Watch a video review from one of our experts

Kicker 09ZCK44 4-channel Amp Kit

Complete 4-gauge amplifier wiring kit — includes 4-channel patch cables and speaker wire

Item #: 20609ZCK44

8 Reviews | 1 question - 9 answers

This item is no longer available to purchase.

Original Price: $169.99

Shop all Single-amp Wiring Kits

Ask an expert advisor

No pressure, no commission — just lots of good advice from our highly trained staff.

Your 4-channel amp needs power wires large enough to supply the high current and constant voltage necessary to deliver top performance in your sound system. Kicker's 09ZCK44 amplifier power wiring kit supplies everything you'll need to send power and signal to your amplifier and speakers. The kit works with any amplifier with a fuse rating of up to 100 amperes. Kicker makes the 4-gauge cable from oxygen free copper wire so you can count on maximum power transfer.

The 16.4-foot 4-channel RCA patch cable uses twisted pair construction to keep the noise out of the signal going from your car stereo to your amp. Kicker includes 60 feet of fresh 16-gauge speaker wire so you can be sure your speakers are getting the best possible signal from your amp.

Product Highlights:

  • amplifier wiring kit
  • cables meet or exceed the American Wire Gauge specifications and requirements
  • 20 feet of 4-gauge power cable
  • 3 feet of 4-gauge ground cable
  • 20 feet of 18-gauge turn-on lead wire
  • one 4-channel 16.4-foot twisted pair RCA patch cable
  • 60 feet of 16-gauge speaker wire
  • AFS fuse holder and 100-amp fuse
  • assortment of wire termination hardware and cable ties
  • warranty: 1 year
  • Our 60-day money-back guarantee

Hands-on research

What's in the box?

Download owner's manual

  • 20' Length of 4-gauge power wire terminated with a ring-terminal on one end (blue/black jacket)
  • 3' Length of 4-gauge ground wire terminated with a ring-terminal on one end (clear jacket)
  • 20' Length of 18-gauge remote turn-on lead wire (clear jacket)
  • Fuse holder
  • 100A AFS fuse (installed in fuse holder)
  • 16.4' Four-channel RCA patch cord
  • 60' Length of 16-gauge speaker wire
  • Two 4-gauge crimp-on spade-connectors
  • Five 16-gauge crimp-on spade-connectors
  • Plastic grommet (4-gauge)
  • One 4-gauge blue rubber sleeve
  • One 4-gauge black rubber sleeve
  • Two 16-gauge blue rubber sleeves
  • Three 16-gauge black rubber sleeves
  • Four 0.25" (16-gauge) female quick slide connectors
  • One red butt-connector
  • Ten 5.5" wire ties

Product Research

Features

Z-Series Complete Kits: This Kicker Z-Series amp wiring kit utilizes direct-connect installation components to transfer the highest current possible with the fewest connections, giving you an ultra-clean and super-reliable car audio system.

Single Amplifier 4-AWG Kit: This kit includes power and signal cable designed for a 4-channel amplifier:

  • 20' length of 4-gauge power wire, terminated by a ring-terminal (0.61" wide/0.335" inner diameter), 1862 strands, silver tinned OFC copper, CEA-2015 and BC5W2 compliant
  • 3' length of 4-gauge ground wire, terminated by a ring-terminal (0.61" wide/0.335" inner diameter), 1862 strands, silver tinned OFC copper, CEA-2015 and BC5W2 compliant
  • 20' length of 18-gauge remote turn-on wire
  • Fuse holder
  • 100A AFS fuse (installed in fuse holder)
  • 16.4' Four-channel RCA patch cord, Z-Series Hyper-Flex interconnect cable (twisted pair)
  • 60' Length of 16-gauge speaker wire, 111 strands, silver tinned OFC copper, CEA-2015 and BC5W2 compliant
  • Two 4-gauge crimp-on spade-connectors (0.5" wide/0.23" opening)
  • Five 16-gauge crimp-on spade-connectors (0.3" wide/0.175" opening)
  • Plastic grommet (4-gauge)
  • One 4-gauge blue rubber sleeve
  • One 4-gauge black rubber sleeve
  • Two 16-gauge blue rubber sleeves
  • Three 16-gauge black rubber sleeves
  • Four 0.25" (16-gauge) female quick slide connectors
  • One red butt-connector
  • Ten 5.5" wire ties

Hyper-Flex Power Cable: The power and ground cables feature a Hyper-Flex jacket for easy installation.

Silver Tinned OFC Copper: The power and ground cables are constructed of silver tinned OFC copper with 1862 individual strands for reliable current flow.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Kicker 09ZCK44 4-channel Amp Kit Reviews

Average Customer Review:

8 reviews
Review this product
Great Gear Giveaway

Submit a review and then enter to win a $500 rewards card

(0)
(0)
(0)
(0)
(0)

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
  Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left

So easy! ( First timer )

Written By Anonymous, Newport News va on Sunday, March 23, 2014

Crutchfield Customer Review (What's this?)

This product helped so much! If I didn't have this kit I would have been stuck for days. Only a few things it should come with.... Extra crimp heads just in case you break a few or don't get a good connection. A medal interior tool cause mine broke, a crimp tool would help to cause not everyone owns one, and maybe an instruction manual for first timers. Other then that it still gets five stars.

Pros: Easy to install ( if you know what you're doing ), and comes with plenty of speaker cable.

Cons: Doesn't come with instructions, a crimper tool ( just go buy one and return it later ), and there isn't any extra wire connector ( crimp style ) so don't mess up or just go buy some more. Also the interior tool is a hard plastic. Mine broke so be gental.

Nice addition

Written By DS, Chagrin Falls, oh on Thursday, January 16, 2014

Crutchfield Customer Review (What's this?)

nice quality wiring kit. only gripe is the ground cable could be longer.

Cons: Ground cable a bit too short

Great quality wiring

Written By Bumpinlex, SoCal on Sunday, November 17, 2013

Crutchfield Customer Review (What's this?)

Works great, had everything I had expected.

Pros: Great quality

Cons: None

Awesome Product!

Written By Pete K, Tampa Bay, FL on Wednesday, November 06, 2013

Crutchfield Customer Review (What's this?)

Everything you need in one package! Well worth the time to replace my old wire when I put in the new amplifier.

Pros: Appearance, durability

Cons: None

Amp kit

Written By Jim, Oklahoma on Wednesday, October 09, 2013

Crutchfield Customer Review (What's this?)

Great kit!!! I had it professionally installed and the installer said it was a high quality kit and that I could have easily used an amp twice as powerful, good to know.

Kicker 09ZCK44 4-channel Amp Kit

Written By Anonymous, Flagstaff Arizona on Sunday, August 11, 2013

Crutchfield Customer Review (What's this?)

Very good quality cables, so good that I opened the box to look at them at least 5 times.

Pros: Great quality cables

Cons: Didn't need so much speaker cable. Fuse box lid wouldn't stay very well

4 channel wire kit

Written By O. G. BEATS, Hayward Ca, on Monday, July 08, 2013

Crutchfield Customer Review (What's this?)

High quality, a Crutchfield standard. Gives your installation that professional look. Not only that, the energy that flows through the wires make your system sound o so sweet. Do yourself a favor a get one on your next install.

Pros: Everything you is in the kits.

Cons: None

excellent product

Written By schnydz, Raymond, CA on Friday, January 25, 2013

Crutchfield Customer Review (What's this?)

great high quality wires! the fuse cover could fit a bit tighter, i'm worried it might bounce off

Pros: quality, price(half off with amp purchase)

Cons: fuse cover isn't real tight

Product reviews from the Crutchfield Labs

Top-quality power wire is an essential part of getting the best performance out of your amplifier. Check out this demonstration of Kicker oxygen-free power wire at the Kicker booth at CES 2014, and...

What are the Labs?

Get everything you’ll need to enjoy your new Kicker 09ZCK44 4-channel Amp Kit

The right tools make the job easier.
Metra Crimp Tool and Connectors

Metra Crimp Tool and Connectors

Package contains crimp tool and over 150 pieces

Item #: 120CRIMPKT

(15)

$19.99
Add to Cart
Metra Crimp Tool Set

Metra Crimp Tool Set

Package contains light-duty crimp tool and 20 crimp caps

Item #: 120RCVRKIT

(28)

S&G Wire Cutter/Stripper Tool

S&G Wire Cutter/Stripper Tool

Cuts and strips 12- to 22-gauge wire

Item #: 18119100

(15)

$19.99
Add to Cart
S&G Tool Aid 87615

S&G Tool Aid 87615

Window and Door Clip Removal Tool

Item #: 18187615

(12)

S&G Tool Aid 87650

S&G Tool Aid 87650

Door Trim and Panel Removal Tool

Item #: 18187650

(69)

Pro.Fit Hook Tool Set

Pro.Fit Hook Tool Set

Installation tools — pair

Item #: 042DM3022

(9)

Pro.Fit Trim Panel Tool

Pro.Fit Trim Panel Tool

Remove your vehicle's trim panels without damage

Item #: 042DM4022

(87)

Pro.Fit Wire Worm

Pro.Fit Wire Worm

Installation tool helps route wiring through tight spaces

Item #: 042DM4533

(33)

$12.99
Add to Cart
Spec Tools Stubby Driver

Spec Tools Stubby Driver

Ratcheting driver for tight installations

Item #: 180PGS5100

(2)

$19.99
Add to Cart
Skewdriver Pro SPK4042

Skewdriver Pro SPK4042

Ratcheting straight and offset screwdriver set with 40 bits (Skewdriver Pro with ratchet handle, pictured)

Item #: 180SPK4042

(8)

$49.99
Add to Cart
Spec Tools SQR-200a Squeeze Wrench

Spec Tools SQR-200a Squeeze Wrench

Narrow space ratchet kit with 18 sockets

Item #: 180SQR200A

(1)

$49.99
Add to Cart
Bojo Trim Panel Tools

Bojo Trim Panel Tools

Set of 3 pry tools — helps remove interior and exterior trim and door panels

Item #: 126CR3NGL

(181)

$11.99
Add to Cart
Bojo Trim Panel Tools

Bojo Trim Panel Tools

Set of 6 pry tools — helps remove interior and exterior trim and door panels

Item #: 126CR6NGL

(52)

$24.99
Add to Cart
Bojo Trim Panel Tools

Bojo Trim Panel Tools

Set of 6 pry tools — helps remove interior and exterior trim and door panels

Item #: 126CR6LNGL

(2)

$29.99
Add to Cart
Metra Crimp Caps

Metra Crimp Caps

Package contains 100 crimp caps — for 14- to 16-gauge wire

Item #: 120CCL1614

(62)

Posi-Products™ Wire Connectors

Posi-Products™ Wire Connectors

16 connectors for installing 10- to 26-gauge wires

Item #: 669PP611

(7)

Questions & Answers Ask the community. Share your knowledge.

1 question already asked

I DID NOT INSTALL MY AMP KIT THIS IS A CUSTON 1968 CAMARO BEING PUT TOGETTER FOR ME SORRY I COUNT'N HELP YOU....... [ PAUL  Feb 01, 2014 ]
I did. Its really not that bad and the ends are covered in the fuse holder. I ended up using the small zip ties to keep it from pulling away where it was cut. I agree. Seems nuts the way it was made. Hope that helps. [ ALEXANDER  Jan 31, 2014 ]
I had mine professionally done and that's what they did. I feel that's the only way to do it. [ AARON  Jan 31, 2014 ]
It doesn't really matter which end is where as long as the fuse is as close to the battery as possible. I myself cut the end with the protective sleeve so I had the protective sleeve on both sides of the fuse [ ROBERT C  Jan 31, 2014 ]
Actually, I called Kicker. Their explanation was a good one. About 12-16" from the battery end of the power wire, you will find 2 shrink wrap pieces already "heated" to the protective loom (sleeve). There will be about 1.5 to 2 inches between them. There is also a yellow sticker between the 2 heat shrink pieces warning that the fuse must be placed within 18" of the battery. Simply cut the power wire in half right in the middle of those 2 pre-shrunk heat shrinks. Then, strip the wire loom and sheathing off the wire back to the heat shrinks. Place the 2 stripped ends of the power wire into the inline fuse holder. The stripped wire will go all the way into the fuse holder until the heat shrink pieces touch the fuse holder. Tighten the retaining bolts of the fuse holder down. What you're left with is a VERY professional looking power wire with an inline fuse holder built in - with the heat shrink right next to the fuse holder as if you put it there yourself. :) Really looks good. I'm really impressed with Kicker. They've got some well thought out, quality stuff! [ 9Awesomeb  Jan 31, 2014 ]
I cut mine within the 18 inches. I was more concerned with having the in-line fuse close to the battery than the look of the cable. I LOVE the amp. [ RICHARD W  Jan 31, 2014 ]
No matter how nice the wiring kit you always want to have an inline fuse within 3 feet of the battery. While I have seen people skip the fuse all together, if something shorts out, it's much cheaper to replace a fuse or 2 rather than a new amp. I have a fuse by the battery as well as before the amp, call me paranoid, however those are cheap fixes. [ DOYLE  Jan 31, 2014 ]
I took a razor blade and cut the protective sleeve and slid it back and installed the fuse. The sleeve frays a little but mine is still holding together just fine. The kit is worth the money that's for sure. [ RYAN  Jan 31, 2014 ]
I did cut the wire close to the fuse holder. 8 inches. I got some heavy duty shrink tube and place it after cutting and removing the necessary insulation to instal the fuse holder. with a sharp blade cut the protective mesh, then the insulation and finally the wire. Then cut two 3 inch shrink tube and place over the the wire and the mesh. This will make the wire look perfect again. [ OSCAR  Jan 31, 2014 ]