About the Kicker 49L7X121

Product highlights:
- 12" subwoofer with dual 1-ohm voice coils
- double-pressed pulp cone with Santoprene rubber surround
- dual-spider suspension
- cast aluminum basket
- power handling: 2000 watts RMS (4000 watts peak)
- frequency response: 20-100 Hz
- sensitivity: 85.63 dB
- top-mount depth: 10.125"
- cutout width: 11.06"
- ported box volume: 3 cu. ft.
- Field-Replaceable Recone Kit available (sold separately)
- grille not included
- warranty: 2 years
- MFR # 49L7X121
- Item # 20649L7121
What's in the box:
Kicker 49L7X121 owner's manual
If you need assistance accessing this owner's manual, please give us a call.- One square 12" Dual 1-ohm voice coil subwoofer
- Information sheet with QR code to owner's manual
- 2 Kicker decals
- Template on box lid
More details on the Kicker 49L7X121

Features & specs
Features and Specs | ||
---|---|---|
Size | Square 12-inch | |
Impedance (Ohms) | 0.5, 2 | |
Cone Material | Pulp | |
Surround Material | Santoprene Rubber | |
Basket Material | Cast Aluminum | |
Grille | None included | |
Free-Air | No | |
Dual Voice Coil | Yes | |
Sensitivity |
85.63 dB at 1 watt | |
Frequency Response | 20 - 100 Hz | |
Max RMS Power Handling | 2000 | |
Peak Power Handling (Watts) | 4000 | |
Top Mount Depth (inches) | 10 1/8 | |
Bottom Mount Depth (inches) | N/A | |
Cutout Diameter or Length (inches) | 11 1/16 | |
Frame Width | 12.604 | |
Frame Length | 12.604 | |
Vas (liters) | 18.0484 | |
Fs (Hz) | 40.3 | |
Qts | 0.487 | |
Xmax (millimeters) | 31.25 | |
Parts Warranty | 2 Years | |
Labor Warranty | 2 Years | |
Box Requirements | ||
Ideal Sealed Box Volume (cubic feet) | N/A | |
Minimum Sealed Box Volume (cubic feet) | N/A | |
Maximum Sealed Box Volume (cubic feet) | N/A | |
Ideal Ported Box Volume (cubic feet) | 3 | |
Minimum Ported Box Volume (cubic feet) | 2 | |
Maximum Ported Box Volume (cubic feet) | 3.6 | |
Port diameter (inches) | N/A | |
Port length (inches) | N/A |
Product Research
Features
Dual Voice Coils: For increased system flexibility, the woofer has two 1Ω voice coils. When the voice coils are wired in parallel, the woofer presents a ½Ω load; when wired in series, the woofer presents a 2Ω load.
Square Design: By making the SoloX square, Kicker is giving you the most possible cone area (Sd) for a given size baffle, 16% to 20% more area than a conventional round subwoofer. More cone area means the cone moves more air, resulting in louder, deeper bass.
Terminals: There are two set screw terminals shorted to each spring terminal, making it easy to connect multiple subwoofers. Each terminal accepts bare wire up to 8-gauge.
Break-in Period: Due to the complex nature of Kicker's subwoofers, they require a break-in period in order to produce optimum bass response. The high-performance suspension system makes the speakers very stiff out-of-the-box. Approximately two weeks of daily playing will allow the suspension to break-in and reach its optimum equilibrium. A broken-in subwoofer will exhibit stronger bass performance, smoother response, and greater low-bass extension.
Enclosure: Kicker recommends a 3 ft³ ported enclosure with a 13" x 3½" x 36½" slot port, yielding a tuning frequency of 31 Hz.
Cutout: The woofer will not mount in a standard enclosure with a round cutout. Instead, the woofer must be mounted in an enclosure with a 11.06" x 11.06" square opening.
Loading...
Loading accessories...
Customer Q&A
2 questions already asked
Loading...
Loading articles...
Dude I love these guys . They rock
Alan from Broomfield, CO