About the Kicker 48DCVR122
Great subs, great sound
Great subs, great sound
When it comes to great subwoofers, Kicker has been there from the beginning. Now they've mounted two of their 12" CompVR subs in a rugged ported enclosure to rock your ride. The subs feature a tough, injection-molded polypropylene cone with a Santoprene™ rubber surround to pump out the low end. The unique SoloKon™ cone with its 360-degree back bracing holds up under pressure, and its perimeter-vented basket combines with Kicker's UniPlate™ speaker design to keep things cool when the music's hot. These tough subs handle up to 800 watts RMS, so be sure your amplifier delivers the power they need. The enclosure's 2-ohm impedance draws maximum power from your mono amp.
The enclosure is made of rugged MDF with a stylish black carpet covering and an embroidered Kicker logo. Its front-facing port maximizes the bottom end and delivers the punch you expect from Kicker. Load your trunk or cargo area with this bad boy and you'll be rocking the block with maximum bass and minimum fuss.
- ported enclosure with two 12" CompVR subwoofers
- medium-density fiberboard construction covered with carpet
- 2-ohm impedance
- power handling: 800 watts RMS (1600 watts peak power)
- frequency response: 25-500 Hz
- sensitivity: 98 dB
- 32.5"W x 16"H x 17"D1 x 14"D2
- warranty: 1 year
- MFR # 48DCVR122
What's in the box:
- Ported enclosure loaded with two 12" CompVR subwoofers
- 4 Mounting brackets
- Four 1" Pan head screws
- Eight 3/4" Flat head screws
- Specification chart
- Kicker Tech Support information
Customer reviews for Kicker 48DCVR122
Average review:5.0 out of 5 stars
Thanks for submitting your review
More details on the Kicker 48DCVR122
Features & specs
|Woofer Size (inches)||12|
|Speakers Per Box||2|
|Pieces in System||1|
|Connector Type||Spring posts|
|Frequency Response||25-500Hz Hz|
|Power Range (Watts RMS)||800|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
Woofers: The Kicker 48DCVR122 enclosure uses two 12" CompVR series subwoofers. Each Kicker subwoofer features an injection-molded polypropylene cone with a Santoprene surround. The surround and cone are attached using Kicker's signature red double stitching, providing an outstanding bond.
Enclosure: The ported enclosure is made of heavy-duty MDF (Medium Density Fiberboard) with extensive internal bracing, providing exceptional acoustic efficiency and deep powerful bass. The enclosure is covered in sleek black carpeting for added protection and a refined look.
Forced Air Cooling: Kicker uses their SoloKon technology to join the cone to the vented back brace, creating a single integrated unit. This forces air through the motor assembly allowing it to run 25% cooler and helping eliminate distortion. Perimeter venting allows air to circulate around the base of the cone, while Kicker's UniPlate system helps redirect heat away from the motor.
Speaker Terminals: A single pair of spring posts are mounted on the back of the enclosure and will accept pin connectors, single banana plugs, or bare wire up to 10-gauge in size.
Power: The dual CompVR subwoofers can handle 400-800W RMS (1600W peak), and are wired for a 2Ω load at the single pair of spring posts.
Break-in Period: Due to the complex nature of Kicker CompVR speakers, they require a break-in period in order to produce optimum low-bass response. The suspension system is very stiff out-of-the-box. Approximately two weeks of daily playing will allow the suspension to break-in and reach its optimum equilibrium. Once broken-in, the subwoofer will exhibit stronger bass performance, smoother response, and greater low-bass extension.
The Kicker 48DCVR122 replaces these items
- ported enclosure with two CompVR 12" subwoofers
- 2-ohm total impedance
- power handling: 100-800 watts RMS (1600 watts peak power)
3 questions already asked