Contact us
Close contact box
Connect ID #
121 050 526 4
Connect ID #
121 050 526 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

On-Q In-wall Cable Access Port (White)

Item # 717WP1014W

4 questions - 16 answers

Item # 717WP1014W

About the On-Q In-wall Cable Access Port

Use this cable port to easily access and conceal in-wall wiring. It's designed for use with HDMI, DVI, USB, RG-6, or CAT-5 cables. It mounts in a wall box or bracket.

Product highlights:

  • On-Q part # WP1014-WH-V1
  • cable access port
  • features one opening for cable run-through
  • includes attached standard decorator wall plate
  • mounts on On-Q wall box or bracket with provided screws
  • warranty: 1 year
  • MFR # WP1014WHV1

What's in the box:

  • White in-wall cable access port mounted to white Decora wall plate
  • 2 Self-tapping screws (Length=3/4")
  • 2 Machine screws
  • Instructions

Customer reviews for On-Q In-wall Cable Access Port

Loading reviews...

Average review:

5.0 out of 5 stars
32 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on

This review was collected as part of a promotion



Crutchfield response
Customer provided image, click to load a larger version.
<< >>

More details on the On-Q In-wall Cable Access Port

Stacey B.

Product Research


Overview: The On-Q In-Wall Cable Access Port consists of a WP1014 cable access strap with a Decora wall plate. It is white in color, and facilitates running A/V and computer cables inside of the wall. It is designed to work with a standard J-box.

Unterminated: The in-wall cable access port does not have terminals, but a 2-1/8" x 3/4" opening for cable access. The opening is protected by white nylon bristles for a clean look. Since the port is not made for any specific type of cable, virtually any type of cable can be used with this access port.

Loading accessories...

Customer Q&A

4 questions already asked

Would you need a backless bracket/junction box to adhere this too the drywall (for a finished wall)?
shmeeka  Aug 29, 2020
5 answers
a junction box is the correct way but you could probably glue it to a wall
travis  Aug 31, 2020
Yes, just an open back electrical box. Either blue or orange
kenneth  Aug 29, 2020
angel  Aug 29, 2020
I would use a bracket. if you are very careful you could cut a smaller hole and use wall anchors. But such an installation will be much more fragile. It may also make your hole size smaller than you want. Measure twice cut once.
james  Aug 29, 2020
matthew m  Aug 29, 2020
Will a regular 3 prong power cord (for a TV for example) fit through the opening?
michael  Jan 01, 2022
4 answers
no it will not work. the opening is to narrow.
todd  Jan 07, 2022
I like this design and have installed 5 of these. My experience is that it depends on the plug configuration. Some plugs will fit through but a 90 degree twist is required. On the "beefier" plugs, detaching the brushes (2 strips) from the rear of the plate is needed to create a larger temporary opening. After pulling the plug through, the brushes can be reattached. Depending on the device end connection, I've also found it simpler to use a fish tape (wire coat hanger works too) and pull the 110v line "up" since the device connection is often smaller than the 110v plug end. Hope this helps.
thomas  Jan 03, 2022
No, I had to run other end through.
rad  Jan 02, 2022
I mounted this on my ceiling and put the three prong plug from my projector through it without any trouble. It looks really good once installed.
john  Jan 02, 2022
will I be able to fit both hdmi and cat5 cables in the On-Q in wall cable access port?
michael  Aug 15, 2015
5 answers
Absolutely. There is a fair amount of space. I would estimate that you could place 4-5 well insulated HDMI cables through the opening.
david  Aug 16, 2015
Yes. I've got 2 HDMI cables and an optical audio cable running through mine with enough room for 2x that.
james  Aug 16, 2015
Yes, the only one that was hard to get through was the power cord just do that one first.
henry c  Aug 16, 2015
It's a pretty big opening ... I bet you could run 6-8 cables thru it
jeffrey  Aug 15, 2015
Yes, but it will also depend on what is behind the wall.
andrew  Aug 15, 2015
How big is the hole opening? Not the dimensions of the plate itself, but the dimensions of the hole you would put the cables through. Thanks!
casey  Jan 24, 2015
2 answers
3/4" wide by 2" long
todd  Jan 07, 2022
Use an old work box and pull cables into box then install port cover plate and pull cable through port opening.
george  Jan 25, 2015

Loading articles...

Compare the sound