About the Rockford Fosgate P2-2X12
Standout performance
Rockford Fosgate's P2-2X12 ported enclosure offers the extra power handling of Punch P2 12" subs, so you and your passengers can rock out to powerful bass.
Bulletproof bass
The enclosure houses two Punch P2 12" subs, each with a paper cone that's reinforced with Kevlar fibers and supported by a rubber surround. The heavy-duty motor assemblies and advanced cooling vents allow these subs to handle up to 400 watts RMS each without flinching. The subs are internally wired for a 1-ohm total impedance, so make sure your amp can power this enclosure safely.
Advanced port design
Rugged 5/8" medium-density fiberboard construction means this enclosure will hold strong for fat, heavy bass. Industrial-grade black carpet provides a clean, finished look, and protects your trunk from nicks and scratches. The spring terminals will accept bare wire, pin connectors, or banana plugs. This enclosure uses an advanced port design that promotes generous air movement, while reducing distortion-causing port noise, so you hear louder, deeper bass. Add an amp and some wiring, and feel the thick low end this enclosure adds to your ride.
Product highlights:
- ported hatchback-style enclosure with two 12" Punch P2 subwoofers
- 5/8" medium density fiberboard construction covered with black carpet
- 1-ohm total impedance
- power handling: 300-800 watts RMS
- peak power: 1600 watts
- frequency response: 27-250 Hz
- sensitivity: 86 dB
- 33-7/8"W x 15-1/4"H x 16-5/8"D1 x 14"D2
- warranty: 1 year
- MFR # P2-2X12
What's in the box:
Rockford Fosgate P2-2X12 owner's manual
- Vented subwoofer enclosure loaded with two Punch P2D4-12 12" Woofers
- Installation and Operation Instructions
Reviews (37)
Customer reviews for Rockford Fosgate P2-2X12
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Rockford Fosgate P2-2X12
Features & specs
| General | ||
|---|---|---|
| Woofer Size (inches) | 12 | |
| Speakers Per Box | 2 | |
| Woofer Material | Kevlar/Paper | |
| Enclosure Type | Ported | |
| Color | Black | |
| Pieces in System | 1 | |
| Width (inches) | 33-7/8 | |
| Height (inches) | 15-1/4 | |
| Depth (inches) | 16-5/8 | |
| Connector Type | Spring post | |
| Frequency Response | 27-250 Hz | |
| Power Range (Watts RMS) | 800 | |
| Maximum Wattage | 1600 | |
| Sensitivity | 86 dB | |
| Impedance | 1 ohms | |
| Parts Warranty | 1 Year | |
| Labor Warranty | 1 Year | |
- MTX Thunder Square TS5512X2D
- Rockford Fosgate P3L-2X10
- Rockford Fosgate P3L-2X12
- Rockford Fosgate P2L-2X12
Product Research
Features
Punch Woofer: The enclosure houses two front-firing Rockford Fosgate Punch P2D4-12 12" subwoofers. Both woofers' dual 4-ohm voice coils are internally wired in parallel to present a 1-ohm load. The sub features a StampCast steel frame, a Kevlar fiber reinforced paper cone, and Santoprene surround. An anodized aluminum voice coil former and spider venting help keep the subwoofer cool.
Spider: Dual spiders made from tear and fatigue resistant poly-cotton improve mechanical stability under high excursion, maintaining consistent excursion characteristics.
Solid MDF Construction: The enclosure is constructed of high quality 5/8" MDF (medium-density fiberboard), which resists flexing and has anti-resonant qualities.
Vented Enclosure: The vented enclosure is aided by precision construction through computer design. The enclosure consists of two front firing 12" Punch P2 series subwoofers with a proprietary high-flow, low-noise port. The speaker terminals are located on the left side of the box (when facing the box). The box is covered in black carpet.
Tuned Port: The enclosure uses a front-firing proprietary high-flow, low-noise port to help produce deep and loud bass efficiently.
Box Carpeting: The enclosure is finished with high-density carpeting for superior durability. The carpet is black.
Speaker Terminal: The subwoofer enclosure uses one pair of high current, spring loaded binding posts. The binding posts are located on the left side of the box and will accept pin connectors, single or dual banana plugs, or bare wire up to 10 gauge.
Power Handling: The subwoofer can handle up to 800 watts RMS; 1600 watts peak power.
CEA-2031 Compliant: Power handling on the P2D2-12 subwoofer conforms to CEA-2031 industry standards. This means the subwoofer has the capacity to handle its rated power under continuous demand, not just for an instant.
Dimensions: The depth dimensions listed in Features & Specs include the subwoofer's trim ring, which adds approximately 7/8 of an inch. The depth of just the enclosure is 15-3/4 inches at the base and 13-1/8 inches at the top.
The Rockford Fosgate P2-2X12 replaces these items
- ported enclosure with two 12" dual voice coil subwoofers
- 2-ohm impedance
- frequency response: 31-150 Hz
- ported hatchback-style enclosure with two 10" Punch P3 woofers
- 5/8" medium density fiberboard construction covered with black carpet
- handles 800 watts RMS
- ported hatchback-style enclosure with two 12" Punch P3 woofers
- 5/8" medium density fiberboard construction covered with black carpet
- handles 1,000 watts RMS
- ported hatchback-style enclosure with two 12" Punch P2 woofers
- 5/8" medium density fiberboard construction covered with black carpet
- handles up to 500 watts RMS
Loading accessories...
Customer Q&A
19 questions already asked
Loading articles...
These subs hit you in your chest when the bass is up. They hit way hard and look and sound amazining thanks to the ported enclosure. If your thinking about buying these think no longer! Go set off some car alarms with these woofers my friend!
K from Utah