Chat
Contact us
Close contact box
Connect ID #
556 102 428 4
Connect ID #
556 102 428 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

EFX 10-gauge Amplifier Wiring Kit Power and signal connections for your new amp

Item # 142PA10

Make sure you enjoy the full potential of your new amplifier by hooking it up with quality power and signal...

Make sure you enjoy the full potential of your new amplifier by hooking it up with quality power and signal...

Item # 142PA10

About the EFX 10-gauge Amplifier Wiring Kit

Ken Nail
Make sure you enjoy the full potential of your new amplifier by hooking it up with quality power and signal connections.

This wiring kit does not include speaker wire, so you'll need to purchase that separately to complete your amp installation. This kit includes patch cables for a 2-channel or mono amp — you'll need to add cables for multi-channel amps.

Make sure you enjoy the full potential of your new amplifier by hooking it up with quality power and signal connections.

This wiring kit from EFX includes 10-gauge power and ground cables, a stereo RCA audio cable, and all the accessories you'll need to connect your new amp. Just add whatever speaker wire you need, and you're ready to go. Designed for amplifiers with a fuse rating of up to 30 amperes.

READ LESS

Product highlights:

  • amplifier wiring kit with power, ground, and audio connections
  • 17-foot blue 10-gauge power cable
  • 4-foot silver 10-gauge ground cable
  • 17-foot blue remote turn-on lead
  • 17-foot twisted pair patch cable with EFX-2 RCA connectors
  • 30-amp ATC blade fuse and in-line fuse holder
  • 6 feet of flex loom
  • assorted crimp-on connectors and wire ties
  • warranty: 1 year (no warranty on fuses)
  • MFR # 142PA10

What's in the box:

  • 17' Stereo RCA interconnect cable
  • 17' Ten-gauge blue power cable with in-line fuse holder and ring terminal on end near fuse holder
  • 30 amp ATC (blade) fuse
  • 4' Ten-gauge silver ground cable with ring terminal on one end
  • 17' Eighteen-gauge blue remote turn-on wire
  • 6' Length of flex loom
  • 6 Plastic wire ties
  • Red 10-gauge crimp-on ring terminal
  • 2 Red 18-gauge crimp-on spade connector
  • 1 Plastic grommet
  • 1 Red butt connector
  • "Scosche" sticker
  • Instructions

Customer reviews for EFX 10-gauge Amplifier Wiring Kit

Loading reviews...

Average review:

4.5 out of 5 stars
215 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Crutchfield response
Customer provided image, click to load a larger version.
<< >>

More details on the EFX 10-gauge Amplifier Wiring Kit

Mark G.
The EFX 10-gauge Amplifier Wiring Kit replaces these items:

Product Research

Features

Compatibility: The PA10 kit is designed for amplifiers with fuse ratings up to 30 amps.

Kit Contents:

  • 17-ft Stereo RCA interconnect cable
  • Waterproof in-line fuse holder with 10-gauge power cable attached (width: 1.135", height: 1.365", depth: 0.522")
  • 30-amp ATC fuse
  • 17-ft 10-gauge blue power cable, with fuse holder in-line and a ring terminal on the same end as the fuse holder (0.551" outer diameter, 0.315" inner diameter)
  • 4-ft 10-gauge silver ground cable with ring terminal on one end (0.551" outer diameter, 0.315" inner diameter)
  • 17-ft 18-gauge blue remote turn-on wire
  • 6-ft length of flex loom (0.40" diameter)
  • 6 Plastic wire ties (zip ties, 3-7/8" long)
  • 10-gauge crimp-on ring terminal with a red insulator boot (0.551" outer diameter, 0.315" inner diameter)
  • Two 18-gauge crimp-on spade connector with red insulator boots (0.262" outer width, 0.166" inner width)
  • 1 Plastic grommet
  • 1 Red butt connector
  • Scosche sticker
  • Instructions

Note: All power cables have Oxygen-free high-conductivity wire for maximum power flow.

Loading accessories...

Customer Q&A

Loading articles...

Compare the sound