About the Rockford Fosgate R2SD2-10

Product highlights:
- 10" shallow-mount subwoofer with dual 2-ohm voice coils
- mica-injected polypropylene woofer cone with poly-foam surround
- stamped solid-steel frame
- power range: 100-200 watts RMS (400 watts peak power)
- frequency response: 45-250 Hz
- sensitivity: 82 dB
- top-mount depth: 3-7/16"
- sealed box volume: 0.7 cubic feet
- ported box volume: 1.4 cubic feet
- warranty: 1 year
- MFR # R2SD2-10
- Item # 575R2SD210
What's in the box:
Rockford Fosgate R2SD2-10 owner's manual
If you need assistance accessing this owner's manual, please give us a call.- One shallow-mount 10" Dual 2-ohm voice coil woofer
- Eight 1-1/8" Self-tapping screws
- 4mm Allen bit
- Installation and Operation manual (English/ French/ Spanish/ German)
More details on the Rockford Fosgate R2SD2-10

Features & specs
Features and Specs | ||
---|---|---|
Size | 10-inch | |
Impedance (Ohms) | 1, 4 | |
Cone Material | Mica injected Poly | |
Surround Material | Poly-Foam | |
Basket Material | --- | |
Grille | None included | |
Free-Air | No | |
Dual Voice Coil | Yes | |
Sensitivity |
83 dB at 1 watt | |
Frequency Response | 38 - 250 Hz | |
Max RMS Power Handling | 200 | |
Peak Power Handling (Watts) | 400 | |
Top Mount Depth (inches) | 3 7/16 | |
Bottom Mount Depth (inches) | N/A | |
Cutout Diameter or Length (inches) | 9 1/16 | |
Frame Width | 10.837 | |
Frame Length | 10.837 | |
Vas (liters) | 20.4 | |
Fs (Hz) | 38.1 | |
Qts | 0.68 | |
Xmax (millimeters) | 8 | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Box Requirements | ||
Ideal Sealed Box Volume (cubic feet) | 0.7 | |
Minimum Sealed Box Volume (cubic feet) | 0.5 | |
Maximum Sealed Box Volume (cubic feet) | 0.75 | |
Ideal Ported Box Volume (cubic feet) | 1.4 | |
Minimum Ported Box Volume (cubic feet) | 1.12 | |
Maximum Ported Box Volume (cubic feet) | 1.78 | |
Port diameter (inches) | 4 | |
Port length (inches) | 13.7 |
Product Research
Features
Shallow Mount Design: The Rockford Fosgate Prime R2 Shallow Subwoofer is designed and engineered with a much smaller motor assembly which reduces the overall depth of the woofer allowing it to fit in shallower enclosures and tighter locations of your vehicle.
Dual 2-ohm Voice Coils: This woofer features dual 2-ohm voice coils to offer wiring flexibility. When the voice coils are wired in parallel the woofer presents a 1-ohm load, when wired in series it presents a 4-ohm load.
Spring Post Assembly: The woofer features compression input terminals with attached 16-gauge stitched tinsel lead wires. The nickel plated spring posts will accept pin connectors, single banana plugs, and bare wire up to 12-gauge.
Sealed Box Volume: Rockford Fosgate recommends a sealed enclosure with an optimum internal volume of 0.7 cubic feet (from 0.5 to 0.75 cubic feet is acceptable). Sealed enclosures provide the most control over a woofer, will handle a lot of power, and provide accurate sonic reproduction, making them suitable to all types of music.
Vented Box Volume: Rockford Fosgate recommends a vented enclosure with an internal volume of 1.4 cubic feet using a 4" diameter x 13.7" long port tube; this yields a tuning frequency of 42 Hz. Ported (or vented) enclosures typically provide better overall efficiency than sealed so they are suitable for use with smaller amplifiers, giving you more bass output from less power. However, this efficiency comes at the expense of very low frequency output (below 35 Hz).
Loading...
Loading accessories...
Customer Q&A
5 questions already asked
Loading...
Loading articles...
Have 3 10 inch primes 2s in a Ford F150 Single cab, the box is sealed and theyre paired to a Sound ordance M.1500 (500watts) mono amp. At 2 ohms the subs are wired to 2.7 and they have amazing all around bass. Very deep and deserve more power.
Justice from Pass Christian Ms