About the Sanus Classic MSF07c
A tilting, swiveling mount for small TVs and monitors
A tilting, swiveling mount for small TVs and monitors
The full-range Sanus Classic MSF07c mount gives you plenty of options for positioning your TV. It can hold it close to the wall, or extend it outward up to 7-3/16". You can swivel the TV left or right up to 45° and tilt it up or down as far as 12° for optimal viewing. The mount's brackets can easily be shifted to the right or left, in case the wall studs are a little off-center. The MSF07c can support a TV or monitor with a screen size up to 32", and a weight of up to 35 lbs.
Will this mount work with my TV?
Use the Sanus MountFinder™ to see a list of mounts that work with your specific TV.
Where do I drill the holes?
Tell the Sanus HeightFinder™ Installation Assistant how high you want your TV, and it tells you exactly where to drill.
Product highlights:
- fits most flat-panel TVs and monitors from 13"-32"
- heavy-gauge steel construction
- supports up to 35 lbs.
- extends TV up to 7-3/16" from wall
- swivel range: ±45°
- tilt range: ±12°
- stud-mounting required
- movable brackets for off-center stud placement
- includes all necessary hardware
- conceals cables for a neat on-wall TV installation
- 8-13/16"W x 8-7/8"H x 3"D (with arm retracted)
- warranty: 5 years
- MFR # MSF07c-B1
What's in the box:
Sanus Classic MSF07c owner's manual
- TV wall-bracket assembly
- 2 Extender brackets
- Four M4 x 12mm bolts
- Four M4 x 35mm bolts
- Four M5 x 12mm bolts
- Four M5 x 35mm bolts
- Four M6 x 12mm bolts
- Four M6 x 35mm bolts
- Four M4/M5 washers
- Four M6 washers
- 4 Spacers
- Two 5/16" x 2-3/4" lag bolts
- 4 Hex-nuts
- 7/32" Hex-key
- Instruction Manual
Reviews (24)
Customer reviews for Sanus Classic MSF07c
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Sanus Classic MSF07c
Features & specs
| Features | ||
|---|---|---|
| Mount Type | Wall Mount | |
| Motion | ||
| Tilt | Yes | |
| Swivel | Yes | |
| Extend/Retract | No | |
| Fixed | No | |
| Roll (Level) Adjustment | No | |
| Mounting Details | ||
| Wood Stud (Single) | Yes | |
| Wood Stud (Dual, 16-inch) | No | |
| Wood Stud (Dual, 24-inch) | No | |
| Concrete Block-compatible | Yes | |
| Recessed Housing | No | |
| Outdoor-rated | No | |
| Motorized | No | |
Product Research
Features
TV Capacity: The Sanus Classic Series MSF07c wall-mount bracket is designed to support flat-panel TVs from 13" to 32", weighing up to 35 lbs.
VESA Bolt Pattern: The Sanus MSF07c wall-mount bracket accommodates a horizontal hole spacing on back of the TV of 75mm-200mm and a vertical hole spacing of 75mm-200mm. The MSF07c comes with M4, M5, and M6 size bolts of differing lengths to mount the bracket to your TV. It will accommodate the following VESA hole patterns in accordance with industry standards set by the Video Electronics Standards Association:
- 75mm x 75mm
- 100mm x 100mm
- 200mm x 100mm
- 200mm x 200mm (included extension brackets must be used)
Full-Motion Design: The Sanus Classic Series MSF07c full-motion, wall-mount bracket provides 4-points of movement for an optimal viewing position. The MSF07c extends from the wall (3"-7.1875"), tilts up/down (+10°/-20°), swivels left/right (+/-45°), and pans left/right (+/-90°) for easy viewing anywhere in the room.
Note: When choosing a location for your TV on the wall, please keep in mind that the TV will shift 4.75" from the Extended to the Home positions (see Instruction Manual).
Construction: The MSF07c bracket is constructed of heavy-gauge steel with a durable powder-coated black finish. This solid construction provides strength and increased safety.
Wall Plate: The integrated wall plate must be mounted to a single wall stud using the supplied lag bolts.
Installation Tools: The following tools are recommended for mounting the MSF07c:
- Tape measure
- Stud finder
- Awl
- Level
- Drill
- 7/32" Drill bit (for wood stud)
- 1/2" Socket wrench
- 3/8" Box wrench
- Screw driver
Loading accessories...
Customer Q&A
Loading articles...
Product is well made and heavy duty. Comes with all the necessary hardware for mounting to wall studs.
Steve P. from Virginia