Chat
Contact us
Close contact box
Connect ID #
138 820 157 4
Connect ID #
138 820 157 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

Jensen Heavy Duty JHD62B Digital media receiver

Item # 522JHD62B

Get a heavy-duty stereo for your heavy-duty rig.

Find what Fits your vehicle

Remove

Checking fit...

Get a heavy-duty stereo for your heavy-duty rig.

Item # 522JHD62B

Ships free today

About the Jensen Heavy Duty JHD62B

Ken Nail

Heavy duty

The Jensen Heavy Duty Series JHD62B digital media receiver works where other car stereos fear to tread. It passes tough tests for humidity, electrostatic discharge, vibrations, and temperature fluctuations, while the sealed front panel is impervious to dirt, grime, and water. UV treatments protect it from sunlight, and the conformal-coated PCB circuit board protects the electronics inside. Look no further when you need a heavy-duty stereo for your heavy-duty rig.

Heavy duty

The Jensen Heavy Duty Series JHD62B digital media receiver works where other car stereos fear to tread. It passes tough tests for humidity, electrostatic discharge, vibrations, and temperature fluctuations, while the sealed front panel is impervious to dirt, grime, and water. UV treatments protect it from sunlight, and the conformal-coated PCB circuit board protects the electronics inside. Look no further when you need a heavy-duty stereo for your heavy-duty rig.

Road-ready entertainment and information

The JHD62B will keep the entertainment going while you work. Bluetooth® lets you enjoy your favorite music streams or podcasts, and provides the convenience of hands-free calling too. The rear USB port will keep your phone charged up while you're on the road (no music playback or phone control). Your favorite over-the-air radio stations are at your command with the AM/FM tuner. Worried about the weather? Get the latest info with the built-in Weather Band tuner.

Take it up a notch

If power is your priority, connect an amp or powered sub to the preamp outputs and bump up the volume. The bass and treble controls let you tailor the highs and lows to your taste, while the loudness button fattens up the sound for lower listening levels.

Bluetooth note: Use of this receiver's Bluetooth features will depend upon your phone's Bluetooth capabilities. Learn more in our article explaining Bluetooth profiles.

READ LESS

Product highlights:

    General features:
    • AM/FM receiver (no built-in CD player)
    • Weather Band tuner with NOAA weather alert
    • built-in Bluetooth:
      • hands-free calling - external mic required (item 522JMICHFP, sold separately)
      • audio streaming
    • dot-matrix LCD display
    • weather resistant:
      • IPx5 water-resistance rating
      • UV-treated face
      • conformal-coated circuit board
    • control from ASA Audio app (iOS and Android)
    Audio features:
    • bass and treble controls
    • loudness
    Expandability:
    • inputs: rear USB charging port (no music playback)
    • outputs: 2-channel preamp outputs (2-volt)
    Other features and specs:
    • built-in amplifier (25 watts RMS/45 peak x 4 channels)
    • 30-day preset memory when disconnected from power source
    • warranty: 1 year
    • MFR # JHD62B

    What's in the box:

    • Digital media receiver (15A fuse)
    • Sleeve (installed)
    • 2 Endcaps (pre-installed)
    • Wiring harness
    • 2 Radio removal tools
    • Quick Reference Guide
    • QR Code for Owner's Manual

    Customer reviews for Jensen Heavy Duty JHD62B

    We don't have any reviews, yet.
    Submit a review and then enter to win a $350 gift card.
    Be the first to review this product

    Loading reviews...

    Thanks for submitting your review

    Filter by rating

    Customer photos

    Customer provided image, click to load a larger version.
    Customer provided image, click to load a larger version.

    Sort reviews

    Sort by:
    Items per page:
    View page:

    Verified customer (What's this?)
    Verified employee review (What's this?)

    Reviewed on Samsung.com

    This review was collected as part of a promotion

    Pros:

    Cons:

    Crutchfield response
    Customer provided image, click to load a larger version.
    << >>

    More details on the Jensen Heavy Duty JHD62B

    Stacey B.

    Features & specs

    Expandability
    AUX Input No
    Audio/video Input ---
    USB Input Rear (Charge only)
    USB Port Power 1A
    Backup Camera Input No
    Second Camera Input No
    CarPlay No
    Android Auto No
    Siri Control No
    Alexa Voice Control N
    Android Control Yes
    Memory Card Slot N
    Bluetooth Compatible Built-in
    Satellite Radio Ready No
    HD Radio No
    Navigation ---
    iPod Compatibility
    Full size N/A
    Nano N/A
    Touch N/A
    iPhone N/A
    General
    RMS Power (CTA-2006) N/A
    RMS Power (Manufacturer) 25 watts
    Peak Output 45 watts
    RMS Power Bandwidth Not givenHz
    Preamp Outputs 2-channel
    Sub Preamp Outputs No
    Switchable Rear Preamp Outputs No
    Video Screen No
    Navigation App Compatible (iOS)
    Navigation App Compatible (Android)
    Preamp Voltage 2 volts
    Screen Size ---
    Screen Type ---
    Display Color Blue
    Key Button Color White
    EQ Bands None
    Wireless Remote No
    Steering Wheel Control Compatible No
    Parts Warranty 1 Year
    Labor Warranty 1 Year
    Tuner
    FM Sensitivity ---
    European Tuning Yes
    Seek/Scan Seek
    Radio Data System Yes
    File Playback
    Music File Playback N/A
    High-res Playback N
    The Jensen Heavy Duty JHD62B replaces these items:

    Product Research

    Heavy Duty Series
    AM/FM Radio + Weather Band Tuner
    Bluetooth & USB Integration
    Audio Section
    Display & Remote Features

    Heavy Duty Series

    Heavy Duty: The Jensen Heavy Duty Series JHD62B is an in-dash digital media receiver that has specifically designed, built, and tested to withstand even the harshest road and work conditions, such as humidity, electrostatic discharge, vibrations, and temperature fluctuations. Its entire front panel is an impervious membrane, preventing dirt and grime from accessing the control panel through pushbutton gaps. The head unit's conformal coated PCB board and heavy-duty design specification provides maximum durability under all conditions. The following tests are performed on Jensen's Heavy Duty in-dash receivers.

    • Water & UV Resistant: The JHD62B is IPX5-rated, making it resistant against water spray (cannot be submerged in water). The unit is also UV resistant.
    • Extreme Temperature & Humidity Test: Tested to ensure that the unit will fully function in -22° F to 158° F temperatures, as well as up to 95% relative humidity.
    • Vibration Test: Tested to withstand 4G's at 20-500Hz for 9 hours to ensure the unit can withstand the extreme environments most commonly met in heavy duty applications.
    • RF Performance Test: The RF Chamber test ensures that the stereo keeps clean signals in and the bad signal out, so you are always left with a steady signal without outside interference.
    • Electrostatic Discharge Test: The Electrostatic Discharge Test exposes the radio to up to 25 kilovolts to make sure it can withstand the most severe static build-up while you are out on the job.
    • Severe Electrical Environment Test: The Jensen Heavy Duty radio is designed to survive an alternator battery disconnection, because it is equipped with the necessary component to prevent "Load Dump" destruction.

    Single DIN Mounting: This unit is designed for installation in a vehicle with an existing 1-DIN radio opening. In many cases a special installation kit will be required to mount the radio to your vehicle's dashboard. The JHD62B features an integrated trim-ring (non-removable) and pre-installed cage (removable).

    2-Line Power System: The Jensen Heavy Duty series head unit features a 2-Line Power System which prevents battery drain when the vehicle is turned off.

    Non-Volatile Memory: The JHD62B's non-volatile memory saves your station presets and audio/user menu settings when the battery is disconnected.

    AM/FM Radio + Weather Band Tuner

    AM/FM Tuner: The JHD62B is equipped with an AM/FM tuner that can store up to 30 presets (12AM/18FM). You can search and store AM/FM stations manually or automatically. The head unit also offers Preset Scan which pauses the radio for 5 seconds at each preset station. You can select between North America or European tuning.

    RBDS (Radio Broadcast Data Service): This unit is equipped to display RBDS (Radio Broadcast Data Service) information when broadcast the radio station. The following LCD indicators appears when data is received.

    • RBDS: The current radio station is broadcasting RBDS data.
    • PTY: Program Type data is being sent. When flashing, PTY search is in progress. In FM mode you can use the following search options - Any, News, Information, Sports, Talk, Rock, Classic Rock, Adult Hits, Soft Rock, Top 40, Country, Oldies, Soft, Nostalgia, jazz, Classical, Rhythm & Blues, Soft Rhythm & Blues, Foreign Language, Religious Music, Religious Talk, Personality, Public, College, Weather, Emergency Test, Alarm.

    7-Channel Weather Band Tuner: The JHD62B is equipped with a built-in Weather Band tuner with NOAA weather alert. NOAA Weather Radio is a nationwide weather system that broadcasts local weather emergency information 24 hours a day. The US network has more than 530 stations covering the 50 states as well as the adjacent coast waters, Puerto Rico, the US Virgin Islands and the US Pacific Territories. Each local area has its own transmitting station and there are a total of seven broadcasting frequencies used. You can set the unit to automatically turn on when there is an NOAA alert.

    Frequency (MHz) Preset
    162.400 2
    162.425 4
    162.450 5
    162.475 3
    162.500 6
    162.525 -
    162.550 1
    Bluetooth & USB Integration

    Built-In Bluetooth: The Jensen JHD916BT is equipped with built-in Bluetooth, providing hands-free communication (HFP) and audio streaming (A2DP/AVRCP) for added convenience and safety. Before using the unit's Bluetooth functions, you must connect your Bluetooth enabled mobile phone or audio device to the JHD916BT via Secure Simple Pairing (SSP)..

    • Hands-Free Communication: The Jensen JHD916BT allows for wireless communication between the head unit and your Bluetooth enabled cell-phone using the Jensen Heavy Duty JMICHFP external omnidirectional microphone (522JMICHFP, sold separately). You can answer an incoming call from the head unit's front-panel controls. Incoming phone call information will be displayed on the JHD916BT's LCD screen. Your vehicle's speakers will mute automatically during a call. To dial a phone number, you will still need to use your mobile phone's keypad. There is no built-in mic.
    • Wireless Audio Streaming: The Jensen JHD916BT also allows you to play back stored music and streamed music from your Bluetooth-enabled smartphone, tablet, or other portable device using a Bluetooth connection. You can control basic playback functions (Play/Pause and Previous/Next Track) of your Bluetooth music from the JHD916BT. This unit will also display song/artist/album information (no album art) from your Bluetooth music.
    Note: Due to the differences in Bluetooth technology, some mobile devices may be incompatible, function improperly, or may not support all features when used with the JHD916BT.

    Rear-Panel USB Port: The rear-panel USB port (5V/1A) can be used to charge a small USB-enabled electronic device, such as your smartphone.

    Note: The unit's USB port does not support audio playback from USB storage devices, Apple iOS devices, or Android OS devices.
    Audio Section

    4Ch Amplifier: The Jensen Heavy Duty JHD62B is equipped with a 25 watts (RMS) / 45 watts (Peak) x 4-channel amplifier.

    2Ch/2V Preouts: The Jensen head unit features a set of 2V/2ch preamp outputs for connecting an external amplifier.

    Tone Controls: The JHD62B offers manual Bass & Treble adjustment, along with Balance & Fader. You can adjust the Bass (100Hz) and Treble (10kHz) independently from -10to +10 dB.

    Loudness: When listening to music at low volumes, this feature will boost the bass and treble ranges to compensate for the characteristics of human hearing.

    Beep Tone Confirmation: The in-dash head unit provides an audible beep to confirm button operation. This function can be turned On or Off.

    Display & Remote Features

    Full Dot Matrix LCD: The Jensen JHD62B features a full-dot matrix LCD display. You can adjust the brightness and contrast of the display, as well as toggle between Day & Night display settings.

    Button Illumination: The Jensen Heavy Duty series receiver features white backlit button illumination.

    ASA Audio App: The ASA Audio App (for Apple iOS and Android OS) allows you to wirelessly control the JHD62B head unit from your compatible Apple iOS or Android device via Bluetooth. The ASA Audio app lets you control source selection, playback functions and volume, as well as audio settings (such as Bass & Treble, Loudness, and Balance & Fader).

    Loading accessories...

    Customer Q&A

    Loading articles...

    Compare the sound