Contact us
Close contact box
Connect ID #
499 168 438 4
Connect ID #
499 168 438 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

2007-2014 Chevrolet Tahoe/Suburban, and GMC Yukon/Yukon XL

How to upgrade the stereo system in your Tahoe, Suburban, or Yukon

Chevrolet Tahoe

In brief: This Crutchfield Research Garage article gives you an overview of your SUV's stock stereo system and your aftermarket upgrade options. We'll tell you all about:

Then, use our vehicle selector to find the gear that will fit your Chevy or GMC.

Overview of the Tahoe, Suburban, Yukon, and Yukon XL

GM's full-size family of SUVs has long been a favorite of big families, outdoor enthusiasts, and hyper-observant men in dark suits and sunglasses. The're comfortable, capable, and thoroughly practical for anyone who needs this much SUV. No wonder they've become a (pardon us) suburban staple.

The Suburban/Yukon XL/etc. is a big vehicle. Really big. If you have more people to move than this vehicle can hold, you need to buy a passenger van. If you have more stuff, you need to rent a box truck. For most people, though, there's more than enough space in these trucks to haul everything that matters in comfort and style. By any name, the Suburban is a classic piece of American automotive design.

GMC Yukon XL

The Tahoe and Yukon are (slightly) smaller than the Suburban and the aptly named Yukon XL. Stereo-wise, there's almost no difference between them, so we've lumped them all together in one super-sized article. The factory stereos were adequate, but there's plenty of room for improvement. Thankfully, these trucks are generally easy to work on, and there's a lot of aftermarket gear available.

Chevy Tahoe radio

The Tahoe/Yukon/Suburban's rather basic base radio (Crutchfield Research Photo)

The factory stereo system

These trucks could be ordered with several different stereo systems, including a 6 CD in-dash Bose® system and options to add navigation, rear seat audio, DVD systems, or satellite radio. It’s possible to add to or completely replace any of these stereo systems fairly easily, though getting to the amplifier and 6-1/2" subwoofer of the Bose system requires some extensive teardown of the interior.

Some integration adapters we sell let you keep factory features you may have in these vehicles, like the rear seat entertainment system, backup camera, or Bluetooth® hands-free calling. It's also possible to replace (and improve) every one of them with the majority of receivers and other gear we sell.

Chevy Tahoe Bose radio

The optional big-screen nav radio (Crutchfield Research Photo)

Removing the factory radio

Removing the stock receiver isn't terribly difficult, but you should work carefully and patiently to avoid damaging the trim pieces. Starting at the bottom edge, pry around the edges of the receiver trim panel to release the retaining clips. These clips are very tight, so don't succumb to the temptation to use brute force. They'll come, but finesse is the best approach.

Once you've gotten the trim panel off, remove eight 7mm screws securing the switch panel, the temperature controls, and the radio. It's okay to let the switch panel and temperature controls hang while you pull out and disconnect the radio.

Single-DIN and most double-DIN aftermarket receivers will fit nicely in your truck with the help of a mounting kit. Crutchfield includes this kit and an antenna adapter at a very nice discount with most orders, along with our step-by-step Crutchfield MasterSheet disassembly instructions.

Some double-DIN (4" tall) radios will not fit because the wiring harness interferes with the dash substructure. Check our product photos to make sure the radio you're buying does not have wire harnesses or RCA connectors that plug into the top half of the back of the radio. If you have any questions, our Crutchfield Advisors are here to help.

Detailed stereo and speaker removal instructions

MasterSheet image
With step-by-step disassembly instructions and plenty of up-close, detailed photos, our exclusive Crutchfield MasterSheet™ takes the guesswork out of removing the factory stereo and speakers. It's free with your Crutchfield order, or you can purchase one separately for just $9.99.

In order to connect a new stereo to your truck's electronics, you'll also need a special integration adapter. This adapter is not free, but we offer a very nice discount if you purchase it with your new stereo. This integration adapter lets you retain your warning chimes, keeps the Bose amplifier working, and retains the OnStar functionality (if either are present…).

You might also need a relay to keep your audible turn signals working with your new car stereo. If your SUV is equipped with the GM Rear Seat Entertainment (RSE) system, you'll definitely need a separate adapter to connect it to the audio/video output on your new receiver

Since installing a new receiver can disable the warning chimes in your Yukon or Tahoe, we strongly advise that you use the recommended integration adapter to retain these chimes. We will not provide technical support for any installation that does not utilize the recommended adapter.

The optional factory DVD system features a flip-down screen in a roof console and two pairs of wireless headphones. A secondary set of controls for the radio and DVD system are housed in the rear of the center console, and some models include an A/V input for adding more gear, like a gaming console.

Creating some aftermarket movie magic in your SUV is relatively easy, thanks to products like flip-down overhead monitors with DVD players or replacement headrest screens that match the truck’s interior. Our Outfit My Car tool will help you find what you need for your SUV.

Tools needed for stereo removal: Panel tool, 7mm socket, ratchet, and extension

Read our Car Stereo Buying Guide for shopping tips and advice.

Steering wheel audio controls

In most cases, it's reasonably easy to retain your truck's steering wheel audio controls when you install a new stereo. When you enter your vehicle information, our database will choose the adapter you need to make your factory steering wheel controls work with a compatible aftermarket receiver.

Chevy Tahoe front door speaker

The front door speakers aren't hard to replace, but there are several steps involved (Crutchfield Research Photo)

Removing the factory speakers

Your Tahoe, Suburban, Yukon, or Yukon XL is equipped with speakers in the front and rear doors. If you have the Bose system, you'll also find speakers in the dash and the front and rear pillars.

You can read our Car Speakers Buying Guide for more information on choosing speakers for your vehicle.

Chevy Tahoe front door speaker

Removing the front door speaker (Crutchfield Research Photo)

Front door speakers

The front door speakers are 6-3/4" models that can be replaced with same-size or 6-1/2" aftermarket speakers. There are a couple of moderately challenging aspects to the process, but they're well within the capabilities of a reasonably skilled do-it-yourselfer.

You'll need to remove the door panels, of course, and while that's not terribly difficult, there are a lot of "small" tasks (removing the factory speakers from their mounting brackets, for example) involved in the process. Work carefully, and keep track of the various trim pieces and screws you remove while you're taking the door apart.

No matter which size you choose, replacement speaker adapter brackets are required, and they're included free with your speaker purchase. A wiring harness is not available, though, so you'll either need to splice the speaker wires or connect the speaker to the vehicle wires using a set of Posi-Products speaker connectors. Whether you use your truck off-road or not, the latter is recommended because the connection is much more secure.

The removal and replacement process isn't difficult, but it is somewhat detailed and there is drilling involved. Complete, illustrated instructions can be found in the Crutchfield MasterSheet included with your order.

If you're even slightly handy around the home and garage, you already know how to use a power drill. That said, we should remind you to be extremely careful when drilling in your vehicle. Be aware of things such as wiring, windows, fuel lines and safety devices. And, of course, check (and re-check) the drilling depth and location before you drill.

We frequently suggest foam speaker baffles for other big vehicles, but with these GM SUV's, we strongly recommend them. These big, thick doors can waste a lot of great sound, and this is an inexpensive way to rein it back in. These baffles are easy to install, and they'll give you improved performance while also protecting your speakers.

Tools needed: Panel tool, socket wrench, 7mm & 10mm drivers, flat blade screwdriver, drill & 1/8" bit.

Chevy Tahoe rear door speaker

The rear doors are a little easier to work with in these SUVs (Crutchfield Research Photo)

Rear door speakers

The rear speakers are a little easier to work with. As with the front speakers, the rears are a non-standard factory GM size, but they can be replaced with a host of 6-1/2" or 6-3/4" aftermarket models.

You'll need to do a bit of drilling here, too, but it's the same basic job that it was up front. You should check for mounting screws in your rear speaker packaging, too. Detailed instructions for the rear door speaker installation can also be found in your Crutchfield MasterSheet.

We highly recommend the use of speaker baffles in this location. They're an inexpensive way to reduce rattling, protect your speakers and get the best possible performance.

Tools needed: Panel tool, socket wrench, 7mm & 10mm drivers, flat blade screwdriver, drill & 1/8" bit.

Chevy Tahoe front pillar tweeter

The front pillar tweeter (Crutchfield Research Photo)

Front pillar speakers

The Bose stereo system includes one tweeter mounted in each A-pillar. These speakers are reasonably easy to remove, but you’ll need to do a bit of work to install the replacements.

There's no wiring harness adapter made for this location, so you'll need a set of Posi-Products connectors to hook everything up. You'll also need to create mounting brackets, and a pair of our universal backstraps are a dandy DIY solution.

Tools needed: small flat blade screwdriver

Chevy Suburban Bose dash speaker

The Bose-only center dash speaker (Crutchfield Research Photo)

Center dash speaker

If your truck is equipped with the Bose stereo package, there's a speaker in the center of the dash beneath a grille. It's a tight spot, but a number of 3-1/2" aftermarket speakers will fit here. Use a panel tool to pry up the four metal clips that secure the grille, remove the 7mm screws holding the speaker in place, then take out the old speaker.

The key here is to work carefully. The same advice holds true any time you're removing plastic panels, but it's especially important here. A slip on a door panel is one thing, but a massive boo-boo in the center of the dash will annoy you every time you get in the truck!

This, by the way, is another location that would benefit from a foam speaker baffle.

Tools needed: Small flat blade screwdriver

Chevy Tahoe rear pillar speaker

The rear pillar tweeters (Crutchfield Research Photo)

Rear pillar tweeters

The small rear pillar tweeters are, like their counterparts up front, reasonably easy to reach. You'll need to pry away some panels, but that's not terribly difficult. You'll need a mounting bracket, so we recommend bending and shaping our universal backstrap to hold the new tweeters in place.

Tools needed: Phillips screwdriver

jl audio stealthbox

This Stealthbox fits on the driver's side rear window ledge

More bass in your Tahoe, Yukon, or Suburban

The factory subwoofer is an oblong piece that's roughly the size of a 6-3/4" speaker. It's located in the center console, which is nice, but if you want to replace it, the entire console must be removed. That is not so nice. In fact, it's a very difficult process that provides plenty of opportunities to damage the truck's interior. Because of all this, your best choice is to simply bypass the factory sub and look into the numerous aftermarket solutions available for these vehicles.

There are a variety of subs from JL Audio and MTX Audio that will give you the improved bass you want while also blending into your vehicle's interior. They're all slightly different, but they all sound very impressive. Installing them takes some skill, though, so you should consult a Crutchfield Advisor before ordering. Due to the complexity of the installation, this is a case in which we strongly suggest turning the work over to a pro. To learn more about these enclosures, visit our Outfit My Car feature and enter your vehicle information.

You can also add more sound up front, with the help of Q-Forms Kick Panel Pods. As you might imagine, these unloaded enclosures install in the kick panels, and they're available in three colors to match your truck's interior. Q-Forms hold 6-1/2" speakers in an ideal position, angling them to maximize sound quality. Since they're located near your feet, the distance from your ears to each speaker becomes closer to equal, creating a superior soundstage. Q-Forms do not come with pre-cut holes and installing them can be a bit challenging, so check with a Crutchfield Advisor before you order.

There's plenty of room for boom in the cargo area of your SUV, but there's obviously a bit less if you have third-row seats. The amount of subwoofer power you need depends on your musical tastes and how you use your truck every day. If you want to squeeze every bit of bass out of your music, you have room for a subwoofer enclosure, plus the amplifiers you'll need to power your subs.

If you're just looking to add richness and depth to your tunes, you can install something a bit smaller that'll still leave you some room for hauling things. And, if you need those third-row seats or place a lot of value on the "utility" part of your sport utility vehicle, you can always opt for a powered subwoofer. You'll get a surprising amount of sound, plus you'll still be able to stock up at the warehouse store on the way home from the kids' soccer match.

Learn more about building a bass system in our Car Subwoofer Buying Guide.


Dynamat will help seal in your sound (Crutchfield Research Photo)

Other options for your Tahoe, Suburban, Yukon, or Yukon XL

The aftermarket offers an amazing variety of other ways to improve your SUV. Here are some of the ways Crutchfield can help.

Sound deadening

Like most big, boxy SUVs, these trucks can get a bit loud at speed. To combat wind noise and road roar, you can install Dynamat in the doors and (if you install a big sub) rear hatch area. This sound-deadening material will keep the noise out and allow you to really enjoy your music.

Rear-view camera

With a vehicle this large, it's important to be aware of your surroundings. A rear-view camera is a big help when you're backing up in a crowded parking lot. We offer cameras from Kenwood, Alpine, Pioneer, and more. Some are designed to work with same-brand receivers only, but others come with a composite video connector and will work with almost any video receiver.

Remote start and security systems

Adding remote start capability to your vehicle lets you warm it up in the winter or cool it down in the summer. The iDatastart system is incredibly convenient and makes it easier than ever to install a remote start system, so we highly recommend it. The module requires a vehicle-specific T-harness (sold separately) to connect with your vehicle's computer, security, and ignition systems, so we ask that you call to order so that we can make sure you get the right harness for your ride.

You can also talk to your Crutchfield Advisor about a security system. They’re not as easy to install (we usually suggest letting a professional do the job), but we can help you choose a system that’ll work in your vehicle.

Let's get started!

Ready to shop? Use our vehicle selector to find the gear that will fit your car or truck. If you have questions of your own, give us a shout via phone, chat, or email

  • Tyler Dubuque from Panama City

    Posted on 11/16/2022

    I have a 2014 Tahoe with the basic radio but Bose speakers. There are plenty of aftermarket plug and play radios but I want one that works with the factory speakers for blinker and door chimes. I dont like the sound that comes from the external speaker that most use to bypass the use of the door speakers.

    Commenter image

    Jon Paul from Crutchfield

    on 11/17/2022

    Tyler, With questions like that, it's always better to have a conversation with a real live human. Give us a call and talk to one of our advisors. We can help you choose the right gear and give you the right advice on how to install it.
  • Jim Jurvelin from Grand Rapids, Mn

    Posted on 9/14/2022

    I have a 2009 Yukon XL with a Bose system without navigation and has rear seat dvd etc. and also in the rear seat the heated rear seats are turned on there. I would like to disable the existing Bose Amplifier but I don't know if the heated rear seats are powered or part of the amplifier. I have already replaced the door speakers and really don't want to have to use the Bose Amplifier. I also have a factory backup camera that is in the rear view mirror and would like to disable it and install a new one to a new head unit. Please let me know if you can help me with my problems!

    Commenter image

    Jon Paul from Crutchfield

    on 9/15/2022

    Jim, With questions like that, it's always better to have a conversation with a real live human. If you bought your gear from Crutchfield, you can call Tech Support for free help troubleshooting your system.
  • Megan from Rocky Mount

    Posted on 9/7/2021

    I have a 2012 Yukon XL Denali with Bose speakers, the big navigation touch screen, and rear entertainment system with DVD player. I want to upgrade to an Apple CarPlay system but I'm confused about all the pieces and parts I would need beyond the stereo itself. Help?

    Commenter image

    Jon Paul from Crutchfield

    on 9/8/2021

    Megan, We can help with that! I've sent your question to our sales team, and they'll be contacting you via email soon. For immediate help, you can contact them via phone or chat.
  • Gregory Jordan from Dover

    Posted on 4/20/2021

    Very informative and very helpful

    Commenter image

    Crutchfield Writing Team from Crutchfield

    on 4/20/2021

    Gregory, Thanks!
  • Johnathon Hudson from Monett

    Posted on 4/7/2021

    I want to leave the factory setup as i but i want to add a pair of 10s and an amp, just like you would do with anyother vehicle. Is there anything i should be aware of? Im going to be running a line out converter to get the rca signal can i tap into the rear pillar tweeters to do this? Any help will be appreciated

    Commenter image

    Jon Paul from Crutchfield

    on 4/7/2021

    Johnathon, With questions like that, it's always better to have a conversation with a real live human. Give us a call and talk to one of our advisors. We can help you choose the right gear and give you the right advice on how to install it.
  • Rafael from Odenton, Maryland

    Posted on 3/20/2021

    I have a 2012 Chevy Tahoe and I would like to replace all the speakers in the front doors and also the small Bose speakers. Can you tell me exactly the speakers that I should order to be replaced?

    Commenter image

    Jon Paul from Crutchfield

    on 3/22/2021

    Rafael, When you enter your vehicle's info into our Outfit My Car tool, you'll see which stereos fit your car, plus the correct harness. If you have any questions, our advisors are available via phone or chat.
  • John from Brentwood

    Posted on 12/7/2020

    If I am replacing my Bose speakers do I need to replace the Bose crossover with the one that came with Infinity speakers? And is so, where would I find the Bose crossover?

    Commenter image

    Jon Paul from Crutchfield

    on 12/7/2020

    John, With questions like that, it's always better to have a conversation with a real live human. Give us a call and talk to one of our advisors. We can help you choose the right gear and give you the right advice on how to install it.
  • James A. from Prentiss

    Posted on 11/14/2020

    I changed out my old factory stereo of my 2007 Chevy Tahoe and put in a pioneer face screen and everything works but something is killing my battery and the radio will not go off with the switch when I turn the truck off what is wrong need help

    Commenter image

    Jon Paul from Crutchfield

    on 11/16/2020

    James, Sounds like something might be wired wrong. With questions like this, it's always better to have a conversation with a real live human. If you bought your gear from Crutchfield, you can call Tech Support for free help troubleshooting your system.
  • Greg from minneapolis

    Posted on 7/1/2018

    Any ideas of the best location in a 2009 Tahoe w/bench seating (non Bose) for the new Alpine X-A90V Amp?

    Commenter image

    Jon Paulette from Crutchfield

    on 7/2/2018

    Greg, Depends on your preference, really. Most folks install a new amp under the front seat or in the cargo area, but if you have a more creative idea, go for it!
  • Commenter image

    Jon Paulette from Crutchfield

    Posted on 1/11/2018

    Blake, Nothing sound more like Bose speakers than other Bose speakers, but you don't have to use them if you don't want to. Give us a call and talk to one of our advisors. We can help you choose the right speakers for your Tahoe.

Find what Fits your vehicle


Checking fit...

Compare the sound