About the Roswell R1 6.5" x 6.5" Vamp Spin Towers

Product highlights:
- twin 6-1/2" marine tower speakers (pair)
- each tower speaker houses two 6-1/2" woofers and two 1" silk tweeters
- weather-protected metal housing with UV protection
- built-in LED lighting (RGB controller not included)
- swiveling universal clamp system with adapters
- patented speaker spin technology allows second speaker to angle 180° from first
- black grilles
- sealed motor structure with Deutsch wiring harness included for water-tight connection
Specs:
- handles up to 160 watts RMS (320 watts peak power)
- frequency response: 60-20,000 Hz
- sensitivity: 90 dB
- impedance: 2 ohms
- dimensions: 16-7/16" W x 9-1/16" D x 12-5/8" H (w/bracket)
- warranty: 2 years
- MFR # C920-1821
- Item # 3511821
What's in the box:
Roswell R1 6.5" x 6.5" Vamp Spin Towers owner's manual
If you need assistance accessing this owner's manual, please give us a call.- Two dual 6.5" 2-way waketower speakers w/integrated mounting clamps
- Two 30" 6-pin wiring harnessess (Deutsch connector on one end / bare-ended wire on other end)
- Four 3" clamp inserts (installed)
- Four 2.375" clamp inserts
- Four 1.90" clamp inserts
- Two 6-pin Deutsch connectors
- Two 14" safety cables
- Two 3/4" Screws
- 2 Flat washers
- Twelve 18 ga. crimp-connectors
- Two 5/8"-11 Set screws
- Installation instructions
More details on the Roswell R1 6.5" x 6.5" Vamp Spin Towers

Features & specs
General | ||
---|---|---|
Tweeter Composition | Silk | |
Woofer Composition | Polypropylene | |
Woofer Surround | Rubber | |
Parts Warranty | 2 Years | |
Labor Warranty | 2 Years | |
Specifications | ||
Sensitivity |
90 dB at 1 watt | |
Style | Wakeboard tower | |
Frequency Response | 60Hz-20kHz | |
Max RMS Power Handling | 160 | |
Peak Power Handling (Watts) | 320 | |
Impedance (Ohms) | 2 |
Product Research
Features
Enclosure & Drivers: The Roswell R1 6.5" x 6.5" Vamp Spin Tower Speakers feature an all-weather 6-1/2"(6.5") 2-way marine speaker with an additional side-mounted 6-1/2" 2-way marine speaker that can be rotated up to 180˚, providing a very wide coverage area. Both speakers feature polypropylene woofer cones with a coaxially mounted 1" silk dome tweeter, and are housed in durable Centrex plastic enclosures designed to withstand the harsh marine environment.
Marine Tested: The R1 Series marine speakers are tested using ASTM standards, 500 hours UV exposure and 500 hours salt fog spray.
RGB LEDs: The R1 6.5" x 6.5" Vamp Spin Tower Speakers include built-in RGB LEDs around the speaker rim on both 2-way drivers, creating a glow on the speaker cones. Depending on what combination of LED wires is connected, the LEDs can light red, green, blue, yellow, magenta, cyan, or white. A 12 volt power supply is needed to turn the LEDs on. The LEDs can also be controlled using Roswell's RGB Remote Control (sold separately).
Wire Terminal: Each tower speaker includes a 30" 6-pin wiring harness that hold both the signal wires and LED power wires. The harnesses include a water tight Deutsch plug, for connecting to the tower speaker, with bare-ended 18 ga. wire on the other end. Both harnesses are encased in a heavy-duty rubber sheath for added protection.
Mounting: The R1 6.5" x 6.5" Vamp Spin Tower Speakers include an attached machine-billet, 360˚ Universal Clamp for attaching the speakers to wakeboard towers and rails. Three sets of clamp inserts are provided for attaching to 1.90", 2.375", and 3.0" diameter tubing.
Klippel Verified: The Klippel distortion analyzer, a device that uses a laser and sophisticated software to do large-scale analysis of drivers in motion, lets Roswell optimize the speaker's motor structure, voice coil alignment, and suspension to yield the best possible performance.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...