About the US acoustics USX-2080
The solid construction and high-performance components in the US acoustics USX-2080 amplifier by themselves make it a great choice for your car audio system.
Factor in the wide-ranging, continuously variable high-pass crossovers (65-4500 Hz at 12 dB/octave) which give you precise tune-tweaking capability, and the impressive low-pass crossovers (sharp 24 dB/octave slope) which help you get firm, tight bass, and you've got an amp whose performance is hard to beat.
You'll really be blown away by the fact that an amp as good as this can be priced so low!
Details:
- stereo or bridged mono output
- Tri-way capable (Tri-Way crossover required)
- 140 watts x 2 at 2 ohms
- 280 watts x 1 in bridged mode
- requires 10-gauge power and ground leads — wiring and hardware not included with amplifier
- variable high-pass (65-4500 Hz, 12 dB/octave) and low-pass (40-460 Hz, 24 dB/octave) crossovers
- anti-thump circuit
- speaker-level inputs
- preamp outputs
- thermal, short-circuit, and power/ground reversal protection
- blue power light strip
- 3-year warranty
What's in the box:
US acoustics USX-2080 owner's manual
- Blue amplifier with chrome trim and one 30-amp blade fuse in chassis
- 1 Spare 30-amp blade fuse
- 1 Speaker level input harness
- 4 Plastic isolation mounting feet
- 4 Self-tapping screws
- 4 Flat washers
- Manual
- Warranty registration card with survey.
Customer reviews for US acoustics USX-2080
Loading...
Loading reviews...
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the US acoustics USX-2080
Product Research
Controls
Warranty Note
Protection Circuitry: Reverse polarity, thermal and short circuit protection circuits are used to help protect the amplifier from damage and ensure reliable operation.
LED Condition Indicators: A green power LED and a red protection LED are use to report the amp's operating status.
Blue Light Strip: There is a blue light strip on the top of the amplifier. The light strip illuminates when the unit is on.
Crossover Selector: The crossover selector switch setting affects the signal amplified by this unit and the signal passed by the RCA line outputs. The switch may be set for full-range speaker output with full-range line output, highpass speaker output with lowpass line output or lowpass speaker output with highpass line output.
Level Control: The level control is a variable gain control with a range of 110mV to 8.8V.
Lowpass Frequency Control: This control is used to set the lowpass frequency for this amplifier and the RCA line outputs; the control is variable from 40-460Hz (24 dB/octave slope).
Highpass Frequency Control: This control is used to set the highpass frequency for this amplifier and the RCA line outputs; the control is variable from 65 Hz to 4.5kHz (12 dB/octave slope)
Inputs/Outputs:
- Line out Connections: two gold-plated RCA jacks
Best Frequency Response: 10Hz to 30kHz, -0.5dB.
Fuse Rating and Type: 30 amp blade fuse
Channel Separation: 86 dB
Warranty: Amplifiers made before January 2001 carry a 1 year warranty. Units made during, and after, January 2001 carry a 3 year parts and labor warranty. All the units currently being sold by Crutchfield were manufactured after January 2001, so they are covered by the 3 year parts and labor warranty. The production date of each amplifier can be determined using the serial number; the first digit in the serial number indicates the year in which the amplifier was made. If the first digit in the serial number is "1", or higher, the amplifier carries a 3 year warranty; if the first digit in the serial number is a "0", the amplifier carries a 1 year warranty.
The US acoustics USX-2080 replaces these items
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
