About the ELAC LS20
A sturdy foundation for ELAC Reference speakers
A sturdy foundation for ELAC Reference speakers
These custom-built ELAC stands are designed to provide a stable foundation for ELAC's Debut Reference DBR62 and Uni-Fi Reference UBR62 stand-mount speakers. They place the speakers at the ideal listening height to help you get the best sound quality.
The stands feature solid steel top and bottom plates. The aluminum center columns can be filled with sand, shot, etc. for added mass and vibration damping. Carpet spikes are included for additional stability on a rug or thick carpet, and vibration-isolating rubber feet are included for use with hard floors.
Product highlights:
- pair of custom-designed speaker stands for ELAC Reference speakers
- provides an attractive, rock-solid foundation for your speakers
- each stand supports up to 25 lbs.
- 6" x 8-1/2" steel top plate
- aluminum center columns can be filled with sand, shot, etc. for added stability and vibration damping
- "H"-shaped steel base plate
- floor spikes and rubber feet included for additional stability
Dimensions and warranty:
- 10-11/16"W x 23"H x 9-11/16"D (with spikes)
- weight: 6.6 lbs. (each)
- warranty: 5 years
- MFR # LS20W
What's in the box:
- 4 Upright posts
- 2 Top-plates
- 2 Bases
- 8 Spikes
- 8 Rubber feet
- 8 Rubber bumpers
- 4 Counter-sunk screws
- 8 Pan-head screws
- Hex-key
- Assembly Instructions
Featured video:
Reviews (6)
Customer reviews for ELAC LS20
Loading reviews...
Average review:
4.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the ELAC LS20
Features & specs
| Number of Stands Included | 2 | |
| Stand Type | Floor | |
| Compatibility | Elac Uni-Fi Rerence | |
| Height | 23 | |
| Weight Capacity | 25 | |
| Base Dimensions | 9.6875 x 10.6875 | |
| Top Plate Dimensions | 6.0 x 8.5 | |
| Materials | Aluminum, Steel | |
| Adjustable | No | |
| Wire Management | No | |
| Fillable | Yes | |
Product Research
Features
Speaker Compatibility: The LS-20 speaker stand has been custom designed to match the Elac's Uni-Fi Reference Series bookshelf and standmount loudspeaker (including the UBR62, sold separately). Proper speaker height is key in getting maximum performance out of any speaker. The LS20 speaker stand's height is designed to keep the tweeter at near ear level, as well as optimizing the coupling of the woofer into the room. The 6" (w) x 8.5" (d) steel top-plate ensures a good fit with the Uni-Fi Reference Series speaker, as well as other bookshelf and standmount speakers of similiar size and weight (up to 25 lbs).
Steel & Aluminum Construction: The stand itself is constructed with aluminum center columns, a steel top-plate, and a substantial "H"-shape steel base-plate. The mass of the base plate adds extra stability to the stand. The included rubber bumpers for the top-plate help dampen speaker cabinet vibrations. The center posts are fillable for even further dampening.
Rubber or Spike Feet: The stand comes equipped with both spikes and adjustable rubber feet allowing use on either carpet or hard-surface floors.
- Dimensions With Spike Feet: 9.6875" (w) x 23.0" (h) x 10.6875" (d)
- Dimensions With Rubber Feet: 9.6875" (w) x 22.5" (h) x 10.6875" (d)
Loading accessories...
Customer Q&A
1 question already asked
Loading articles...
I received these as a bonus for purchasing the DBR62 speakers. They are the perfect height for these speakers. Make sure everything is tight or you will have resonances from speaker vibrations.
John from Wilkes Barre, PA