About the Nuvo NV-2IC6 Series Two
Affordable in-ceiling sound
Affordable in-ceiling sound
Nuvo's NV-2IC6 in-ceiling speakers are an excellent, value-packed option for custom-installed sound systems. These speakers offer an affordable way to start an "invisible" two-channel music system in your listening room. Or you can add the pair as "height" channels to your existing home theater setup and add immersive Atmos® effects.
Each speaker features a 6-1/2" polypropylene woofer that deals out tight, controlled bass and mids, and a 1/2" silk dome tweeter for smooth highs. Together, those drivers deliver impactful sound that adds energy to your favorite films, TV shows, and games.
DIY installation
If this is a do-it-yourself install, check out our guide to installing in-ceiling speakers, along with our selection of in-wall speaker wire. During installation, the tweeter bridge can be used as a handle to make the speaker easier to manage. The included magnetic grille is paintable and fits flush with your ceiling.
Product highlights:
- 6-1/2" polypropylene woofer
- 1/2" pivoting silk dome tweeter
- tweeter is aimable to better direct high frequencies to your listening position
- tweeter bridge serves as a handle for holding speaker during installation
- frequency response: 60-20,000 Hz
- handles up to 50 watts RMS
- sensitivity: 86 dB
- impedance: 8 ohms
- rimless, paintable magnetic grille for seamless look
- cutout required: 8-3/16"
- overall diameter: 9-3/16"
- mounting depth: 3-15/16"
- weight: 3.62 lbs. (each)
- warranty: lifetime
- MFR # NV-2IC6
What's in the box:
Nuvo NV-2IC6 Series Two owner's manual
- 2 In-ceiling loudspeakers
- 2 Grilles
- Instruction Sheet
- Cutout Template
Reviews (8)
Customer reviews for Nuvo NV-2IC6 Series Two
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Nuvo NV-2IC6 Series Two
Features & specs
| Features | ||
|---|---|---|
| Quantity in Package | Pair | |
| Tweeter | Soft-Dome | |
| Aimable Tweeter | Yes | |
| Woofer Composition | Poly | |
| Woofer Surround | Rubber | |
| Connector Type | Spring clip | |
| Bi-Amp Inputs | No | |
| Built-in Back-box | No | |
| Moisture Resistance | ||
| Indoor (Moisture-resistant) | No | |
| Outdoor (Partial Exposure) | No | |
| Outdoor (Full Exposure) | No | |
| Specs | ||
| Tweeter Size | 0.5 | |
| Midrange Size | N/A | |
| Speaker Shape | Round | |
| Woofer Size | 6.5 | |
| Cutout Width | 8.0625 | |
| Cutout Height | 8.0625 | |
| Mounting Depth | 3.9375 | |
| Power Range (Watts) | up to 50 | |
| Sensitivity | 86 dB | |
| Impedance (Ohms) | 8 | |
| Frequency Response | 60-20kHz | |
| Parts Warranty | Lifetime | |
| Labor Warranty | Lifetime | |
Product Research
Features
2-Way Driver Design: The Legrand Nuvo Series Two NV-2IC6 in-ceiling loudspeaker utilizes a two-way driver design, featuring a 0.5" silk soft-dome tweeter that pivots and one 6.5" poly cone woofer with a butyl rubber surround. The pivoting tweeter is mounted to a unique bridge and allows you to aim the tweeter at your targeted listening area (approximately 10°).
Applications: The Nuvo Series Two NV-2IC6 in-ceiling loudspeaker serves well for home theater, two-channel stereo, and distributed audio applications. Thanks to its pivoting tweeter, the NV-2IC6 can be used as a front, center, and/or surround speaker in a home theater application.
Magnetic Grille: The Nuvo NV-2IC6 comes with a low-profile, rimless grille that attaches magnetically to the front-baffle of the in-ceiling speaker. The grille features a white finish, but can be painted to match your ceiling. The low-profile, magnetic grille only protrudes 0.1875" from the ceiling.
Spring-Clip Terminals: The Nuvo NV-2IC6 in-ceiling loudspeaker is outfitted with a set of spring-clip terminals to attach bare speaker wire (up to 12AWG) or pin-connectors.
Mounting Options: The Series Two NV-2IC6 requires a circular cutout in the ceiling that measures 8.0625" (diameter) x 3.9375" (depth). Three swivel "dog-leg" clamps with integrated mounting screws secure the speaker in the ceiling. There needs to be at least 0.75" of clearance around the inside of the cutout to accommodate the swivel "dog-leg" clamps. The "dog-leg" clamps will accommodate up to 1.5" drywall thickness.
Loading...
Loading accessories...
Customer Q&A
1 question already asked
Loading...
Loading articles...
Great speakers for the money! I used them as Atmos height channels and so far I'm very happy with their performance. Very easy to install also. They come with a template and simple directions. Highly recommend
Abel from Sulphur Springs, TX