Skip to main content
1-888-955-6000 1-888-955-6000 Opens at 9am ET
1-888-955-6000 1-888-955-6000 Opens at 9am ET

2010-2014 Cadillac CTS Sport Wagon

cadillac CTS sport wagon

In brief: This Crutchfield Research Garage article gives you an overview of your CTS Sport Wagon's stock stereo system and your aftermarket upgrade options. We'll tell you all about:

Then, use our vehicle selector to find the gear that will fit your vehicle.

Overview of the CTS Sport Wagon

If you spend any time reading about cars, you've probably noticed that people who write about cars just love station wagons. People who actually buy cars, on the other hand, couldn't care less about station wagons. This makes no sense to car writers, who cannot understand why you people don't do exactly as they (okay, we) say.

For example, you really should have bought a Cadillac CTS wagon. If you had, they'd probably still be making them and the older ones would be affordable for people who write about cars for a living. Ahem. And you'd have a heck of a car, especially if you stepped up to the high-performance CTS-V edition, the mere thought of which still makes many car writers feel tingly and lightheaded.

You don’t see these cars everywhere you look, which is part of the charm, really. If you've got one, you're lucky. If you're looking for one, good luck. Just remember that the guy in the slow lane giving you a thumbs-up from a 30 year-old Volvo wagon probably writes about cars, so slow down a bit and let him enjoy some eye candy.

Cadillac CTS sport wagon radio

The factory radio's not bad. Which is good, because you can't replace it. (Crutchfield Research Photo)

The factory stereo system

Like all second-gen CTS variants, the wagon’s factory systems consist of a Bose stereo system, and the top shelf 10-speaker Bose® 5.1 surround system. They’re pretty good, really, but at this point in time, they’re getting a tad old. If you want to bring better sound to your CTS Sport Wagon, you’ll need to upgrade the speakers. As for the receiver, well, we'll get to that in a second....

Whether you’re starting with the base system or the Bose surround system, new aftermarket gear will give you more power, more clarity, and better performance overall. The project can be done in stages or all at once, and if you’re doing it yourself, Crutchfield’s legendary disassembly instructions and free tech support will help you get the job done right.

Before you start working, make sure you set the car’s parking brake and disconnect the negative battery cable to prevent any electrical shorts. You’ll need to refer to the car's owner's manual for information on disconnecting the rear-mounted battery.

Detailed stereo and speaker removal instructions

ResearchNotes image
With step-by-step disassembly instructions and plenty of up-close, detailed photos, our exclusive Crutchfield ResearchNotes™ takes the guesswork out of removing the factory stereo and speakers. It's free with your Crutchfield order, or you can purchase one separately for just $9.99.

(Not) removing the factory radio

The stock radio is just fine, really. That’s a good thing, because there’s currently no way to replace it with an aftermarket model. Alas, the aftermarket dash kit and wiring adapter that works just fine in the sedan and coupe models just isn’t compatible with the wagon.

That said, we know there are upgrades that will require you to access the back of the factory radio, so the necessary disassembly instructions are included in the Crutchfield ResearchNotes™ that we include free with your order.

To learn more about upgrading your sound while keeping the factory radio, check out this helpful guide to sound processors. If you have more questions, give us a call and talk to one of our expert Crutchfield Advisors.

Tools needed: Panel tool, 7mm socket, ratchet and extension, clean shop rag

Cadillac CTS sport wagon speaker removal

Upgrading the speakers is the best way to improve your Sport Wagon's sound (Crutchfield Research Photo)

Removing the factory speakers

The best way to improve your car's sound is with new speakers all around. The work isn't always easy in this wagon, but Crutchfield’s illustrated disassembly instructions will help you get it done.

cadillac CTS sport wagon center dash speaker

The center dash speaker is easy to get to. (Crutchfield Research Photo)

Removing the center dash speaker

All CTS Sport Wagons, regardless of the stock system, have a 3-1/2-inch center dash speaker that’s pretty easy to reach and replace. Starting at the top edge, use a panel tool to pry out the pillar trim panel and release two clips. Push the retainer strap in to release it, then lift the trim panel and remove it. Next, you’ll repeat these steps on the opposite side of the vehicle.

Pry up along the rear edge of the grille/vent panel on top of the dash to release ten clips, then disconnect the harness and pull the panel toward the rear of the car to remove it. Remove the two 7mm screws securing the speaker to the dash, then disconnect the harness and remove the speaker.

You can use the factory speaker grille to cover the new speaker, but a wiring harness is not available. You'll need to splice, solder, or use Posi-Products speaker connectors to connect the new speaker to the car’s wiring.

Tools needed: Panel tool, 7mm socket, ratchet and extension

cadillac CTS sport wagon corner dash speaker

Once you've gotten to the center dash speaker, you might as well replace the corner speakers, too. (Crutchfield Research Photo)

Removing the corner dash speakers

The base system sports a pair of small corner dash tweeters, while the upgraded system ups the ante with a pair of 3-1/2-inch speakers. Getting to these speakers is pretty easy, and if you decided to replace the center dash speaker, you’re already most of the way there. Once that dash panel is out of the way, all you have to do is remove the two 7mm screws securing the speaker, disconnect the harness, and remove the speaker.

Regardless of what you’re replacing, the factory locations will accept 3-1/2-inch speakers. If you’re installing new tweeters, you might be able to get away with modifying and reusing the stock brackets, but you’ll probably need a set of our universal backstraps. They’re not at all expensive, so it’s probably best to toss a set into your cart just in case. They have other uses, too!

If you’re upgrading the corner speakers in a CTS equipped with the Bose 5.1 system, there’s no wiring harness available, so you’ll need to splice, solder, or use Posi-Products speaker connectors.

Tools needed: Panel tool, 7mm socket, ratchet and extension, hole saw bit (if modifying stock brackets only)

cadillac CTS sport wagon front door speakers

You'll find a woofer behind each front door panel (Crutchfield Research Photo)

Removing the front door woofers

Both of the factory Bose systems includes subwoofers in the front doors. These speakers can be replaced by a variety of 5-1/4-inch or 6-1/2-inch speakers, but be advised that these speakers only receive bass frequencies from the stock amplifier. If you plan to use the factory amp going forward, anything you install here will only reproduce bass frequencies.

You’ll need to remove the door panels to access these speakers, and while that’s not hard, there are some minor process differences depending on what you’re starting with. You can find all the details in your Crutchfield disassembly instructions.

With the Bose 5.1 system, you’ll need to use mounting brackets to install the new speakers, and you’ll need to drill new mounting holes for the brackets. This isn’t hard, but work carefully, know what you’re drilling into, and definitely wear eye protection.

Once your speakers are connected and secured, you’ll want to test them before you put the doors back together. Also, check that the wires do not interfere with window operation and test the door lock and release operation. If all is well, start putting the doors back together.

Tools needed (Bose 5.1): Panel tool, #3 Phillips screwdriver, 7mm socket, ratchet and extension, drill and 1/8-inch bit

Tools needed (base Bose): Panel tool, #2 and #3 Phillips screwdrivers, small flat blade screwdriver, 1/4-inch and 7mm sockets, ratchet and extension, pliers

cadillac CTS sport wagon rear door speakers

The rear door speakers are attached to the door panels (Crutchfield Research Photo)

Removing the rear door speakers

In the rear doors, you’ll find 5-1/4-inch speakers, regardless of system. To remove them, you’ll start by prying out the screw cover behind the door release handle. This will expose a #2 Phillips screw, which you’ll need to remove.

Pry off the door pull handle cover, then remove two exposed #3 Phillips screws. The door pull handle cover will remain tethered to the door panel while you’re doing this, by the way.

Pry out the sides and bottom of the door panel to release the retaining clips, then disconnect the release cable, remove the door panel. Store it someplace safe and dry while you keep working.

Finally, you’ll remove the four Torx T15 screws securing the speaker to the door panel, then disconnect the harness and remove the speaker.

Once the new ones are connected and secure, test them out before you put the doors back together. Make sure the doors, locks, and windows are working properly before you finish up.

Tools needed: Panel tool, #2 and #3 Phillips screwdrivers, small flat blade screwdriver, Torx T15 driver, needle-nose pliers

cadillac CTS sport wagon rear pillar speakers

The rear pillar speakers are very easy to reach and remove (Crutchfield Research Photo)

Removing the rear pillar speakers

Sport Wagons equipped with the Bose 5.1 system include 2.475-inch tweeters in the rear pillars. These speakers are pretty easy to get to, but you’ll need to use hot glue, silicone, or our universal backstraps to secure your new speakers. There’s also no wiring harness available, so you’ll need to splice, solder, or use Posi-Products speaker connectors back here.

The disassembly process begins with prying open the screw cover on the rear pillar trim panel, then removing the exposed 7mm screw. Next, pry off the rear pillar trim panel to release the clips, then disconnect the harness and remove the trim panel. Remove the five Phillips screws securing the speaker and grille to the rear pillar trim panel, then remove the speaker and grille.

Tools needed: Panel tool, Phillips screwdriver, small flat blade screwdriver, 7mm socket, ratchet and extension

cadillac CTS sport wagon rear sub

The Bose sub fits into an enclosure that fits into the spare tire (Crutchfield Research Photo)

Removing the spare tire subwoofer

The Sport Wagon’s Bose 5.1 system also includes a 6-1/2-inch subwoofer mounted in an enclosure attached to the spare tire under the cargo floor. Pay no attention to the size of the stock sub, though. When you replace it, a 5-1/4-inch model is the largest aftermarket size that will fit. And to make that new speaker sits flush in the enclosure, you'll need to make a mounting bracket and cut or break off two locator pins.

On the upside, it’s easy to get to. Lift the cargo floor panel up and fold it underneath the cargo cover, then lift the spare tire cover up and remove it. Disconnect the enclosure harness, then unscrew the spare tire retainer and remove the retainer.

Next, lift the subwoofer enclosure up and remove it. Remove the eight 1/4-inch screws securing the enclosure top to the enclosure, then remove the top. Remove the four 1/4-inch screws securing the sub to the enclosure, then pry up the sub and disconnect the speaker wires before removing it.

Tools needed: 1/4-inch socket, ratchet and extension, pliers, utility knife

Read our Car Speakers Buying Guide for more information

Shop for speakers that fit your Cadillac CTS Sport Wagon

cadillac CTS sport wagon cargo area

There's plenty of space for bass in the Sport Wagon's cargo area (Crutchfield Research Photo)

More bass in your CTS Sport Wagon

At the risk of being a bit obvious, there’s a decent amount of space in the Sport Wagon’s cargo area. That space comes in handy for people, pets, and stuff, but it can also be useful for those who like big bass performance.

There's a 36"W x 12"H x 32"/37"D (top and bottom) space for a subwoofer enclosure back here, but the bigger the box, the smaller the cargo area. There's also plenty of room for a smaller sub that can be disconnected when you need more space. It's a nice mix of pounding sound and practicality.

If you’re not a total basshead but still want to get more from your music, a more compact powered sub might be the right solution for your CTS Sport Wagon.

Learn more about building a bass system in our Car Subwoofer Buying Guide.

weathertech floorliners

Protect your Caddy's carpeting with a set of custom-fit WeatherTech FloorLiners

Other options for your CTS Sport Wagon

There are plenty of other ways to improve your CTS Sport Wagon. Here are just a few of them:

Protect the carpeting with floor mats

It's easier than you think to mess up your Caddy's comfy interior while you're going about your daily business. Custom-fit floor mats from WeatherTech will help protect your floors from dirt and damage.

Add an amp (or two)

A new 4-channel amplifier will help you get the most out of your new speakers. You'll get cleaner power (and a lot more of it), which will result in much, much better sound. A mono amp can provide the juice you need for your new subwoofer, too. You can learn more about adding amps to your car's system in our Car Amplifier Buying Guide.

Dynamat

The Dynamat 10435 Xtreme Door Kit is the perfect way to seal in sound. This heavy-duty insulating material is easy to install, and it really makes a difference. One kit should take care of the front doors.

Remote start and security systems

You can also talk to your Crutchfield Advisor about a security system. They’re not as easy to install (we usually suggest letting a professional do the job), but we can help you choose a system that’ll work in your vehicle.

Let's get started!

Ready to shop? Use our vehicle selector to find the gear that will fit your car or truck. If you have questions of your own, give us a shout via phone or chat.

Find what Fits your vehicle

Remove
Additional vehicle options are required. Select the options button to finish selecting your vehicle.

Checking fit...