Metra 82-8153 Speaker Mounting Brackets

Perfect fit

Have questions for
?

Crutchfield response on

Metra 82-8153 Speaker Mounting Brackets

Not whay I need.

Have questions for
?

Crutchfield response on

Fitment issues, but easy to resolve.

They did not fit my 04 Sequoia with JBL Audio (fronts). I had to dremel out the top hole to mount all 3 screws

Have questions for
?

Crutchfield response on

Metra 82-8153 Speaker Mounting Brackets

Perfect fit!

Have questions for
?

Crutchfield response on

Metra 82-8153 Speaker Mounting Brackets

Didn't fit. Had to drill out the holes to match screw holes. Speaker didn't fit either. Speakers too small in opening.

Have questions for
?

Crutchfield response on

Perfect moints for 6.5" soeakers

2014 4 Runner tailgate location for 6.5" coaxial speakers. 2 of the three mounting holes matched. Third one needed to be drilled to line up. Reason for purchasing these mounts: they actually fit 6.5" speakers. The one that was sent to me originally does not fit 6.5"

Have questions for
?

Crutchfield response on

Nice product

Very helpful with the install

Have questions for
?

Crutchfield response on

NO HARDWARE INCLUDED

You will need to figure out your own way to mount the brackets, ill be spending a couple days with no speakers and door panels while i wait till stores are open to grab some hardware. they DO NOT come with fastners or instructions, it has ONLY the plastic brackets. not the end of the world but sure does kinda put a damper on what i thought was a 15 minute job turned multi-day ordeal.. the holes dont line up great either, but that too isnt a big deal with the help of a drill and some creativity.

Have questions for
?

Crutchfield response on

Metra 82-8153 Speaker Mounting Brackets

plug and play simple install Worked perfectly for mounting the new speakers in my 2006 Tundra double-cab front doors. Could not have been more simple.

Have questions for
?

Crutchfield response on

Metra 82-8153 Speaker Mounting Brackets

Worked just fine

Have questions for
?

Crutchfield response on

Metra 82-8153 Speaker Mounting Brackets

Perfect fit for an 04 tundra DC

Have questions for
?

Crutchfield response on

Metra 82-8153 Speaker Mounting Brackets

Lots of plastic! Sounds poor quality

Have questions for
?

Crutchfield response on

Metra 82-8153 Speaker Mounting Brackets

Great fit to original location. Could use an up arrow to Aide, but simple install

Have questions for
?

Crutchfield response on

Metra 82-8153 Speaker Mounting Brackets

Worked well for my 2006 Toyota Tundra and fit like a glove.

Have questions for
?

Crutchfield response on

Good Brackets

These are the better brackets available out there that fit the toyota opening on my sequoia. Other brackets are available elsewhere, but they are not near as thick. Also watch out, there's two different toyota adapters available and one is TOO SMALL! So don't be like me and think they are all the same! These guys ship it all to you for free when you buy your speakers, so what excuse do you have?

Have questions for
?

Crutchfield response on

No Brainer.

These brackets are a No Brainer. They are a perfect fit for my 2002 Sequoia. Makes installing replacement speakers a breeze. These are needed to space the speaker far enough out to clear the window. The only thing that should be added is foam for the back of the adapter and for the back of the speaker to aide in a vibration free installation. I added window sill foam that I purchased myself.

Have questions for
?

Crutchfield response on

Almost compatible with 1st Gen Tundra

Despite being the correct P/N for my 1st gen Tundra Crew cab, I had to customized them both to fit the speakers I purchased and mount them to the door of the truck. Having to modify and fit these extended install time by about an hour but they worked well once I got them customized.

Have questions for
?

Crutchfield response on

Adapter not very good

Speakers are very good. The mounting adapters are not very good. I have a 2006 Tundra with the Jbl stereo system(has the midrange speaker beside the woofer at bottom of front doors). The new adapters only accommodate the woofers and you lose the midrange speakers unless you physically modify a combination of the factory adapter and the supplied adapter to fit the new woofer and the factory midrange. The new woofers are not capable of reproducing good midrange so eliminating the midrange speakers makes the system sound poorly so you have to do a lot of work to preserve the midrange. These adapters do not make the installation remotely easy.

Have questions for
?

Crutchfield response on

Perfect fit

Perfect fit

Have questions for
?

Crutchfield response on

Installation needs adaptation

The Crutchfield supplied Metra 82-8148, and Metra 82-8153 Speaker Mounting Brackets 10mm screw holes did not aligned with any of the 2004 Toyota Sequoia original doors panels screw holes. The four pieces (front and rear) reduce to two footprints types and neither aligned in any of the doors. You could screw in one but the remaining two screw holes are off center. Careful and difficult tweaking was required to modify or drill new holes. Adding insult to injury, the supplied screws to mount the speakers to the brackets are either too long (screw sharp tip protrudes and may scratch the car door mounting location paint) or too thin (threads slips and does not screws in securely, solved by shimming the screw hole with a thin piece of a red plastic straw, see the pictures). The real labor was carefully dismantling the doors panels to reach the speakers locations. Once you are there and find the supplied brackets labeled for 2001-2007 Toyota Sequoia did not matched was disheartening. With a dismantled truck, returning merchandise, waiting for the correct part (if you had others for non JBL Sequoias 2004) and calling Crutchfield for lip service was not an option. I hope to open your eyes to investigate the cause this brackets did not fitted as advertised. With your experience I doubt this is an unusual occurrence.

Have questions for
?

Crutchfield response on

Metra 82-8153 Speaker Mounting Brackets

The holes didn't line up perfectly but with some bending they worked out. I also had to cut out the rectangle pieces for the speaker to fit flush. No instructions provided either.

Have questions for
?

Crutchfield response on

Metra 82-8153 Speaker Mounting Brackets

They do what there suppose to do.

Have questions for
?

Crutchfield response on

Metra 82-8153 Speaker Mounting Brackets

Worked great

Have questions for
?

Crutchfield response on

Metra 82-8153 Speaker Mounting Brackets

Wrong for my car.

Have questions for
?

Crutchfield response on 5/24/2021

This customer contacted our Customer Support team and set up a return. Purchases from Crutchfield can be returned or exchanged within 60 days.

Easy install

Made the install easy

Have questions for
?

Crutchfield response on

Metra 82-8153 Speaker Mounting Brackets

Made installtion super easy!

Have questions for
?

Crutchfield response on

Metra 82-8153 Speaker Mounting Brackets

These worked well for the front door speakers in my 2006 Tundra DC. Only two of the three holes lined up with the original holes, but there is enough meat on the bracket for the hole the doesn't line up to drill another hole so it lines up

Have questions for
?

Crutchfield response on

works as it should.

perfect fit, no problems

Have questions for
?

Crutchfield response on

Works... with modification (04 Tundra)

Used in a 2004 Tundra double cab for the front. The brackets fit with the speakers, but only to get them to fit the Tundra you have to modify the screw holes; the top one we had to drill out to be higher. I've used a handful of metra mounting brackets in the past and this always seems to be the case; some modification is needed to make it fit. These are very hard plastic so you will need a dremel or drill to bore them out.

Have questions for
?

Crutchfield response on

Metra 82-8153 Speaker Mounting Brackets

Made installation of my JBL Club 622 into my 2006 Sequoia a breeze!

Have questions for
?

Crutchfield response on

Metra speaker bracket

Good quality

Have questions for
?

Crutchfield response on

Great Bracket

Worked perfect with my Infinity speakers on the front door of my 2005 Sequoia

Have questions for
?

Crutchfield response on

Metra 82-8153 Speaker Mounting Brackets

Used with Kicker 6 3/4" speakers for 2005 Toyota Sequoia front door. Holes do not line up and needed to expand upper hole for all three screws to work. Also, needed to remove inner tabs to allow speaker to fit. Mounted midrange with one screw on top of the woofer after installed. worked well. Used foam (not included) between door and bracket and under speaker. Worked, but needed modifications.

Have questions for
?

Crutchfield response on

Metra 82-8153 Speaker Mounting Brackets

Great fit for my 2005 Tundra's front doors. The screw holes were slightly off but got it to work with no issues.

Have questions for
?

Crutchfield response on

Metra 82-8153 Speaker Mounting Brackets

These do not match up. New holes had to be drilled to use.

Have questions for
?

Crutchfield response on

Metra 82-8153 Speaker Mounting Brackets

They fit.

Have questions for
?

Crutchfield response on

Poorly matched adapter bracket & speakers.

Hole centers for this adapter are 6 1/4". The companion speakers ( Rockford Fosgate R1675X2 6-3/4" 2-way Speakers Item #575R1675X2) don't fit with 6 1/2" hole centers. The work around is to clock the speaker a bit & drill new holes in the supplied adapter bracket. Oh, plus a trip the the hardware store for a fist full of #8 machine screws & nuts. A real time burner.

Have questions for
?

Crutchfield response on

Metra 82-8153 Speaker Mounting Brackets

Worked & fit with minor modifications, had to grind off the tabs but that was expected.

Have questions for
?

Crutchfield response on

Metra 82-8153 Speaker Mounting Brackets

I gave these a 3 star rating because the mounting holes didn't exactly line up with the factory holes. I had to slightly bend it to make it work so I used a file and made them work correctly. I was expecting them to line up perfectly but I guess that's not how it's supposed towork.

Have questions for
?

Crutchfield response on

Metra 82-8153 Speaker Mounting Brackets

Worked great.

Have questions for
?

Crutchfield response on

Austin successful install

After some customization, I was able to mount the speakers. Holes didn't line up to the door and screws were too small

Have questions for
?

Crutchfield response on

Metra 82-8153 Speaker Mounting Brackets

These brackets are great. Worked perfect for my application. Highly reccomend

Have questions for
?

Crutchfield response on

Modification needed on 2005 Tundra

These got the job done but not without having to modify them to get them to fit into the door. Was also only able to secure 2 or three 3 screws into the door.

Have questions for
?

Crutchfield response on

I love you guys

Very happy with my product I even bought additional speakers and it came with with everything I needed extra wires brackets everything I'm very happy with you guys thank you so much

Have questions for
?

Crutchfield response on

Little modification and they work

Good brackets with alot of options but did need to modify. On my 06 Tundra double cab front speaker had to wallow hole on top hole. Also no instructions so just had to think a little. Did find speaker was not sitting correctly and realized I had to wiggle interior fingers and break them off.

Have questions for
?

Crutchfield response on

Metra 82-8153 Speaker Mounting Brackets

Adapters worked well. Had to break off the inner tabs to make the speakers fit flush. Would have been nice if they had provided some foam tape for a better vibration free connection.

Have questions for
?

Crutchfield response on

Metra 82-8153 Speaker Mounting Brackets

These work very well as replacements (not additions) to the factory mounts

Have questions for
?

Crutchfield response on

Tundra with JBL

It's difficult to find replacement Speakers for a tundra with a factory JBL system. These adaptors did work but required some modification. Over all I'm happy with the install.

Have questions for
?

Crutchfield response on

Metra 82-8153 Speaker Mounting Brackets

good fit for the 05 tundra where we removed the JBL system these were needed to make the new Kenwood speakers fit with no gaps easy to use and install

Have questions for
?

Crutchfield response on

Dremel Tool Mandatory

These absolutely did not fit my vehicle, I had to modify them entirely to get them to fit with a Dremel tool and even then, they still didn't fit 100% properly.

Have questions for
?

Crutchfield response on

Metra 82-8153 Speaker Mounting Brackets

Not a direct fit but we made them work. Can't beat the price though.

Have questions for
?

Crutchfield response on

Metra 82-8153 Speaker Mounting Brackets

We thought the new speakers might not fit but again Crutchfield knew what we needed for my vehicle to make everything work. Thanks Crutchfield

Have questions for
?

Crutchfield response on

Metra 82-8153 Speaker Mounting Brackets

Good fit.

Have questions for
?

Crutchfield response on

Not really right for 1st gen Sequoia with 8 speaker JVC

After my factory front speakers blew out for the second time, I figured it was time to completely replace them instead of repairing again. I didn't want to have to do much research so I went to Crutchfield. If the Toyota Sequoia only had a single 6.5 inch speaker up front then this bracket and the wiring harness that Crutchfield so generously provides would work fine. However, the Sequoia also has a midrange speaker in front to be accounted for because the 6.5" speaker is a woofer and only receives lower frequencies through its designated wire pair. The new 6.5" speakers that I bought along with the mounting bracket and harness installation could work, with the exception of the midrange speaker left dangling because the harness and mount do not account for it. I called tech support and got a technician who told me to simply cut the midrange speaker off because it wasn't necessary since the new speaker was full range. This was bad advice because as soon as I did that, I lost all midrange and the speaker now functioned only as a woofer. I had to splice the midrange speaker wires to reconnect it and had to improvise a mount for it. If this mounting bracket had a place to mount the factory midrange then everything would have worked perfectly. Alternatively if the wiring harness and circuitry could somehow consolidate the original 2 wire pairs (1 pair for woofer and 1 for midrange) into a single pair that carried lows and mids then it would have worked as

Have questions for
?

Crutchfield response on

Metra 82-8153 Speaker Mounting Brackets

They fit well and feel solid. I feel the price was good also

Have questions for
?

Crutchfield response on

Metra 82-8153 Speaker Mounting Brackets

Fits great

Have questions for
?

Crutchfield response on

Metra 82-8153 Speaker Mounting Brackets

Excellent product fit was on the money extremely satisfied

Have questions for
?

Crutchfield response on

Metra 82-8153 Speaker Mounting Brackets

Speaker mounts were the wrong ones. They didn't fit the speakers and didn't match up to my vehicle either.

Have questions for
?

Crutchfield response on

Satisfied

True to form. Great solution

Have questions for
?

Crutchfield response on

Metra 82-8153 Speaker Mounting Brackets

Came free with the speakers so can't complain about price. And the exact bracket I needed to replace the door speakers in my 2006 Tundra with the factory JBL system.

Have questions for
?

Crutchfield response on