About the Focal ES 165 K2E

Product highlights:
- component speaker system includes two 6-1/2" woofers, 2 tweeters, 2 external crossovers, and hardware
- K2 aramid fiber sandwich woofer cone
- Tuned Mass Damper (TMD®) butyl rubber surround
- TKME "M"-shaped inverted-dome tweeter made of aramid fiber
- 2-way external crossover with tweeter, woofer, and crossover slope settings and bi-amp inputs
- 2-ohm impedance
- power handling: 100 watts RMS (200 watts peak power)
- frequency response: 60-22,000 Hz
- sensitivity: 93 dB at 2.83V
- woofer top mounting depth: 2.94"
- woofer and tweeter grilles included
- flush- and surface-mount tweeter brackets included
- warranty: 1 year
- MFR # ES165K2E
- Item # 091ES16K2E
What's in the box:
Focal ES 165 K2E owner's manual
If you need assistance accessing this owner's manual, please give us a call.- Two woofers
- Two inverted dome tweeters (with attached 18" length of speaker wire)
- 2 Crossovers
- 2 Tweeter flush trim rings (installed)
- 2 Tweeter angled surface mount cups
- 2 Dome protective washers
- 2 Tweeter grilles (installed)
- 2 Woofer grilles
- 2 Woofer grille mounting rings
- 2 Woofer gaskets
- 8 Speed clips
- Four 3/4" Screws
- Eight 1-1/8" Screws
- Quick start guide
- 2 Focal window stickers
Featured video:
More details on the Focal ES 165 K2E

Features & specs
General | ||
---|---|---|
Speaker Size | 6 1/2 | |
Driver Design | 2-way | |
Woofer Design | Cone | |
Woofer Material | Aramid Fiber/Glass/Kevlar | |
Woofer Surround | Butyl Rubber | |
Midrange Design | --- | |
Midrange Material | --- | |
Tweeter Design | M-Shaped Inverted Dome | |
Tweeter Material | Aramid Fiber | |
Super Tweeter Design | --- | |
Super Tweeter Material | --- | |
Impedance (Ohms) | 2 | |
Weather-resistant | No | |
Grilles Included | Black, Steel mesh, Plastic frame | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | N/A | |
Sensitivity at 2.83 volts | 93 | |
Frequency Response | 60 - 22k Hz | |
Maximum RMS Wattage | 100 | |
Peak Power Handling (Watts) | 200 | |
Top-mount Depth (Inches) | 3 | |
Bottom-mount Depth (Inches) | 3 1/8 | |
Cutout Diameter or Length (inches) | 5 5/8 | |
Mounting Height (Inches) | 0.414 | |
Frame Width | 6.492 | |
Frame Length | 6.492 |
Product Research
Features
Size Classification Note: Some manufacturers, including Focal, call this size speaker a 6½. Because it requires a larger cutout than a standard 6½ speaker, Crutchfield has traditionally referred to this size woofer as a 6¾. Please enter your vehicle information to confirm fit.
Phase Plug: The bullet-shaped phase plug in the center of the woofer ensures a smooth, flat off-axis frequency response by preventing the high frequency sound waves emanating from one side of the cone from interfering with sound waves from the other side of the cone.
Tweeter Mounting Options: The tweeters can be surface or flush mounted using the included adapters, or the trim rings can be removed and the protective washers added for mounting in a factory tweeter location. The included angled cup allows surface mounting at one of two angles; approximately 60° and approximately 40°.
Mounting Dimensions:
Flush Mount | Surface Mount 40° | Surface Mount 60° | |
---|---|---|---|
Mounting Height | 0.381" | 1.71" | 1.98" |
Mounting Depth | 0.437" | screw depth | screw depth |
Frame Diameter | 2.041" | N/A | N/A |
Cutout Diameter | 1.575" | N/A | N/A |
Frame Width | N/A | 2.075" | 2.075" |
Frame Depth | N/A | 2.125" | 1.957" |
Crossovers: The crossover inputs and outputs are set screw terminals; they will accept bare wire to 10-gauge. The high-pass crossover slope is 12 dB/octave; one switch allows you to adjust the output level of the tweeter to -3 dB, 0 dB, or +3 dB, a second switch turns the tweeter "shelf" on/off (high-frequency boost designed to improve definition). Another switch allows you to choose between 12 dB/octave and 6 dB/octave slopes for the low-pass crossover. The crossover point for both is 3,500 Hz. Each crossover also has bi-amp inputs, one input for the tweeter and one for the woofer. When using only two amplifier channels the crossover inputs must be shorted together using two short pieces of speaker wire. Focal recommends using four amplifier channels to bi-amp the speakers for the improved dynamic range and to present an easier load for the amp(s) to drive.
Crossover Dimensions:
- Width:5⅞"
- Height: 1⅞"
- Depth:4"
The Focal ES 165 K2E replaces these items:
- component speaker system includes two 6-1/2" woofers, 2 tweeters, 2 external crossovers, and 2 woofer grilles
- 2-ohm impedance
- power range: 6-100 watts RMS (200 watts peak power)
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...