Contact us
Close contact box
Connect ID #
990 870 426 4
Connect ID #
990 870 426 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

2004-2006 Jeep Wrangler Unlimited

How to upgrade the stereo system in your Jeep Wrangler Unlimited

Factory radio in Wrangler Unlimited

In brief: This Crutchfield Research Garage article gives you an overview of your Jeep's stock stereo system and your aftermarket upgrade options. We'll tell you all about: 

Then, use our vehicle selector to find the gear that will fit your Wrangler. 

Overview of the Jeep Wrangler

You don't usually talk about great sound systems and Jeep Wranglers in the same breath, but this particular Wrangler Unlimited actually gives you some pretty cool options for audio upgrades. You'll find enough room in the dash and sound bar for a wide variety of replacement speakers.

You'll also have some interesting options for bass, ranging from replacing the sub in the center console to amplified subs that fit behind the rear seat. With a little bit of work, you can fit any DIN (2" tall) radio in the dash. That's really good news compared to Wranglers and CJ Series Jeeps of the past, which were definitely not built with audio excellence in mind.

jeep wrangler factory radio

The Jeep Wrangler's factory radio (Crutchfield Research Photo)

The factory stereo system

This Jeep Wrangler came with an AM/FM/CD receiver and offered two speaker options:

4-speaker system: two 4" 2-way speakers in the dash and two 5-1/4" speakers in the roll bar;

7-speaker system: two 4" speakers with accompanying tweeters in the dash, two 5-1/4" speakers in the roll bar, and a 6-3/4" sub in the center console.

jeep wrangler factory radio

A closeup of the Wrangler's radio (Crutchfield Research Photo)

Removing the factory radio

There's only about 6" of space behind the dash, but you can unbolt and remove the factory radio's rear support without too much trouble, giving you plenty of room for any DIN-size radio. You'll need a mounting kit to trim out the new radio, a wiring harness that lets you connect your new radio without having to cut the factory wiring, and an adapter that connects the Jeep antenna to your new radio. These installation parts are available at a steep discount with your Crutchfield order.

Tools needed: Phillips screwdriver, a flat blade screwdriver, a 10mm socket wrench, and a panel

Read our Car Stereo Buying Guide for shopping tips and advice.

Shop for car stereos that fit your Jeep Wrangler Unlimited

Steering wheel audio controls

In most cases, it's reasonably easy to retain your Jeep's steering wheel audio controls when you install a new stereo. When you enter your vehicle information, our database will choose the adapter you need to make your factory steering wheel controls work with a compatible aftermarket receiver.

Detailed stereo and speaker removal instructions

MasterSheet image
With step-by-step disassembly instructions and plenty of up-close, detailed photos, our exclusive Crutchfield MasterSheet™ takes the guesswork out of removing the factory stereo and speakers. It's free with your Crutchfield order, or you can purchase one separately for just $9.99.

Removing the factory speakers

The Wrangler's factory speakers are reasonably easy to reach and replace, so this is great DIY project.

Factory Front Speaker

The Wrangler's factory front speakers (Crutchfield Research Photo)

4-speaker system

This Jeep will accept 4" speakers in the dash, and 5-1/4" speakers in the sound bar. Both locations offer plenty of room for replacement speakers, so you'll have plenty of options. Your Wrangler may not have speakers in the dash, in which case you'll have to go to your Jeep dealer for speaker grilles and brackets.

Many Wrangler owners who drive with their top off choose marine-certified speakers that won't be bothered by an occasional shower. We also offer marine-rated subwoofers and amplifiers, so you can build a Jeep audio system that's tough enough for extreme off-roading.

It's a good idea to get speaker harnesses along with your new speakers. They'll allow you to attach the new speakers to the plugs that connect to the Jeep factory speakers, and they make it easier to reinstall the factory speakers if you ever sell your Jeep. These wiring harnesses are available at a deep discount with your Crutchfield speaker order.

jeep wrangler soundbar speaker

The soundbar speakers are easy to work with (Crutchfield Research Photo)

7-speaker system

Front speakers: Each of the front dash openings houses a 4" speaker and a tweeter, and you can access the location by removing two small screws. The easiest upgrade is to install 4" coaxial speakers and remove the factory tweeters. If you're willing to do a little work, you can put a nice set of 4" components up front, but you'll have to fashion mounting plates for aftermarket tweeters.

Sound bar speakers: You only have to remove a few screws to replace these speakers, and you have enough room for almost any 5-1/4" speakers.

Tools needed: Phillips screwdriver

q-forms kick panel pod

A Q-Forms Kick Panel Pod (Q-Forms photo)

Custom speaker installations

Select Increments offers Mod-Pods for the Jeep Wrangler. These unloaded enclosures hold 5-1/4" speakers just below the Jeep's doors.

Read our Car Speakers Buying Guide for more information

Shop for speakers that fit your Jeep Wrangler Unlimited

jeep wrangler trunk

The Unlimited's extra length gives you a little more space for a bass system (Crutchfield Research Photo)

Bass in your Jeep Wrangler

An aftermarket subwoofer will really add punch to your Wrangler's sound system.

4-speaker system

You won't find many bass enclosures made specifically for the Wrangler Unlimited, but lots of people install an amp and sub enclosure in the larger-than-usual area behind the seats.

If you like to get a lot of mud on your Wrangler, it's a good idea to splice connectors into the power and speaker wires so you can quickly remove your sub before you head out on the trail. You'll also appreciate the quick disconnect if you're headed to a risky area and don't want someone walking off with your gear.

If you're into building your own enclosure, here are measurements for the available space:

  • Width (side to side) = 34"
  • Height = 14"
  • Depth (front to rear) = 23" at top, 25" at bottom.

A wide range of subs are available. Select Increments makes the Stealth-Pod, an enclosure that bolts onto the back door and holds a 10" sub of your choice.


Select Increments Stealth-Pod (Select Increments photo)

7-speaker system

You'll have to remove the center console to replace the factory subwoofer, not a difficult job, but it'll take some time. Here are the dimensions for this factory sub location:

  • Mounting depth: 2.789 inches
  • Magnet diameter: 4.178 inches
  • Mounting height: 0.712 inches
jeep wrangler sub console

The factory sub is in the console (Crutchfield Research Photo)

You may have to re-drill screw holes, but you should be able to find a small 6-1/2" or 6-3/4" sub that's within these dimensions. And, as long as you're going to drop an upgraded sub in the console, you might as well put a small amp under the seat to give it some decent power. If you're keeping the factory amp, you'll want to replace the factory dual 2-ohm voice coil sub with another DVC sub so you don't lose power.

Tools needed: Phillips screwdriver, panel tool, 10mm socket wrench (with ratchet and extension), T20 and T30 Torx drivers, needle nose pliers

Learn more about building a bass system in our Car Subwoofer Buying Guide

Shop for vehicle-specific subwoofers for your Jeep Wrangler Unlimited
Factory sub

Factory sub removed from the console (Crutchfield Research Photo)

Other options for your Jeep Wrangler

Here are a couple of other ideas for making your Wrangler just a little bit better.

Amp up your sound with more power

The factory amps are okay, but they're just not as powerful as aftermarket amplifiers. In a boxy, noisy vehicle like the Wrangler, you need clean power going to your speakers and sub. A new amplifier will give you the "headroom" you need to get the sound you want at highway speeds. Learn more about adding amps to your Jeep's system in our Car Amplifier Buying Guide

Add custom-fit floor liners

If you're using your Wrangler as intended, it's probably going to get dirty every now and then. Keeping it in great shape really helps retain resale value, so protect your carpets (and your investment) with a set of custom-fit WeatherTech floor liners.

Protect your Jeep with a security system

Installing a security system in your Wrangler isn't easy (security systems rarely are), but it's definitely a good idea. Our Crutchfield Advisors can help figure out what you need to get the job done, but we usually recommend taking your car and new gear to a professional installer.

Jeep Wrangler FAQ

I'm OK with the power of the Jeep system, but I'm constantly turning up the bass control to get more punch. What should I do?

You might try adding a powered sub first. Cranking up the bass control puts a huge strain on your Jeep's radio, and the extra bass produced by a sub allows you to turn the bass control back down so you get more usable power from your radio. The extra bass will also make your factory speakers sound better when you're driving with the top off.

My Jeep's system sounds cool in the driveway but it's useless at 55 mph with all the road noise. What should I replace first?

Whatever you replace, you should definitely buy an amplifier because clean power is what you need. The amplifiers that are built into car stereos are relatively low-powered — an outboard amp will give you more headroom so your system can coast along instead of straining to create the level you need on the highway.

My music doesn't sound that great, but I really don't want to put a new radio in my Jeep. Will new speakers help?

Absolutely. If you're going to keep your factory radio, look for speakers that are efficient (sensitivity rating over 90 dB). Spend a little more money on the 5-1/4" speakers that are going over your head — a good tweeter will bring out all the details in your music without taking your head off.

Let's get started!

Ready to shop? Use our vehicle selector to find the gear that will fit your car or truck. If you have questions of your own, give us a shout via phone, chat, or email

Looking for
car stereos?

Car Stereos Shop our selection

Find what Fits your vehicle


Checking fit...

Compare the sound