snare drums, and other percussion instruments.
The ATM650's hypercardioid polar pattern tightly focuses on the sound you want, rejecting surrounding noise. Rugged all-metal construction helps ensure the ATM650 will give you years of reliable service.
Product highlights:
General Features:
- stage mic for guitar amps, snare drum, and percussion
- dynamic microphone
- hypercardioid polar pattern for tightly focused sound pickup
- rugged, all-metal design
Specifications:
- frequency response: 80-17,000 Hz
- sensitivity: -56 dBV/Pa
- impedance: 300 ohms
- 6-1/2"L x 1-1/2"D
- weight: 9.8 oz.
- male XLR connector
Included Accessories:
- isolation clamp
- threaded stand adapter
- storage bag
Other Info:
- warranty: 2 years
- MFR # ATM-650
What's in the box:
Audio-Technica ATM650 owner's manual
- Hypercardioid dynamic instrument microphone
- AT8470 Quiet-Flex stand clamp (5/8"-27 thread)
- 5/8"-27-to-3/8"-16 thread adapter
- Padded zippered storage pouch
- Instructions
- Purchase Registration card
- Disposal statement
Reviews (1)
Customer reviews for Audio-Technica ATM650
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Audio-Technica ATM650
Features & specs
| General | ||
|---|---|---|
| Application | For live & studio use | |
| Type | Dynamic | |
| Polar Pattern | Hypercardioid | |
| Phantom Power | N | |
| On/Off Switch | No | |
| Connector | XLR | |
| Specs | ||
| Frequency response | 80-17k | |
| Sensitivity | -56dB/Pa | |
| Max SPL | N/A | |
| Diameter | 1.54 | |
| Length | 6.47 | |
| Weight | 9.8 oz. | |
| Parts Warranty | 2 Years | |
| Labor Warranty | 2 Years | |
Product Research
Features
Overview: The Audio-Technica ATM650 Hypercardioid Dynamic microphone is designed to pickup musical instruments for recording and live performances. Its all-metal design and construction can withstand the rigors of live performance for years. The mic comes with a Quiet-Flex stand clamp, a thread adapter, and a padded zippered storage pouch.
Polar Pattern: The ATM650 has a hypercardioid polar pattern that is more sensitive to sounds directly in front of the element. This pattern helps control feedback, and reduces the pickup of unwanted sounds from the sides and back.
Flat Grille: The microphone has multi-stage flat grille design. This allows you to place the microphone as close as possible to the sound source, especially guitar cabinets and musical instruments.
Dual Wall Construction: The ATM650 features a special dual-wall floating construction to reduce handling noise. It also assures you get the same uniform performance from all of the ATM650s on stage.
Stand Mounting: Included with the ATM650 is an AT8470 Quiet-Flex stand clamp, which tilts approximately 140°. The clamp has a metal threaded insert for attaching to microphone stands with 5/8"-27 threads. The included soft plastic adapter screws into the insert, so you can mount it to stands with 3/8"-16 threads.
Specifications:
- Frequency Response: 80Hz - 17kHz
- Open Circuit Sensitivity: -56dB (1.5mV) re 1V at 1 Pa
- Impedance: 300 ohms
- Output Connection: XLR male
- Dimensions: 1.54" diameter, 6.47" length
- Weight: 9.8 ounces
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
