6 tips for home A/V cable management

1. Use wire ties to bundle cables

Have more than one cable running to or from your TV, cable box, or receiver? Bundle them up with ties.

Some wire ties are reusable — like the Methra ethereal Velcro® cable wraps. They're a great option for renters.

Here are four tips for using ties effectively:

1. After routing and connecting cables, bundle at one end. This makes them easier to handle.
2. Don’t cinch the ties too tight. They can crimp the wires and damage their insulation.
3. Snip off any excess from the ties for a clean look.
4. Bundle A/V cables and power cables separately.

2. Secure your wire bundles

Adhesive pads designed to work with wire ties can be attached to walls. These can help keep rear channel speaker wires out of the way by securing them to your wall’s molding.

These adhesives can also hold a cable bundle running from a wall-mounted TV flat against the wall for a neater appearance. You can also use them to fasten wires and wire bundles to the back of your A/V cabinet.

You can also attach your bundles using cable clamps.

Be sure to match the shape and the size of the clamp to the cable. Use screws rather than tacks to secure these clamps. They're more secure, and you can easily remove and reattach them if you rearrange your cables. 

3. Use raceways to conceal cables

You don’t have to run wires inside walls to conceal them. Raceways are plastic or wooden channels that conceal and protect wires and wire bundles.

Raceways attach easily to walls and baseboards. Most are paintable, so you can make them blend into the background and virtually disappear.

Raceways come in different sizes. If you’re concealing a cable bundle, make sure the raceway is big enough to comfortably fit over it.

4. Label everything

Labeling your wires ensures you can easily identify each of your cables. You'll be able to quickly swap out a component without losing track of what's what.

Crutchfield’s color-coded CableLabels are a great solution. They come pre-printed with all the most commonly used components in an A/V system.

You can also make your own labels. The important thing is to do so — even if your system’s small and relatively simple. As it grows, you’ll be glad your cables were organized from the start.

5. Organize the cables behind your equipment rack

Bundling cables can bring the mass of wires behind a rack or A/V cabinet under control. Wire ties are the best solution here.

Remember to bundle power cables and A/V cables separately. That minimizes the chance that electromagnetic interference from power cables will degrade your system’s performance.

You can also use tacks or adhesive pads to secure bundles to the back of your rack or cabinet.

6. Secure loose wires running to rear surround speakers

Wires running to rear speakers should be secured so you won't step on them or trip over them.

Running wires under carpeting isn’t recommended — especially in high traffic areas. If the wires are continually stepped on, over time their insulation can get rubbed away. It’s best to run rear channel wires along the baseboard.

Wire tacks are the easiest way to secure this wire. Or use raceways for a more finished appearance.

For more helfpul tips, see our home theater receiver setup guide and our in-wall wiring guide.