Solidsteel HF-3

Features

Solidsteel Philosophy: Solidsteel's philosophy is that there should be no compromise in the build quality or benefits to sonic performance, and that the products should reflect the Italian "style" of design with the use of excellent materials, clean lines, well-considered utilization of space, and attention to detail.

Hyperspike HF Series: This is the Hyperspike Vibration Free System, designed by Solidsteel. The structural concept of the Hyperspike HF Series is functional, simple in design and effective. It consists of MDF shelves that are very solid mechanically and acoustically, finished by a special black rubberized paint with sound absorbing and non-scratch properties. The Hyperspke HF series audio racks consist of a quadrangular design, noticeably rounded without corners forming a smooth, graceful profile that gives continuity to its aesthetic and practical features.

3-Shelf Audio Rack: The Solidsteel HF-3 audio rack features 3 fixed shelves. The overall height of the tack, and the distance between each shelf, has been carefully calculated to achieve an optimum balance of acoustics and aesthetics.

• Top Shelf: The top shelf measures 25.4375" (w) x 30.5" (h) x 22.125" (d), and can support up to 175 lbs.
• Middle Shelf: The middle shelf measures 21.125" (w) x 8.125" (h) x 22.125" (d), and can support up to 175 lbs.
• Bottom Shelf: The bottom shelf measures 21.125" (w) x 12" (h) x 22.125" (d), and can support up to 175 lbs.

4-Pillar Design: The four pillar design is geometrically positioned to give maximum support and minimum physical contact with the surrounding environment. The rack stems are made of high quality solid steel rods, polished by a state of the art process giving a smooth and shimmering finish. In order to provide the necessary modular structure, the frames comprise a central segment of variable length to meet diverse requirements, to which are attached the other elements that make up the rest of the support mechanism. Adding to the technical composition are securing screws, insulating spikes (very strong, beautifully welded, adjustable, strong locking with a clamping screw) and decoupling pads, also made of solid steel. Amongst the elements to be assembled are rubber o-rings, similar to a piston ring with the purpose of improving the fit while reducing the transmission of mechanical energy.

Polished Steel & MDF Construction: The 3-shelf audio rack features a polished steel, 4 pillar structure with shelves made of  1.2" MDF (medium density fiberboard). The benefits of MDF include a much higher damping factor and superior rigidity over time. The MDF is covered by a non-resonant, scratch-resistant black rubberized paint or high-quality wood veneer.

Decoupling Spikes: To minimize resonances, each shelf of the HF-3 is supported on, and therefore isolated from, the frame by decoupling spikes which are positioned to precisely discharge unwanted energies into the chassis. All spurious mechanical energies are then discharged into the ground through the decoupling spike feet at the point where the rack legs contact the floor.