About the MATCH UP C42 MB-FRT
Component sound
Component sound
Traditionally, if the speakers went bad in your Mercedes-Benz, replacing them with aftermarket speakers wasn't the easiest installation around. MATCH by Audiotec Fischer offers a convenient solution with this UP C42 MB-FRT 4" component speaker system. MATCH's installation is hassle-free, thanks to 4" woofers designed to fit the original mounting position in your doors and 1" silk dome tweeters made for direct-fit installation in your vehicle's factory tweeter housing.
German quality
What better for your German-engineered car than a German-engineered sound system? MATCH's handcrafted speaker design is precision-built using the latest technology and materials. To minimize distortion, the woofer uses a special magnet structure that efficiently dissipates heat and promotes extreme accuracy. The dome tweeter's coated silk construction brings a natural smoothness to the high frequencies.
Fine tuning
MATCH built the compact crossover with a frequency curve and filtering designed specifically for your Mercedes. MATCH has also given you plenty of leeway in the power department, as these components handle up to 60 watts RMS. You'll be knocked out by the sound of these speakers even if you're powering them with your original Mercedes radio, but they'll perform on a completely new level when powered by an outboard amp.
Installation note: To ensure that this direct-fit speaker system is compatible with your Mercedes-Benz, please enter your vehicle information or call an Advisor at 1-888-955-6000.
Grilles are not included; the factory grilles should be suitable for most applications.
Product highlights:
- component system includes two woofers, two tweeters, and two crossovers
- 4" coated paper woofer with rubber surround
- 1" silk dome tweeter
- separate crossover (3-level tweeter attenuation)
- designed specifically for select Mercedes-Benz models
- factory harnesses plug directly into speakers
- works with factory radio, aftermarket receiver, or outboard amp
- handles up to 60 watts RMS power range (120 watts peak)
- frequency response: 90-25,000 Hz
- impedance: 4 ohms
- sensitivity: 89 dB
- grilles not included
- warranty: 2 years
- MFR # UPC42MB-FRT
What's in the box:
MATCH UP C42 MB-FRT owner's manual
- 2 UP S4MB-FRT Woofers
- 2 UP S1MB-FRT Tweeters (with 11" wires attached terminated with proprietary connectors)
- 2 Tweeter crossovers (12" input wire attached)
- Instructions (English/ German)
Reviews (6)
Customer reviews for MATCH UP C42 MB-FRT
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the MATCH UP C42 MB-FRT
Features & specs
| General | ||
|---|---|---|
| Speaker Size | Vehicle-specific | |
| Design | 2-way | |
| Tweeter Design | 1" Dome | |
| Impedance (Ohms) | 4 | |
| Tweeter Composition | Coated Silk | |
| Woofer Composition | Coated Paper | |
| Woofer Surround | Rubber | |
| Parts Warranty | 2 Years | |
| Labor Warranty | 2 Years | |
| Specifications | ||
| Sensitivity (1W at 1 meter) | 89 | |
| Sensitivity at 2.83 volts | N/A | |
| Frequency Response | 90 - 25k Hz | |
| Minimum RMS Wattage | --- | |
| Maximum RMS Wattage | 60 | |
| Peak Power Handling (Watts) | 120 | |
| Top-mount Depth (Inches) | N/A | |
| Bottom-mount Depth (Inches) | 1 5/8 | |
| Cutout Diameter or Length (inches) | 3 5/8 | |
| Mounting Height (Inches) | --- | |
Product Research
Features
Mounting: The included UP S4MB-FRT woofers and UP S1MB-FRT tweeters are direct, snap-in replacements for the factory drivers in select Mercedes Benz vehicles. Please enter your vehicle information to confirm fit.
Wiring: This system's woofers have the same plug as the factory woofers, so each factory harness plugs directly into the new woofer. The tweeter crossovers' 12" input wires are terminated with the same plugs as the factory tweeters, so the factory harnesses plug into the crossovers. The new tweeters then plug into the other side of the crossover housing.
Crossovers: The woofer crossovers are integrated into the woofer baskets and the tweeter crossovers are separate in-line components. A switch on each tweeter crossover allows attenuation of the output level; choose 0 dB, -3 dB, or -6 dB.
Crossovers Dimensions:
- Width: 2¾" (3¼" including wire)
- Height: ¾"
- Depth: 1⅜"
Loading accessories...
Customer Q&A
2 questions already asked
Loading articles...
I installed these to front and 2way coaxial to rear. Installed sony 4x45 watt mini amp behind head unit. Clean sound. Just make sure switch crossovers to -3db. 0db is too bright and does not feel good on ears
Oguz from San Jose, CA