Features

Solid 0.5% Silver Conductors: Solid conductors eliminate strand-interaction distortion and reduce jitter. Solid silver-plated conductors are excellent for very high-frequency applications. These signals, being such a high frequency, travel almost exclusively on the surface of the conductor. As the surface is made of high-purity silver, the performance is very close to that of a solid silver cable, but priced much closer to solid copper cable. This is an incredibly cost effective way of manufacturing very high-quality subwoofer cables.

Foamed-Polyethylene Insulation: Irish Red uses air-filled Foamed-Polyethylene Insulation on both conductors because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile. Thanks to all the air in Foamed-PE, it causes much less of the out-of-focus effect common to other materials.

Metal-Layer Noise-Dissipation System (NDS): AudioQuest's Noise-Dissipation System prevents a significant amount of RFI from reaching the equipment's ground plane.

Symmetrical Coax Geometry: Identical positive (+) and negative (-) conductors prevent the shield being used as an inferior audio conductor.

Cold-Welded Gold-Plated Plugs: This plug design allows for a connection without the use of solder, which is a common source of distortion. Because the ground shells are stamped instead of machined, the metal can be chosen for low distortion instead of machinability.

Grounding: If you hear noticeable hum in your system after connecting your subwoofer, please attach the subwoofer cable's ground leads to your audio gear. Some audio equipment have a ground (GND) connection on the back-panel, if not, attach the ground spade lugs to any screw on the equipment chassis of both the source and the subwoofer. Usually, this wire will not need to be connected.